Bright thermal (blackbody) emission of visible light from LnO (Ln = Pr, Tb), photoinduced by a NIR 980 nm laser.

The increasing demand for renewable energy has been promoting a rapid development of photovoltaic technologies. Given this, photoinduced thermal emission is being explored with the aim of improving solar cell performance by converting low-energy IR photons into visible light. Here, we report the light-induced blackbody emission from LnO2 (Ln = Pr and Tb) as a potential emitter for thermophotovoltaic applications.

Multifunctional System Polyaniline-Decorated ZIF-8 Nanoparticles as a New Chemo-Photothermal Platform for Cancer Therapy.

Polyaniline-decorated ZIF-8 nanoparticles (nPANI@nZIF-8) were easily synthesized and employed as a multifunctional system for the delivery of the antitumor drug 5-fluorouracil (5-FU). Because of the storage ability of the network ZIF-8, 68% of the total amount of the 5-FU drug was released at pH 5.2.

Random Lasing at Localization Transition in a Colloidal Suspension (TiO@Silica).

Anderson localization of light and random lasing in this critical regime is an open research frontier, which besides being a basic research topic could also lead to important applications. This article investigates the random laser action at the localization transition in a strongly disordered scattering medium composed of a colloidal suspension of core-shell nanoparticles (TiO@Silica) in ethanol solution of Rhodamine 6G. The classical superfluorescence band of the random laser was measured separately by collecting the emission at the back of the samples, showing a linear dependence with pumping fluence without gain depletion.

Size Control of Silver-Core/Silica-Shell Nanoparticles Fabricated by Laser-Ablation-Assisted Chemical Reduction.

Aqueous colloidal silver nanoparticles have substantial potential in biological application as markers and antibacterial agents and in surface-enhanced Raman spectroscopy applications. A simple method of fabrication and encapsulation into an inert shell is of great importance today to make their use ubiquitous. Here we show that colloids of silver-core/silica-shell nanoparticles can be easily fabricated by a laser-ablation-assisted chemical reduction method and their sizes can be tuned in the range of 2.

Anderson localization of light in a colloidal suspension (TiO2@silica).

In recent years, there has been dramatic progress in the photonics field in disordered media, ranging from applications in solar collectors, photocatalyzers, random lasing, and other novel photonic functions, to investigations into fundamental topics, such as light confinement and other phenomena involving photon interactions. This paper reports several pieces of experimental evidence of localization transition in a strongly disordered scattering medium composed of a colloidal suspension of core-shell nanoparticles (TiO2@silica) in ethanol solution. We demonstrate the crossover from a diffusive transport to a localization transition regime as the nanoparticle concentration is increased, and that an enhanced absorption effect arises at localization transition.

Synthesis of Ag@Silica Nanoparticles by Assisted Laser Ablation.

This paper reports the synthesis of silver nanoparticles coated with porous silica (Ag@Silica NPs) using an assisted laser ablation method. This method is a chemical synthesis where one of the reagents (the reducer agent) is introduced in nanometer form by laser ablation of a solid target submerged in an aqueous solution. In a first step, a silicon wafer immersed in water solution was laser ablated for several minutes.

Adsorption in a Fixed-Bed Column and Stability of the Antibiotic Oxytetracycline Supported on Zn(II)-[2-Methylimidazolate] Frameworks in Aqueous Media.

A metal-organic framework, Zn-[2-methylimidazolate] frameworks (ZIF-8), was used as adsorbent material to remove different concentrations of oxytetracycline (OTC) antibiotic in a fixed-bed column. The OTC was studied at concentrations of 10, 25 and 40 mg L(-1). At 40 mg L(-1), the breakthrough point was reached after approximately 10 minutes, while at 10 and 25 mg L(-1) this point was reached in about 30 minutes.

Desorption/ionization efficiencies of triacylglycerols and phospholipids via EASI-MS.

Knowledge of the major effects governing desorption/ionization efficiency is required for the development and application of ambient mass spectrometry. Although all triacylglycerols (TAG) have the same favorable protonation and cationization sites, their desorption/ionization efficiencies can vary dramatically during easy ambient sonic-spray ionization because of structural differences in the carbon chain. To quantify this somewhat surprising and drastic effect, we have performed a systematic investigation of desorption/ionization efficiencies as a function of unsaturation and length for TAG as well as for diacylglycerols, monoacylglycerols and several phospholipids (PL).

Novel core-shell (TiO2@Silica) nanoparticles for scattering medium in a random laser: higher efficiency, lower laser threshold and lower photodegradation.

There has been growing interest in scattering media in recent years, due to their potential applications as solar collectors, photocatalyzers, random lasers and other novel optical devices. Here, we have introduced a novel core-shell scattering medium for a random laser composed of TiO2@Silica nanoparticles. Higher efficiency, lower laser threshold and long photobleaching lifetime in random lasers were demonstrated.

