Hierarchical Self-Assembly of Supramolecular Double-Comb Triblock Terpolymers.

Involving supramolecular chemistry in self-assembling block copolymer systems enables design of macromolecular architectures that are challenging to obtain through conventional all-covalent routes. In this work we present supramolecular double-comb triblock terpolymers in which both outer blocks are able to interact with a surfactant via hydrogen bonding and thereby form a comb-shaped architecture upon complexation. While the neat triblock terpolymer only formed a triple lamellar morphology, multiple hierarchical structures were observed in these supramolecular comb-coil-comb triblock terpolymers by simply adjusting the surfactant concentration.

The Origin of Hierarchical Structure Formation in Highly Grafted Symmetric Supramolecular Double-Comb Diblock Copolymers.

Involving supramolecular chemistry in self-assembling block copolymer systems enables design of complex macromolecular architectures that, in turn, could lead to complex phase behavior. It is an elegant route, as complicated and sensitive synthesis techniques can be avoided. Highly grafted double-comb diblock copolymers based on symmetric double hydrogen bond accepting poly(4-vinylpyridine)-block-poly(N-acryloylpiperidine) diblock copolymers and donating 3-nonadecylphenol amphiphiles are realized and studied systematically by changing the molecular weight of the copolymer.

Hierarchical Layer Engineering Using Supramolecular Double-Comb Diblock Copolymers.

The formation of unusual multilayered parallel lamellae-in-lamellae in symmetric supramolecular double-comb diblock copolymers is presented. While keeping the concentration of surfactant fixed, the number of internal layers was found to increase with molecular weight M up to 34 for the largest block copolymer. The number of internal structures n was established to scale as M and therefore enables easy design of such structures with great precision.

Highly Ordered Structure Formation in RAFT-Synthesized PtBOS-b-P4VP Diblock Copolymers.

Linear poly(4-tert-butoxystyrene)-b-poly(4-vinylpyridine) (PtBOS-b-P4VP) diblock copolymers are synthesized using reversible addition-fragmentation chain transfer polymerization. The self-assembly of four different PtBOS-b-P4VP diblock copolymers is studied using small-angle X-ray scattering and transmission electron microscopy and a number of interesting observations are made. A tBOS62 -b-4VP28 diblock copolymer with a weight fraction P4VP of 0.

Bioinspired Synthesis of Well-Ordered Layered Organic-Inorganic Nanohybrids: Mimicking the Natural Processing of Nacre by Mineralization of Block Copolymer Templates.

The unique mechanical performance of nacre, the pearly internal layer of shells, is highly dependent on its complex morphology. Inspired by the structure of nacre, the fabrication of well-ordered layered inorganic-organic nanohybrids is presented herein. This biomimetic approach includes the use of a block copolymer template, consisting of hydrophobic poly(vinylidene fluoride) (PVDF) lamellae covered with hydrophilic poly(methacrylic acid) (PMAA), to direct silica (SiO2 ) mineralization.

Gyroid nickel nanostructures from diblock copolymer supramolecules.

Nanoporous metal foams possess a unique combination of properties - they are catalytically active, thermally and electrically conductive, and furthermore, have high porosity, high surface-to-volume and strength-to-weight ratio. Unfortunately, common approaches for preparation of metallic nanostructures render materials with highly disordered architecture, which might have an adverse effect on their mechanical properties. Block copolymers have the ability to self-assemble into ordered nanostructures and can be applied as templates for the preparation of well-ordered metal nanofoams.

Shear-induced orientation of gyroid PS-b-P4VP(PDP) supramolecules.

The phase behavior of block copolymer based supramolecular complexes polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS-b-P4VP(PDP) complexes are found to self-assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers.

Poly(vinylidene fluoride)/nickel nanocomposites from semicrystalline block copolymer precursors.

The fabrication of nanoporous poly(vinylidene fluoride) (PVDF) and PVDF/nickel nanocomposites from semicrystalline block copolymer precursors is reported. Polystyrene-block-poly(vinylidene fluoride)-block-polystyrene (PS-b-PVDF-b-PS) is prepared through functional benzoyl peroxide initiated polymerization of VDF, followed by atom transfer radical polymerization (ATRP) of styrene. The crystallization of PVDF plays a dominant role in the formation of the block copolymer structure, resulting in a spherulitic superstructure with an internal crystalline-amorphous lamellar nanostructure.

