Editorial for the Special Issue on Micro/Nanophotonic Devices in Europe.

Photonics has often been defined as the key technology of the 21st century [...

Sol-Gel Photonic Glasses: From Material to Application.

In this review, we present a short overview of the development of sol-gel glasses for application in the field of photonics, with a focus on some of the most interesting results obtained by our group and collaborators in that area. Our main attention is devoted to silicate glasses of different compositions, which are characterized by specific optical and spectroscopic properties for various applications, ranging from luminescent systems to light-confining structures and memristors. In particular, the roles of rare-earth doping, matrix composition, the densification process and the fabrication protocol on the structural, optical and spectroscopic properties of the developed photonic systems are discussed through appropriate examples.

An Introduction to Nonlinear Integrated Photonics: Structures and Devices.

The combination of integrated optics technologies with nonlinear photonics, which has led to growth of nonlinear integrated photonics, has also opened the way to groundbreaking new devices and applications. In a companion paper also submitted for publication in this journal, we introduce the main physical processes involved in nonlinear photonics applications and discuss the fundaments of this research area. The applications, on the other hand, have been made possible by availability of suitable materials with high nonlinear coefficients and/or by design of guided-wave structures that can enhance a material's nonlinear properties.

An Introduction to Nonlinear Integrated Photonics Devices: Nonlinear Effects and Materials.

The combination of integrated optics technologies with nonlinear photonics, which has led to the growth of nonlinear integrated photonics, has also opened the way to groundbreaking new devices and applications. Here we introduce the main physical processes involved in nonlinear photonics applications, and we discuss the fundaments of this research area, starting from traditional second-order and third-order phenomena and going to ultrafast phenomena. The applications, on the other hand, have been made possible by the availability of suitable materials, with high nonlinear coefficients, and/or by the design of guided-wave structures, which can enhance the material's nonlinear properties.

Editorial for the Special Issue on Nonlinear Photonics Devices.

There is some incertitude on the creation of the term "photonics" and some ambiguity about its frontiers (and differences with respect to optoelectronics and electro-optics) [...

Photonic Crystal Stimuli-Responsive Chromatic Sensors: A Short Review.

Photonic crystals (PhC) are spatially ordered structures with lattice parameters comparable to the wavelength of propagating light. Their geometrical and refractive index features lead to an energy band structure for photons, which may allow or forbid the propagation of electromagnetic waves in a limited frequency range. These unique properties have attracted much attention for both theoretical and applied research.

Editorial for the Special Issue on Glassy Materials Based Microdevices.

Glassy materials, i.e., glasses and most polymers, play a very important role in microtechnologies and photonics[.

About the Implementation of Frequency Conversion Processes in Solar Cell Device Simulations.

Solar cells are electrical devices that can directly convert sunlight into electricity. While solar cells are a mature technology, their efficiencies are still far below the theoretical limit. The major losses in a typical semiconductor solar cell are due to the thermalization of electrons in the UV and visible range of the solar spectrum, the inability of a solar cell to absorb photons with energies below the electronic band gap, and losses due to the recombination of electrons and holes, which mainly occur at the contacts.

Ag-Sensitized Yb Emission in Glass-Ceramics.

Rare earth doped materials play a very important role in the development of many photonic devices, such as optical amplifiers and lasers, frequency converters, solar concentrators, up to quantum information storage devices. Among the rare earth ions, ytterbium is certainly one of the most frequently investigated and employed. The absorption and emission properties of Yb ions are related to transitions between the two energy levels ²F (ground state) and ²F (excited state), involving photon energies around 1.

Glassy Microspheres for Energy Applications.

Microspheres made of glass, polymer, or crystal material have been largely used in many application areas, extending from paints to lubricants, to cosmetics, biomedicine, optics and photonics, just to mention a few. Here the focus is on the applications of glassy microspheres in the field of energy, namely covering issues related to their use in solar cells, in hydrogen storage, in nuclear fusion, but also as high-temperature insulators or proppants for shale oil and gas recovery. An overview is provided of the fabrication techniques of bulk and hollow microspheres, as well as of the excellent results made possible by the peculiar properties of microspheres.

Efficient frequency generation in phoXonic cavities based on hollow whispering gallery mode resonators.

We report on nonlinear optical effects on phoxonic cavities based on hollow whispering gallery mode resonators pumped with a continuous wave laser. We observed stimulated scattering effects such as Brillouin and Raman, Kerr effects such as degenerated and non-degenerated four wave mixing, and dispersive wave generation. These effects happened concomitantly.

THz Pyro-Optical Detector Based on LiNbO₃ Whispering Gallery Mode Microdisc Resonator.

This study analyzes the capabilities of a LiNbO₃ whispering gallery mode microdisc resonator as a potential bolometer detector in the THz range. The resonator is theoretically characterized in the stationary regime by its thermo-optic and thermal coefficients. Considering a Q-factor of 10⁷, a minimum detectable power of 20 μW was evaluated, three orders of magnitude above its noise equivalent power.

Optical Microbubble Resonators with High Refractive Index Inner Coating for Bio-Sensing Applications: An Analytical Approach.

The design of Whispering Gallery Mode Resonators (WGMRs) used as an optical transducer for biosensing represents the first and crucial step towards the optimization of the final device performance in terms of sensitivity and Limit of Detection (LoD). Here, we propose an analytical method for the design of an optical microbubble resonator (OMBR)-based biosensor. In order to enhance the OMBR sensing performance, we consider a polymeric layer of high refractive index as an inner coating for the OMBR.