Baseline resolution of isomers by traveling wave ion mobility mass spectrometry: investigating the effects of polarizable drift gases and ionic charge distribution.

We have studied the behavior of isomers and analogues by traveling wave ion mobility mass spectrometry (TWIM-MS) using drift-gases with varying masses and polarizabilities. Despite the reduced length of the cell (18 cm), a pair of constitutional isomers, N-butylaniline and para-butylaniline, with theoretical collision cross-section values in helium (ΩHe ) differing by as little as 1.2 Å(2) (1.

Separation of isomeric disaccharides by traveling wave ion mobility mass spectrometry using CO2 as drift gas.

The use of CO(2) as a massive and polarizable drift gas is shown to greatly improve peak-to-peak resolution (R(p-p) ), as compared with N(2) , for the separation of disaccharides in a Synapt G2 traveling wave ion mobility cell. Near or baseline R(p-p) was achieved for three pairs of sodiated molecules of disaccharide isomers, that is, cellobiose and sucrose (R(p-p)  = 0.76), maltose and sucrose (R(p-p)  = 1.

Investigating the potential of metal-organic framework material as an adsorbent for matrix solid-phase dispersion extraction of pesticides during analysis of dehydrated Hyptis pectinata medicinal plant by GC/MS.

Metal-organic frameworks aluminum terephthalate MIL-53 and Cu-benzene-1,3,5-tricarboxylate (BTC) were tested for extraction of pyrimethanil, ametryn, dichlofluanid, tetraconazole, flumetralin, kresoximmethyl, and tebuconazole from the medicinal plant Hyptis pectinata, with analysis using GC/MS in the selected ion monitoring mode. Experiments carried out at different fortification levels (0.1, 0.

Corrole isomers: intrinsic gas-phase shapes via traveling wave ion mobility mass spectrometry and dissociation chemistries via tandem mass spectrometry.

Corrole and four of its isomers with subtle structural changes promoted by exchange of nitrogen and carbon atoms in the corrole ring have been studied by traveling wave ion mobility mass spectrometry and collision induced dissociation experiments. Significant differences in shapes and charge distributions for their protonated molecules were found to lead to contrasting gas phase mobilities, most particularly for corrorin, the most "confused" isomer. Accordingly, corrorin was predicted by B3LYP/6-31g(d,p) and collisional cross section calculations to display the most compact tri-dimensional structure, whereas NCC4 and corrole were found to be the most planar isomers.

Protomers: formation, separation and characterization via travelling wave ion mobility mass spectrometry.

Travelling wave ion mobility mass spectrometry (TWIM-MS) with post-TWIM and pre-TWIM collision-induced dissociation (CID) experiments were used to form, separate and characterize protomers sampled directly from solutions or generated in the gas phase via CID. When in solution equilibria, these species were transferred to the gas phase via electrospray ionization, and then separated by TWIM-MS. CID performed after TWIM separation (post-TWIM) allowed the characterization of both protomers via structurally diagnostic fragments.

Wood typification by Venturi easy ambient sonic spray ionization mass spectrometry: the case of the endangered Mahogany tree.

Venturi easy ambient sonic spray ionization mass spectrometry in both its liquid (V(L) -EASI-MS) and solid sample modes (V(S) -EASI-MS) is shown to provide nearly immediate and secure typification of woods, as demonstrated for Mahogany, an endangered and most valuable type of tropical wood. This reddish wood displays unique phytochemical markers (phragmalin-type limonoids) which are rapidly detected from the wood surface by V(S) -EASI-MS or from a simple methanol extract of a tiny wood chip by V(L) -EASI-MS. Unique profiles were obtained for Mahogany (Swietenia macrophylla) whereas genuine samples of six other similar types of woods, which are commonly falsified by artificial coloring and commercialized as Mahogany, display also typical but dissimilar pythochemical profiles as compared to that of the authentic wood.

Resolution of isomeric multi-ruthenated porphyrins by travelling wave ion mobility mass spectrometry.

The ability of travelling wave ion mobility mass spectrometry (TWIM-MS) to resolve cationic meta/para and cis/trans isomers of mono-, di-, tri- and tetra-ruthenated supramolecular porphyrins was investigated. All meta isomers were found to be more compact than the para isomers and therefore mixtures of all isomeric pairs could be properly resolved with baseline or close to baseline peak-to-peak resolution (R(p-p)). Di-substituted cis/trans isomers were found, however, to present very similar drift times and could not be resolved.

Chemical profile of meta-chlorophenylpiperazine (m-CPP) in ecstasy tablets by easy ambient sonic-spray ionization, X-ray fluorescence, ion mobility mass spectrometry and NMR.

