We report on precision spectroscopy of the 6s^{2} ^{1}S_{0}→6s6p ^{3}P_{1} intercombination line of mercury in the deep ultraviolet, by means of a frequency-comb referenced, wavelength-modulated, saturated absorption technique. This method allowed us to perform sub-Doppler investigations with an absolute frequency axis at 254 nm, while ensuring a relatively high signal-to-noise ratio. The absolute line center frequencies of the ^{200}Hg and ^{202}Hg bosonic isotopes were measured with a global uncertainty of 8 and 15 kHz (namely, 6.
View Article and Find Full Text PDFLamb dips of twenty lines in the P, Q, and R branches of the ν + ν + ν vibrational band of CH, in the spectral window of 7125-7230 cm, have been measured using an upgraded comb-calibrated frequency-stabilized cavity ring-down spectrometer, designed for extensive sub-Doppler measurements. Due to the large number of carefully executed Lamb-dip experiments, and to the extrapolation of absolute frequencies to zero pressure in each case, the combined average uncertainty of the measured line-center positions is 15 kHz (5 × 10 cm) with a 2-σ confidence level. Selection of the twenty lines was based on the theory of spectroscopic networks (SN), ensuring that a large number of transitions, measured previously by precision-spectroscopy investigations, could be connected to the and principal components of the SN of CH.
View Article and Find Full Text PDFModulation transfer spectroscopy is used to demonstrate absolute frequency stabilization of an 8.6-µm-wavelength quantum cascade laser against a sub-Doppler absorption of the molecule. The obtained spectral emission properties are thoroughly characterized through a self-referenced optical frequency comb, stabilized against either a GPS-disciplined Rb clock or a 1.
View Article and Find Full Text PDFWe realized a UV laser spectrometer at 253.7 nm for Doppler broadening thermometry on the - intercombination line in mercury vapors. Our setup is based on the two-stage duplication of a 1014.
View Article and Find Full Text PDFThe International Committee for Weights and Measures (CIPM), at its meeting in October 2017, followed the recommendation of the Consultative Committee for Units (CCU) on the redefinition of the kilogram, ampere, kelvin and mole. For the redefinition of the kelvin, the Boltzmann constant will be fixed with the numerical value 1.380 649 × 10 J K.
View Article and Find Full Text PDFLine intensities for carbon dioxide are measured with a novel spectroscopic approach, assisted by an optical frequency comb synthesizer for frequency calibration purposes. The main feature of the spectrometer consists in the exploitation of optical feedback from a V-shaped high-finesse optical resonator to effectively narrow a distributed feedback diode laser at the wavelength of 2 μm. Laser-gas interaction takes place inside an isothermal cell, which is placed on the transmission from the cavity.
View Article and Find Full Text PDFWe report on absolute measurements of saturated-absorption line-center frequencies of room-temperature trifluoromethane using a quantum cascade laser at 8.6 μm and the frequency modulation spectroscopy method. Absolute calibration of the laser frequency is obtained by direct comparison with a mid-infrared optical frequency comb synthesizer referenced to a radio-frequency Rb standard.
View Article and Find Full Text PDFPhilos Trans A Math Phys Eng Sci
March 2016
Previous research effort towards the determination of the Boltzmann constant has significantly improved the supporting theory and the experimental practice of several primary thermometry methods based on the measurement of a thermodynamic property of a macroscopic system at the temperature of the triple point of water. Presently, experiments are under way to demonstrate their accuracy in the determination of the thermodynamic temperature T over an extended range spanning the interval between a few kelvin and the copper freezing point (1358 K). We discuss how these activities will improve the link between thermodynamic temperature and the temperature as measured using the International Temperature Scale of 1990 (ITS-90) and report some preliminary results obtained by dielectric constant gas thermometry and acoustic gas thermometry.
View Article and Find Full Text PDFPhilos Trans A Math Phys Eng Sci
March 2016
Laser spectroscopy in the linear regime of radiation-matter interaction is a powerful tool for measuring thermodynamic quantities in a gas at thermodynamic equilibrium. In particular, the Doppler effect can be considered a gift of nature, linking the thermal energy to an optical frequency, namely the line centre frequency of an atomic or molecular spectral line. This is the basis of a relatively new method of primary gas thermometry, known as Doppler broadening thermometry (DBT).
View Article and Find Full Text PDFWe report a high-precision spectroscopic study of room-temperature trifluoromethane around 8.6 μm, using a CW quantum cascade laser phase-locked to a mid-infrared optical frequency comb. This latter is generated by a nonlinear down-conversion process starting from a dual-branch Er:fiber laser and is stabilized against a GPS-disciplined rubidium clock.
View Article and Find Full Text PDFFrequency fluctuations of an optical frequency standard at 1.39 µm have been measured by means of a highly-sensitive optical frequency discriminator based on the fringe-side transmission of a high finesse optical resonator. Built on a Zerodur spacer, the optical resonator exhibits a finesse of 5500 and a cavity-mode width of about 120 kHz.
View Article and Find Full Text PDFWe developed a high-precision spectroscopic system at 8.6 μm based on direct heterodyne detection and phase-locking of a room-temperature quantum-cascade-laser against an harmonic, 250-MHz mid-IR frequency comb obtained by difference-frequency generation. The ∼30 dB signal-to-noise ratio of the detected beat-note together with the achieved closed-loop locking bandwidth of ∼500 kHz allows for a residual integrated phase noise of 0.
