Solvent controlled 2D structures of bottom-up fabricated nanoparticle superlattices.

We demonstrate that oleyl phosphate ligand-stabilized iron oxide nanocubes as building blocks can be assembled into 2D supercrystalline mono- and multilayers on flat YSZ substrates within a few minutes using a simple spin-coating process. As a bottom-up process, the growth takes place in a layer-by-layer mode and therefore by tuning the spin-coating parameters, the exact number of deposited monolayers can be controlled. Furthermore, scanning electron and atomic force microscopy as well as X-ray reflectivity measurements give evidence that the choice of solvent allows the control of the lattice type of the final supercrystalline monolayers.

Influence of water and protein content on the creep behavior in dental enamel.

The creep behavior of untreated and deproteinized dental enamel in dry and wet state was analyzed by nanoindentation with a spherical tip. Additionally, the influence of the loading rate was investigated. Dry untreated and deproteinized dental enamel only showed minor creep over 100 s and deproteinization did not affect the dry enamel's behavior significantly.

Strengthening Engineered Nanocrystal Three-Dimensional Superlattices via Ligand Conformation and Reactivity.

Nanocrystal assembly into ordered structures provides mesostructural functional materials with a precise control that starts at the atomic scale. However, the lack of understanding on the self-assembly itself plus the poor structural integrity of the resulting supercrystalline materials still limits their application into engineered materials and devices. Surface functionalization of the nanobuilding blocks with organic ligands can be used not only as a means to control the interparticle interactions during self-assembly but also as a reactive platform to further strengthen the final material via ligand cross-linking.

Tailoring Disorder and Quality of Photonic Glass Templates for Structural Coloration by Particle Charge Interactions.

To obtain high-quality homogeneous photonic glass-based structural color films over large areas, it is essential to precisely control the degree of disorder of the spherical particles used and reduce the crack density within the films as much as possible. To tailor the disorder and quality of photonic glasses, a heteroaggregation-based process was developed by employing two oppositely charged equal-sized polystyrene (PS) particle types. The influence of the particle size ratio on the extent of heteroaggregation in the suspension mixes is investigated and correlated with both the morphology and the resultant optical properties of the films.

Direct writing of colloidal suspensions onto inclined surfaces: Optimizing dispense volume for homogeneous structures.

Hypothesis: A process to fabricate structures on inclined substrates has the potential to yield novel applications for colloidal-based structures. However, for conventional techniques, besides the coffee ring effect (CRE), anisotropic particle deposition along the inclination direction (IE) is expected to occur. We hypothesize that both effects can be inhibited by reducing the dispense volume during printing by direct writing.

Deformation Behavior of Cross-Linked Supercrystalline Nanocomposites: An in Situ SAXS/WAXS Study during Uniaxial Compression.

With the ever-expanding functional applications of supercrystalline nanocomposites (a relatively new category of materials consisting of organically functionalized nanoparticles arranged into periodic structures), it becomes necessary to ensure their structural stability and understand their deformation and failure mechanisms. Inducing the cross-linking of the functionalizing organic ligands, for instance, leads to a remarkable enhancement of the nanocomposites' mechanical properties. It is however still unknown how the cross-linked organic phase redistributes applied loads, how the supercrystalline lattice accommodates the imposed deformations, and thus in general what phenomena govern the overall material's mechanical response.

Controlling the Large-Scale Fabrication of Supraparticles.

Controlling the nanoscale interactions of colloidal building blocks is a key step for the transition from single nanoparticles to tailor-made, architected morphologies and their further integration into functional materials. Solvent evaporation-induced self-assembly within emulsion droplets emerges as a fast, versatile, and low-cost approach to obtain spherical, complex structures, such as supraparticles. Nevertheless, some process-structure relationships able to describe the effects of emulsion conditions on the synthesis outcomes still remain to be understood.

Mapping the Mechanical Properties of Hierarchical Supercrystalline Ceramic-Organic Nanocomposites.

Multiscale ceramic-organic supercrystalline nanocomposites with two levels of hierarchy have been developed via self-assembly with tailored content of the organic phase. These nanocomposites consist of organically functionalized ceramic nanoparticles forming supercrystalline micron-sized grains, which are in turn embedded in an organic-rich matrix. By applying an additional heat treatment step at mild temperatures (250-350 °C), the mechanical properties of the hierarchical nanocomposites are here enhanced.