Supramolecular route to well-ordered metal nanofoams.

Metal nanofoams with a porosity above 50% v/v have recently attracted great interest in materials science due to their interesting properties. We demonstrate a new straightforward route to prepare such nanofoams using diblock copolymer-based PS-block-P4VP(PDP) supramolecules that self-assemble into a bicontinuous gyroid morphology, consisting of PS network channels in a P4VP(PDP) matrix. After dissolving the PDP, the P4VP collapses onto the PS struts and a free-standing bicontinuous gyroid template of 50-100 μm thickness and interconnected, uniformly sized pores is formed.

Hierarchical self-assembly of two-length-scale multiblock copolymers.

The self-assembly in diblock copolymer-based supramolecules, obtained by hydrogen bonding short side chains to one of the blocks, as well as in two-length-scale linear terpolymers results in hierarchical structure formation. The orientation of the different domains, e.g.

Nanoporous network channels from self-assembled triblock copolymer supramolecules.

Supramolecular complexes of a poly(tert-butoxystyrene)-block-polystyrene-block-poly(4-vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self-assemble into a core-shell gyroid morphology with the core channels formed by the hydrogen-bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well-ordered nanoporous films that were used as templates for nickel plating.

Annealing-induced changes in double-brush Langmuir-Blodgett films of alpha-helical diblock copolypeptides.

The effect of annealing on the structure and the helix orientation in Langmuir-Blodgett (LB) monolayers of diblock copolymers (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) with unidirectional helix orientation deposited on hydrophilic silicon substrates was characterized by means of small-angle X-ray reflectivity, transmission Fourier transform infrared spectroscopy, and atomic force microscopy. Upon annealing at 100 degrees C for 24 h, the alpha-helices became less tilted toward the substrate surface normal. Surface area shrinkage accompanied the change in tilt, indicated by an increase in both film thickness and electron density, resulting in more compact and uniform films.

Dipping-induced azimuthal helix orientation in Langmuir-Blodgett monolayers of alpha-helical amphiphilic diblock copolypeptides.

The azimuthal helix orientation of the rigid-rod amphiphilic diblock copolypeptides (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) in Langmuir-Blodgett (LB) monolayers was investigated using polarized transmission Fourier transform infrared spectroscopy. The relative position of dipping with respect to the previous transfer position can be used to manipulate the azimuthal orientation of the helices parallel to or tilted by an angle of 45 degrees with respect to the dipping direction in the transferred films. The study of the azimuthal order for the LB monolayers of PLGA-b-PMLGSLGs of various block lengths revealed that the observed effect arises mainly from the deformation of the PMLGSLG top brush layer, induced by the flow orientation around the transfer region.

Surface potentials in Langmuir monolayers of unidirectionally oriented alpha-helical diblock copolypeptides.

The surface potentials and effective dipole moments of alpha-helical amphiphilic diblock copolypeptides during monolayer compression at the air-water interface are reported. Amphiphilic diblock copolypeptides (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) of various block lengths were studied during the double-brush formation process at the water surface. Upon monolayer spreading of PLGA-b-PMLGSLGs, surface potentials of hundreds of millivolts were recorded, attributed to the dipole moments of water molecules reorienting due to interactions with the monolayers.

Nonmonotonic incommensurability effects in lamellar-in-lamellar self-assembled multiblock copolymers.

Using the self-consistent-field theory numerical procedure we find that the period D of the lamellar-in-lamellar morphology formed in symmetric multiblock copolymer melts A(mN/2)(B(N/2)A(N/2))(n)B(mN/2) at intermediate segregations changes nonmonotonically with an increase in the relative tail length m. Therewith D reveals, as a function of the Flory chi-parameter, a drastic change in the vicinity of the internal structure formation, which can be both a drop and a rise, depending on the value of m. It is argued that the unusual behavior found is a particular case of a rather general effect of the incommensurability between the two length scales that characterize the system under consideration.

Nonconventional morphologies in two-length scale block copolymer systems beyond the weak segregation theory.

The order-disorder and order-order transitions (ODT and OOT) in the linear multiblock copolymers with two-length scale architecture A(fmN)(B(N2)A(N2))(n)B((1-f)mN) are studied under intermediate cooling below the ODT critical point where a nonconventional sequence of the OOTs was predicted previously [Smirnova et al., J. Chem.