View Article and Find Full Text PDFA dual laser absorption spectrometer operating at 1.39 μm was employed to acquire high-quality absorption spectra in coincidence with the 44,1 → 44,0 line of the H2 (18)O ν1 + ν3 band, at the temperature of the triple point of water. A rather sophisticated global fitting procedure was developed and used to simultaneously fit spectra across the explored pressure range, roughly between 1 and 4 Torr.
View Article and Find Full Text PDFWe report on a narrow-linewidth distributed-feedback quantum cascade laser at 8.6 μm that is optical-feedback locked to a high-finesse V-shaped cavity. The spectral purity of the quantum cascade laser is fully characterized using a high-sensitivity optical frequency discriminator, leading to a 1 ms linewidth of less than 4 kHz and a minimum laser frequency noise spectral density as low as 0.
View Article and Find Full Text PDFWe implemented an optical frequency standard based on noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) at 1.39 μm. The emission frequency of an extended-cavity diode laser was actively stabilized against the center of the 4(4,1)→4(4,0) transition of the H(2)(18)O ν1+ν3 band, under optical saturation conditions.
View Article and Find Full Text PDFWe report on a new implementation of Doppler broadening thermometry based on precision absorption spectroscopy by means of a pair of offset-frequency locked extended-cavity diode lasers at 1.39 μm. The method consists in the highly accurate observation of the shape of the 4(4,1)→4(4,0) line of the H2(18)O ν1+ν3 band, in a water vapor sample at thermodynamic equilibrium.
View Article and Find Full Text PDFComplementary tests of the partially correlated speed-dependent Keilson-Storer (pCSDKS) model for the shape of isolated transition of pure water vapor [N. H. Ngo et al.
View Article and Find Full Text PDFWe demonstrate coherent phase locking of a room-temperature continuous-wave quantum cascade laser (QCL) at 9.1 μm to a Tm-fiber laser frequency comb centered at 2 μm, with an integrated residual phase error of 0.9 rad (30 mHz to 1.
View Article and Find Full Text PDFThis work presents a very simple yet effective way to obtain direct referencing of a quantum-cascade-laser at 4.3 μm to a near-IR frequency-comb. Precise tuning of the comb repetition-rate allows the quantum-cascade-laser to be scanned across absorption lines of a CO2 gaseous sample and line profiles to be acquired with extreme reproducibility and accuracy.
View Article and Find Full Text PDFWe describe a continuous-wave diode laser spectrometer for water-vapour precision spectroscopy at 1.38 μm. The spectrometer is based upon the use of a simple scheme for offset-frequency locking of a pair of extended-cavity diode lasers that allows to achieve unprecedented accuracy and reproducibility levels in measuring molecular absorption.
View Article and Find Full Text PDFA comprehensive investigation of the frequency-noise spectral density of a free-running midinfrared quantum-cascade laser is presented for the first time. It provides direct evidence of the leveling of this noise down to a white-noise plateau, corresponding to an intrinsic linewidth of a few hundred hertz. The experiment is in agreement with the most recent theory on the fundamental mechanism of line broadening in quantum-cascade lasers, which provides a new insight into the Schawlow-Townes formula and predicts a narrowing beyond the limit set by the radiative lifetime of the upper level.
View Article and Find Full Text PDFWe report the frequency stabilization of a cw extended-cavity diode laser against saturated absorption lines of the H(2)O17 isotopologue of water vapor at around 1.384 microm. The saturation of rotovibrational transitions is achieved by filling a high-finesse optical resonator with H(2)O17 at low pressure and by locking the laser frequency to the resonator by using the Pound-Drever-Hall technique.
View Article and Find Full Text PDFAn intensity-stabilized diode laser absorption spectrometer was developed and used to perform a highly accurate study of the line shape of CO(2) absorption lines, in the spectral region around 5000 cm(-1), belonging to the nu(1) + 2nu(2)(0) + nu(3) combination band, at a temperature of 296.00 K. Standard and complex semiclassical models, including Dicke narrowing and speed-dependent broadening effects, were applied, tested, and compared in the pressure range between 0.
View Article and Find Full Text PDFThe frequency of a DFB quantum cascade laser (QCL) emitting at 4.3 microm has been long-term stabilized to the Lamb-dip center of a CO2 ro-vibrational transition by means of first-derivative locking to the saturated absorption signal. Thanks to the non-linear sum-frequency generation (SFG) process with a fiber-amplified Nd:YAG laser, the QCL mid-infrared (IR) radiation has been linked to an optical frequency-comb synthesizer (OFCS) and its absolute frequency counted with a kHz-level precision and an overall uncertainty of 75 kHz.
View Article and Find Full Text PDFWe report on a new optical implementation of primary gas thermometry based on laser-absorption spectrometry in the near infrared. The method consists in retrieving the Doppler broadening from highly accurate observations of the line shape of the R(12) nu1+2nu2(0)+nu3 transition in CO2 gas at thermodynamic equilibrium. Doppler width measurements as a function of gas temperature, ranging between the triple point of water and the gallium melting point, allowed for a spectroscopic determination of the Boltzmann constant with a relative accuracy of approximately 1.
View Article and Find Full Text PDF