The geometrical structure of interfaces in dental enamel: A FIB-STEM investigation.

In this study a high resolution structural analysis revealed that enamel prisms are surrounded by an interface that is discontinuous with frequent mineral to mineral contact separated by gaps. This contact manifests either by crystallites bridging the boundary between prismatic and interprismatic enamel or continuous crystallites curving and bridging the interprismatic enamel to the prisms. The geometrical resolution of this TEM investigation of the interfaces is ≤2 nm as a basis for micromechanical models.

Modulating the Mechanical Properties of Supercrystalline Nanocomposite Materials via Solvent-Ligand Interactions.

Supercrystalline nanocomposite materials with micromechanical properties approaching those of nacre or similar structural biomaterials can be produced by self-assembly of organically modified nanoparticles and further strengthened by cross-linking. The strengthening of these nanocomposites is controlled via thermal treatment, which promotes the formation of covalent bonds between interdigitated ligands on the nanoparticle surface. In this work, it is shown how the extent of the mechanical properties enhancement can be controlled by the solvent used during the self-assembly step.

Fracture toughness of porous materials - Experimental methods and data.

We provide numerical experimental data and detailed information about the sample preparation and the experimental methods, used by different research groups for measuring the fracture toughness of porous materials. These data are supplemental information to the publication "A Geometric Model for the Fracture Toughness of Porous Materials," [1], which is based on experimental data of ceramic and polymer materials. For the sake of completeness, we provide here also data from fracturing metallic foams.

Iron oxide-based nanostructured ceramics with tailored magnetic and mechanical properties: development of mechanically robust, bulk superparamagnetic materials.

Nanostructured iron-oxide based materials with tailored mechanical and magnetic behavior are produced in bulk form. By applying ultra-fast heating routines spark plasma sintering (SPS) to supercrystalline pellets, materials with an enhanced combination of elastic modulus, hardness and saturation magnetization are achieved. Supercrystallinity - namely the arrangement of the constituent nanoparticles into periodic structures - is achieved through self-assembly of the organically-functionalized iron oxide nanoparticles.

Hierarchical supercrystalline nanocomposites through the self-assembly of organically-modified ceramic nanoparticles.

Biomaterials often display outstanding combinations of mechanical properties thanks to their hierarchical structuring, which occurs through a dynamically and biologically controlled growth and self-assembly of their main constituents, typically mineral and protein. However, it is still challenging to obtain this ordered multiscale structural organization in synthetic 3D-nanocomposite materials. Herein, we report a new bottom-up approach for the synthesis of macroscale hierarchical nanocomposite materials in a single step.

Dataset of ptychographic X-ray computed tomography of inverse opal photonic crystals produced by atomic layer deposition.

This data article describes the detailed parameters for synthesizing mullite inverse opal photonic crystals via Atomic Layer Deposition (ALD), as well as the detailed image analysis routine used to interpret the data obtained by the measurement of such photonic crystals, before and after the heat treatment, via Ptychographic X-ray Computed Tomography (PXCT). The data presented in this article are related to the research article by Furlan and co-authors entitled "Photonic materials for high-temperature applications: Synthesis and characterization by X-ray ptychographic tomography" (Furlan et al., 2018).

On the systematic documentation of the structural characteristics of bovine enamel: A critic to the protein sheath concept.

The common structural description of bovine enamel used in materials science studies - nano-sized hydroxyapatite crystallites form micron-sized prisms surrounded by protein sheaths, which in turn build a complex decussation pattern - overlook many important morphological information. This hampers the correct interpretation of the data determined by mechanical analysis. For a profound structural description of enamel morphology, the visualization of its building blocks by high-resolution electron microscopy and focused-ion beam tomography technique, which reveals their form, orientation and configuration at different regions of a tooth (cut in different directions), is undertaken in this work.

Exceptionally strong, stiff and hard hybrid material based on an elastomer and isotropically shaped ceramic nanoparticles.

In this work the fabrication of hard, stiff and strong nanocomposites based on polybutadiene and iron oxide nanoparticles is presented. The nanocomposites are fabricated via a general concept for mechanically superior nanocomposites not based on the brick and mortar structure, thus on globular nanoparticles with nanosized organic shells. For the fabrication of the composites oleic acid functionalized iron oxide nanoparticles are decorated via ligand exchange with an α,ω-polybutadiene dicarboxylic acid.