4-(4-Ethyl-phenyl-diazen-yl)phenol.

The crystal structure of the title compound, C(14)H(14)N(2)O, determined at 100 K, shows that the mol-ecules are not planar in the solid state, in contrast to other diazene (azobenzene) derivatives. The dihedral angle between the planes of the two aromatic rings is 42.32 (7)°.

Tailoring of the hierarchical structure within electrospun fibers due to supramolecular comb-coil block copolymers: polystyrene-block-poly(4-vinyl pyridine) plasticized by hydrogen bonded pentadecylphenol.

Previously we demonstrated hierarchical self-assembly and mesoporosity in electrospun fibers using selected polystyrene--poly(4-vinylpyridine) (PS--P4VP) diblock copolymers with hydrogen-bonded 3--pentadecylphenol (PDP), which rendered distorted spherical P4VP(PDP) domains within the PS matrix, internal lamellar order within the P4VP(PDP) domains, and allowed distorted spherical pores by removing PDP (. 2005, , 1048). Here we study whether the internal structure of electrospun fibers can be systematically tailored by varying the compositions of PS--P4VP(PDP).

Microphase separation in multiblock copolymer melts: Nonconventional morphologies and two-length-scale switching.

The phase behavior of AfmN(BN2AN2)B(1-fmN) multiblock copolymer melts is studied within the weak segregation theory. The interplay between ordering on different length scales is shown to cause dramatic changes both in the ordered phase symmetry and periodicity upon small variation of the architectural parameters of the macromolecules. Phase diagrams are presented in the (f,chiN) plane (chi is the Flory-Huggins parameter) for various values of the architecture parameters n and m.

Nanorod engineering by reinforcing hexagonally self-assembled PS-b-P4VP(DDP) with PPE.

Nanorods consisting of a polystyrene core and a poly(4-vinylpyridine) shell produced the self-assembly route of comb-shaped supramolecules exhibit very poor mechanical properties. Adding a sufficient amount of poly(2,6-dimethyl-1,4-diphenyl oxide) introduces entanglements to the PS-core resulting in nanorods with much better properties, which can be used as templates for transition metal oxide tubes.

Self-assembled polymeric solid films with temperature-induced large and reversible photonic-bandgap switching.

In aqueous solutions the response of polymers and biological matter to external conditions, such as temperature and pH, is typically based on the hydrophobic/hydrophilic balance and its effects on the polymer conformation. In the solid state, related concepts using competing interactions could allow novel functions. In this work we demonstrate that polymeric self-assembly, reversibility of hydrogen bonding, and polymer-additive phase behaviour allow temperature response in the solid state with large and reversible switching of an optical bandgap.

Two new polymorphs of diphenyl(4-pyridyl)methyl methacrylate.

The title compound (D4PyMA), C(22)H(19)NO(2), exhibits polymorphism after crystallization by slow evaporation from a binary mixture of chloroform and hexane. Long needle-like crystals have an orthorhombic structure (space group Fdd2), with one molecule in the asymmetric unit, while small tablet-like crystals exhibit a monoclinic crystal structure (space group P2(1)/n), in which two independent but chemically identical molecules comprise the asymmetric unit. The bond lengths and angles are normal, while the torsion angles around the -C-O- bond linking the diphenyl(4-pyridyl)methyl and methacrylate groups show the flexibility of the molecule by way of packing effects.

Hierarchical self-assembly in polymeric complexes: towards functional materials.

Combination of self-assembly at different length scales leads to structural hierarchies. It offers rich possibilities to construct nanostructured matter, nanoscale parts, and switching (responsive) properties based on the phase transitions of the self-assembled structures. Complexation of oligomeric amphiphiles to polymers using ionic interactions, coordination, or hydrogen bonding leads to polymeric comb-shaped supramolecules (complexes), which self-assemble at a length scale of a few nm.

Smart materials based on self-assembled hydrogen-bonded comb-shaped supramolecules.

Block copolymer self-assembly and supramolecular chemistry can be combined most naturally to prepare smart polymer nanomaterials. An attractive route is based on comb-shaped supramolecules, obtained by attaching side chains to (co)polymers by physical (non-covalent) interactions. Hydrogen bonding is a key element of our approach.