A randomized, controlled, two-month pilot trial of stannous fluoride dentifrice versus sodium fluoride dentifrice after oxalate treatment for dentinal hypersensitivity.

Objectives: To compare the effects of a stannous fluoride dentifrice and a sodium fluoride dentifrice on dentinal hypersensitivity when used with an oxalate-based regimen combining in-office and at-home treatment.

Materials And Methods: In this single-center, randomized, controlled, double-blind, pilot clinical trial, 30 subjects were professionally treated at baseline with a 3% oxalate/potassium salt solution on up to two target teeth, then randomized 1:1 to either 0.454% stannous fluoride or 0.

Jumpstart Mirror Trainer: A New Device for Teaching Mirror Skills to First-Year Dental Students.

Learning indirect vision with a dental mirror is challenging and can be overwhelming for beginning dental students. The Jumpstart Mirror Trainer is a new device that allows students to become proficient with mirror use before the start of preclinic without requiring in-class practice sessions. The aim of this study, conducted in 2017, was to compare the effectiveness of the Jumpstart Mirror Trainer with the Mirroprep for teaching indirect motor skills.

A randomized, controlled comparison of two professional dentin desensitizing agents immediately post-treatment and 2 months post-treatment.

Purpose: To compare the desensitizing effects of two different marketed professional dentin hypersensitivity treatments, a 5% sodium fluoride varnish and an oxalic acid/potassium salt solution, in a single-center, randomized, controlled, subject-blind pilot study.

Methods: A total of 22 subjects with dentin hypersensitivity on at least two teeth were recruited from a general dentistry practice and randomized 1:1 to treatment with a 5% sodium fluoride varnish (Acclean Fluoride Varnish) group or a 3% oxalic acid/potassium salt solution (Super Seal Desensitizer). The study population was predominantly female (91%) and Caucasian (77%).

Effect of instruction, light curing unit, and location in the mouth on the energy delivered to simulated restorations.

Purpose: To determine the amount of energy (Joules/cm²) delivered by students to simulated restorations in a patient simulator based on the restoration location, the curing light unit used, and before vs. after instruction on how to improve their light curing technique.

Methods: 30 dental students "light cured" two simulated restorations (that were 1-mm deep anterior and 4-mm deep posterior) using three light-curing units (LCUs) : VALO, Bluephase G2, and Optilux 401.

Biocompatibility study of lithium disilicate and zirconium oxide ceramics for esthetic dental abutments.

Purpose: The increasing demand for esthetically pleasing results has contributed to the use of ceramics for dental implant abutments. The aim of this study was to compare the biological response of epithelial tissue cultivated on lithium disilicate (LS) and zirconium oxide (ZrO) ceramics. Understanding the relevant physicochemical and mechanical properties of these ceramics will help identify the optimal material for facilitating gingival wound closure.

The Benefit of a Switch: Answer-Changing on Multiple-Choice Exams by First-Year Dental Students.

The aim of this study was to determine if dental students would benefit from changing their initial responses to what they have deemed to be more suitable answers during high-stakes multiple-choice examinations. Students are often advised to stay with their first answers despite evidence from other fields suggesting this is not the best course for obtaining optimal final exam scores. Data were collected for 160 first-year DMD students in fall 2013 for three operative dentistry and four biochemistry exams at Tufts University School of Dental Medicine.

Creation and Initial Outcomes of a Selective Four-Year Research Program for Predoctoral Dental Students.

Educators agree that dental students' involvement in research plays an important role in their development and contributes to the future of dental education. However, dental schools are challenged to provide the time and support necessary to nurture their students in undertaking research activities. The aim of this study was to examine student participation in a predoctoral student research program at one U.

Clinical Significance of Bis-GMA and HEMA Orthodontic Resins Bonding to Enamel and Ceramic Materials.

The advancement of new ceramic materials for dental crowns has prompted the need for improved methods of bonding orthodontic brackets to these surfaces. Currently, lithium-disilicate is the primary material being used for anterior crowns, while zirconia is the primary material being used in the posterior. The purpose of this study was to compare the shear bond strength of HEMA (Assure® Universal Bonding Resin) and bis-GMA (Assure® PLUS All Surface Bonding Resin) orthodontic bonding resins on enamel, lithium-disilicate, and zirconia materials.