Metal Nanoparticle Growth within Clay-Polymer Nacre-Inspired Materials for Improved Catalysis and Plasmonic Detection in Complex Biofluids.

Recent studies have shown that layered silicate clays can be used to form a nacre-like bioinspired layered structure with various polymer fillers, leading to composite films with good material strength, gas-barrier properties, and high loading capacity. We go one step further by in situ growing metal nanoparticles in nacre-like layered films based on layered silicate clays, which can be used for applications in plasmonic sensing and catalysis. The degree of anisotropy of the nanoparticles grown in the film can be controlled by adjusting the ratio of clay to polymer or gold to clay and reducing agent concentration, as well as silver overgrowth, which greatly enhances the surface enhanced Raman scattering activity of the composite.

Determination of the packing fraction in photonic glass using synchrotron radiation nanotomography.

Photonic glass is a material class that can be used as photonic broadband reflectors, for example in the infrared regime as thermal barrier coating films. Photonic properties such as the reflectivity depend on the ordering and material packing fraction over the complete film thickness of up to 100 µm. Nanotomography allows acquiring these key parameters throughout the sample volume at the required resolution in a non-destructive way.

Shear Strength and Interfacial Toughness Characterization of Sapphire-Epoxy Interfaces for Nacre-Inspired Composites.

The common tensile lap-shear test for adhesive joints is inappropriate for brittle substrates such as glasses or ceramics where stress intensifications due to clamping and additional bending moments invalidate results. Nevertheless, bonding of glasses and ceramics is still important in display applications for electronics, in safety glass and ballistic armor, for dental braces and restoratives, or in recently developed bioinspired composites. To mechanically characterize adhesive bondings in these fields nonetheless, a novel approach based on the so-called Schwickerath test for dental sintered joints is used.

Mechanical behavior of enamel rods under micro-compression.

Exploring the structural strategies behind the optimized mechanical performance of hierarchical materials has been a focal point of extensive research over the past decades. Dental enamel is one such natural material, comprising a complicated hierarchical structure with a high level of mineral content. Bundles of hydroxyapatite nanofibers (level-1) Ø: 50nm form enamel rods (level-2) Ø: 5µm, which constitute bands (level-3) Ø: 50µm.

Bottom-up Fabrication of Multilayer Stacks of 3D Photonic Crystals from Titanium Dioxide.

A strategy for stacking multiple ceramic 3D photonic crystals is developed. Periodically structured porous films are produced by vertical convective self-assembly of polystyrene (PS) microspheres. After infiltration of the opaline templates by atomic layer deposition (ALD) of titania and thermal decomposition of the polystyrene matrix, a ceramic 3D photonic crystal is formed.

Organically linked iron oxide nanoparticle supercrystals with exceptional isotropic mechanical properties.

It is commonly accepted that the combination of the anisotropic shape and nanoscale dimensions of the mineral constituents of natural biological composites underlies their superior mechanical properties when compared to those of their rather weak mineral and organic constituents. Here, we show that the self-assembly of nearly spherical iron oxide nanoparticles in supercrystals linked together by a thermally induced crosslinking reaction of oleic acid molecules leads to a nanocomposite with exceptional bending modulus of 114 GPa, hardness of up to 4 GPa and strength of up to 630 MPa. By using a nanomechanical model, we determined that these exceptional mechanical properties are dominated by the covalent backbone of the linked organic molecules.

Large-scale parallel alignment of platelet-shaped particles through gravitational sedimentation.

Parallel and concentric alignment of microscopic building blocks into several orders of magnitude larger structures is commonly observed in nature. However, if similarly aligned structures are artificially produced their thickness is generally limited to just about one or two orders of magnitude more than the dimensions of the smallest element. We show that sedimentation provides a promising approach to manufacture solid materials consisting of well-aligned platelet-shaped particles while being more than 30,000 times thicker than the individual particle.

Influence of structural hierarchy on the fracture behaviour of tooth enamel.

Tooth enamel has the critical role of enabling the mastication of food and also of protecting the underlying vital dentin and pulp structure. Unlike most vital tissue, enamel has no ability to repair or remodel and as such has had to develop robust damage tolerance to withstand contact fatigue events throughout the lifetime of a species. To achieve such behaviour, enamel has evolved a complex hierarchical structure that varies slightly between different species.