Resonance Frequency of Optical Microbubble Resonators: Direct Measurements and Mitigation of Fluctuations.

This work shows the improvements in the sensing capabilities and precision of an Optical Microbubble Resonator due to the introduction of an encaging poly(methyl methacrylate) (PMMA) box. A frequency fluctuation parameter σ was defined as a score of resonance stability and was evaluated in the presence and absence of the encaging system and in the case of air- or water-filling of the cavity. Furthermore, the noise interference introduced by the peristaltic and the syringe pumping system was studied.

Biosensing by WGM Microspherical Resonators.

Whispering gallery mode (WGM) microresonators, thanks to their unique properties, have allowed researchers to achieve important results in both fundamental research and engineering applications. Among the various geometries, microspheres are the simplest 3D WGM resonators; the total optical loss in such resonators can be extremely low, and the resulting extraordinarily high Q values of 10⁸-10⁸ lead to high energy density, narrow resonant-wavelength lines and a lengthy cavity ringdown. They can also be coated in order to better control their properties or to increase their functionality.

Stimulated Stokes and Antistokes Raman Scattering in Microspherical Whispering Gallery Mode Resonators.

Dielectric microspheres can confine light and sound for a length of time through high quality factor whispering gallery modes (WGM). Glass microspheres can be thought as a store of energy with a huge variety of applications: compact laser sources, highly sensitive biochemical sensors and nonlinear phenomena. A protocol for the fabrication of both the microspheres and coupling system is given.

Generation of hyper-parametric oscillations in silica microbubbles.

Cavity resonant enhanced stimulated Raman scattering (SRS), four-wave mixing, and broadband hyper-parametric oscillation in silica microbubble whispering gallery mode resonators (WGMR) in forward and backward directions are reported in this Letter. We show that microbubbles can operate not only in a highly ideal two-photon emission regime, but also generate combs, both natively and multi-mode spaced. The nonlinear process is phase matched because of the interaction of different mode families of the resonator.

Confocal reflectance microscopy for determination of microbubble resonator thickness.

Optical Micro Bubble Resonators (OMBR) are emerging as new type of sensors characterized by high Q-factor and embedded micro-fluidic. Sensitivity is related to cavity field penetration and, therefore, to the resonator thickness. At the state of the art, methods for OMBR's wall thickness evaluation rely only on a theoretical approach.

Stimulated anti-Stokes Raman scattering resonantly enhanced in silica microspheres.

Efficient stimulated anti-Stokes Raman scattering has been observed in silica microspherical resonators pumped by CW laser. This process is observed in the normal dispersion regime. The lack of correlation between stimulated anti-Stokes and Stokes scattering spectra indicates that the signal has to be resonant with the cavity.

Tailoring of the free spectral range and geometrical cavity dispersion of a microsphere by a coating layer.

The modal dispersion of a whispering gallery mode (WGM) resonator is a very important parameter for use in all nonlinear optics applications. In order to tailor the WGM modal dispersion of a microsphere, we have coated a silica microsphere with a high-refractive-index coating in order to study its effect on the WGM modal dispersion. We used Er(3+) ions as a probe for a modal dispersion assessment.

About the role of phase matching between a coated microsphere and a tapered fiber: experimental study.

Coatings of spherical optical microresonators are widely employed for different applications. Here the effect of the thickness of a homogeneous coating layer on the coupling of light from a tapered fiber to a coated microsphere has been studied. Spherical silica microresonators were coated using a 70SiO(2)- 30HfO(2) glass doped with 0.

High quality factor 1-D Er³⁺-activated dielectric microcavity fabricated by RF-sputtering.

Rare earth-activated 1-D photonic crystals were fabricated by RF-sputtering technique. The cavity is constituted by an Er3+-doped SiO2 active layer inserted between two Bragg reflectors consisting of ten pairs of SiO2/TiO2 layers. Scanning electron microscopy is employed to put in evidence the quality of the sample, the homogeneities of the layers thickness and the good adhesion among them.

Optimization of pump absorption in MOF lasers via multi-long-period gratings: design strategies.

Different strategies for designing optical couplers, optimized to enhance the pump absorption in the rare-earth-doped core of microstructured fiber lasers, are illustrated. Three kinds/configurations of optical couplers have been designed and compared as examples of the different design strategies which can be followed. Their effectiveness to enhance the performance of an ytterbium-doped, double cladding, microstructured optical fiber laser has been accurately simulated.

Optical microspherical resonators for biomedical sensing.

Optical resonators play an ubiquitous role in modern optics. A particular class of optical resonators is constituted by spherical dielectric structures, where optical rays are total internal reflected. Due to minimal reflection losses and to potentially very low material absorption, these guided modes, known as whispering gallery modes, can confer the resonator an exceptionally high quality factor Q, leading to high energy density, narrow resonant-wavelength lines and a lengthy cavity ringdown.

Hybrid microspheres for nonlinear Kerr switching devices.

Electronic Kerr effect in a polyfluorene derivative is used to reversibly switch near infrared probe beam resonantly coupled to a hybrid polymer-silica microspherical resonator. NIR pumping at 780 nm in pulsed laser regime is used for non-linear switching of the WGM resonances that shift as much as 2 GHz for 50 mW of average pump power, compared to a shift of 250 MHz for the same average pump power at CW regime. The absence of temporal drift and the magnitude of this shift confirm the Kerr nature of the switching, ruling out thermooptical effects.