Meta-chlorophenylpiperazine (m-CPP) is a new illicit drug that has been sold as ecstasy tablets. Easy ambient sonic-spray ionization mass spectrometry (EASI-MS) and X-ray fluorescence spectrometry (XRF) are shown to provide relatively simple and selective screening tools to distinguish m-CPP tablets from tablets containing amphetamines (mainly 3,4-methylenedioxymethamphetamine (MDMA)). EASI-MS detects the active ingredients in their protonated forms: [m-CPP + H](+) of m/z 197, [MDMA + H](+) of m/z 194, and [2MDMA + HCl + H](+) of m/z 423 and other ions from excipients directly on the tablet surface, providing distinct chemical fingerprints.

Intrinsic mobility of gaseous cationic and anionic aggregates of ionic liquids.

Travelling-wave ion mobility mass spectrometry was used to measure the intrinsic mobility of a series of gaseous supra-cation and supra-anion aggregates of several ionic liquids. Close mobilities were observed in a T-wave cell filled with helium at ca. 0.

Coordination polymer adsorbent for matrix solid-phase dispersion extraction of pesticides during analysis of dehydrated Hyptis pectinata medicinal plant by GC/MS.

The coordination polymer [Zn(BDC)(H(2)O)(2)](n) was tested for extraction of pyrimethanil, ametryn, dichlofluanid, tetraconazole, flumetralin, kresoxim-methyl and tebuconazole from the medicinal plant Hyptis pectinata, with analysis using gas chromatography-mass spectrometry in selected ion monitoring mode (GC/MS, SIM). Experiments carried out at different fortification levels (0.1, 0.

Potential of a metal-organic framework as a new material for solid-phase extraction of pesticides from lettuce (Lactuca sativa), with analysis by gas chromatography-mass spectrometry.

The metal-organic framework (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] was tested for extraction of pyrimicarb, procymidone, malathion, methyl parathion and α- and β-endosulfan from lettuce, with analysis using GC/MS in SIM mode.

New homotrinuclear lanthanide complexes: synthesis, characterization and spectroscopic study.

This work presents the synthesis and spectroscopic study of new homotrinuclear (TRI) systems for photonics applications. The luminescence spectroscopy shows characteristics transitions of Eu(III) and Tb(III) ions. For the Gd(III) complexes, the triplets states were determined by phosphorescence measurement.

Analysis of biodiesel and biodiesel-petrodiesel blends by high performance thin layer chromatography combined with easy ambient sonic-spray ionization mass spectrometry.

High performance thin layer chromatography (HPTLC) combined with on-spot detection and characterization via easy ambient sonic-spray ionization mass spectrometry (EASI-MS) is applied to the analysis of biodiesel (B100) and biodiesel-petrodiesel blends (BX). HPTLC provides chromatographic resolution of major components whereas EASI-MS allows on-spot characterization performed directly on the HPTLC surface at ambient conditions. Constituents (M) are detected by EASI-MS in a one component-one ion fashion as either [M + Na](+) or [M + H](+).

Analysis of fuels via easy ambient sonic-spray ionization mass spectrometry.

The desorption and ionization of analytes directly from surfaces or natural matrices under ambient conditions has greatly simplified chemical analysis by mass spectrometry. Among the currently available set of such techniques, easy ambient sonic-spray ionization (EASI) is one of the simplest and most easily implemented. Fuels are among the most important and most complex classes of chemical mixtures and a challenge for fast and comprehensive chemical analysis.

Modeling, structural, and spectroscopic studies of lanthanide-organic frameworks.

In this paper, we report the hydrothermal synthesis of three lanthanide-organic framework materials using as primary building blocks the metallic centers Eu(3+), Tb(3+), and Gd(3+) and residues of mellitic acid: [Ln(2)(MELL)(H(2)O)(6)] (where Ln(3+) = Eu(3+), Tb(3+), and Gd(3); hereafter designated as (1), (2) and (3)). Structural characterization encompasses single-crystal X-ray diffraction studies, thermal analysis, and vibrational spectroscopy, plus detailed investigations on the experimental and predicted (using the Sparkle/AM1 model) photophysical luminescent properties. Crystallographic investigations showed that the compounds are all isostructural, crystallizing in the orthorhombic space group Pnnm and structurally identical to the lanthanum 3D material reported by the group of Williams.

Single-shot biodiesel analysis: nearly instantaneous typification and quality control solely by ambient mass spectrometry.

Using a simple and easily implemented desorption/ionization mass spectrometry technique, a tiny droplet of biodiesel placed on the surface of a sheet of paper is analyzed directly and nearly instantaneously under ambient conditions. No pre-separation or sample preparation is required, and clean mass spectra are obtained with great simplicity. In the positive ion mode, easy ambient sonic-spray ionization mass spectrometry, EASI(+)-MS, provides typical profiles of the major components of biodiesel samples, that is, either methyl esters (FAME) or ethyl esters (FAEE) of the natural fatty acids and triglycerides (TAG) from residual oil or oil from adulteration.