New MMO coatings for electro-refinery applications: Promoting the production of carboxylates.

Within the new circular economy paradigm, this work evaluates the performance of tailored mixed metal oxides (MMO) anodes, based on ruthenium and antimony, for their application into an electrochemically-assisted organic refinery process. This process is designed to transform pollutants into value-added products with minimal mineralization. Oxidation of synthetic wastes consisting of phenol solutions was used to validate the electrochemical conversion of phenolic wastes into carboxylates, which are then considered as bricks to be used for electrosynthesis or to produce fuels.

Toxicological aspect of water treated by chlorine-based advanced oxidation processes: A review.

As well established in the literature, residual toxicity is an important parameter for evaluating the sanitary and environmental safety of water treatment processes, and this parameter becomes even more crucial when chlorine-based processes are applied for water treatment. Eliminating initial toxicity or preventing its increase after water treatment remains a huge challenge mainly due to the formation of highly toxic disinfection by-products (DBPs) that stem from the degradation of organic contaminants or the interaction of the chlorine-based oxidants with different matrix components. In this review, we present a comprehensive discussion regarding the toxicological aspects of water treated using chlorine-based advanced oxidation processes (AOPs) and the recent findings related to the factors influencing toxicity, and provide directions for future research in the area.

Recent advances on modified reticulated vitreous carbon for water and wastewater treatment - A mini-review.

Recently, modifications on reticulated vitreous carbon (RVC) have attracted attention as a promising strategy to produce low-cost, stable, and highly active electrodes leading to significant advances in the water/wastewater treatment field compared with raw RVC. Modified RVC materials have been used as cathode, anode, and membrane. Improvements on physical and electrocatalytic properties are achieved by RVC modification via diverse strategies, including the deposition of metal oxides, the introduction of surface functional groups, and the formation of composites, which were used to remove organic contaminants and pathogens from water matrices, as summarized in this mini-review.

Towards a higher photostability of ZnO photo-electrocatalysts in the degradation of organics by using MMO substrates.

In this work, it is proposed a novel strategy to increase the photostability of the ZnO photoelectrocatalyst under prolonged light irradiation, without the addition or deposition of metals and/or semiconductor oxides during their synthesis. This strategy is based on the use of a mixed metal oxide (MMO-RuTiO) coating as the substrate for the electrodeposition of ZnO. To assess it, the electrodeposition of ZnO films on Ti and Ti/MMO substrates and the photoelectrocatalytic activity of these materials for the degradation of the herbicide clopyralid were studied.

Improved 4-nitrophenol removal at Ti/RuO-SbO-TiO laser-made anodes.

In this study, binary and ternary mixed metal oxide anodes of Ti/RuO-SbO and Ti/RuO-SbO-TiO were prepared using two different heating methods: conventional furnace and alternative CO laser heating. The produced anodes were physically and electrochemically characterized by using different techniques. The main difference found in the laser-made anodes was their more compact morphology, without the common deep cracks found in anodes made by typical thermal decomposition, which showed an important correlation with the prolonged accelerated service life.

Biodegradability improvement of clopyralid wastes through electrolysis using different diamond anodes.

The use of boron-doped (BDDs) anodes for efficient removal of complex organic molecules, such as organochlorine compounds, is well stated in the literature. However, the role of the different characteristics of this anode on the transformation of these type of contaminants into more biodegradable molecules is a topic of interest that need to be clarified when aimed an efficient combination of an electrochemical system as a previous step to biological treatment. In this work, improvement in the biodegradability of synthetic wastes polluted with clopyralid, as an organochlorine model compound, is studied after electrolysis with different BDDs in the presence of the two most common supporting electrolytes (containing sulfate or chloride ions).

Photoelectrolysis of clopyralid wastes with a novel laser-prepared MMO-RuOTiO anode.

This paper studies the applicability of a novel laser-prepared mixed metal oxide (MMO-RuOTiO) anode in the photoelectrochemical degradation of clopyralid, a toxic and biorefractory herbicide. Results are compared to those obtained using the well-known boron-doped diamond (BDD) anode and demonstrate that, although the electrolysis with diamond is more effective than that obtained with the new electrode, the irradiation of UVC light makes the novel MMO material more effective in chloride media. It was explained in terms of the homolysis of hypochlorous acid/hypochlorite to form chloride and hydroxyl radicals.