Use of Oxalate Strips in Dentistry: Overall Response and Case Studies With Recent and Longstanding Sensitivity.

Practice-based research was conducted to assess professional in-office treatment of dentin hypersensitivity with a strip-based device as part of a recall visit. The study population came from two sources within the dental practice. The majority were recall patients with evident sensitivity that was observed during routine care, while others were patients with history of dentin hypersensitivity in dental records.

Electrodeposited silk coatings for bone implants.

The aim of this study was to characterize the mechanical properties and drug elution features of silk protein-based electrodeposited dental implant coatings. Silk processing conditions were modified to obtain coatings with a range of mechanical properties on titanium studs. These coatings were assessed for adhesive strength and dissolution, with properties tuned using water vapor annealing or glycerol incorporation to modulate crystalline content.

Thermal effects on pulp due to laser and handpiece usage.

Objective: The study was designed to compare changes in pulpal temperature during ablation of dental hard tissue while using two established erbium dental laser systems, a new CO2 laser system, and a conventional high-speed handpiece.

Methods: Eighty non-carious human extracted molars were separated into four sample groups of 20 teeth each. Three laser systems were used, respectively, to ablate the occlusal surface of the teeth in three of the groups for 60 seconds each.

Silk electrogel coatings for titanium dental implants.

The aim of this study was to develop biocompatible, biodegradable dental implant coatings capable of withstanding the mechanical stresses imparted during implant placement. Two techniques were developed to deposit uniform silk fibroin protein coatings onto dental implants. Two novel coating techniques were implemented to coat titanium shims, studs, and implants.

Effects of surface treatments and cement types on the bond strength of porcelain-to-porcelain repair.

Purpose: The purpose of this in vitro study was to evaluate the effects of four surface treatments and two resin cements on the repair bond strength of a ceramic primer.

Materials And Methods: Eighty-eight pairs of disks (10 and 5 mm in diameter, 3 mm thickness) were prepared from heat-pressed feldspar ceramics (GC Initial IQ). After being stored in mucin-artificial saliva for 2 weeks, the 10-mm disks were divided into four surface treatment groups (n = 22) and then treated as follows: (1) no treatment (control); (2) 40% phosphoric acid; (3) 5% hydrofluoric acid + acid neutralizer + 40% phosphoric acid; (4) silica coating (CoJet-sand) + 40% phosphoric acid.

Using dental students' preclinical performance as an indicator of clinical success.

The purpose of this study was to evaluate part of one dental school's predoctoral curriculum by investigating correlations between students' final grades in two preclinical courses and their performance in the related clinical courses. The sample consisted of 301 students at Tufts University School of Dental Medicine who graduated in 2010 and 2011. All final grades used as data were obtained from the Registrar's Office and evaluated anonymously.

Comparison of the effect of two interdental cleaning devices around implants on the reduction of bleeding: a 30-day randomized clinical trial.

Objective: To determine the effectiveness of a water flosser in reducing the bleeding on probing (BOP) index around dental implants as compared to flossing.

Methods And Materials: Patients with implants were randomly assigned to one of two groups in this examiner-masked, single-center study. The study compared the efficacy of a manual toothbrush paired with either traditional string floss or a water flosser.

Comprehensive analysis of aerobic and anaerobic bacteria found on dental bib clips.

Multiple-use dental bib clips are considered to present relatively low risks for transmitting infections and, thus, are thought to only require disinfection between patient visits. This study was designed to: 1) determine the presence and composition of bacterial contaminants on reusable rubber-faced metal bib clips after dental treatment at the hygiene clinic at Tufts University School of Dental Medicine and 2) evaluate the effectiveness of the disinfection for this clip type. Aerobic and anaerobic bacterial contaminant loads on the surfaces of the clips were investigated immediately after hygiene treatments were rendered and again after clips were disinfected.

Do bib clips pose a cross-contamination risk at the dental clinic?

Although multiple-use dental napkin holders have a relatively low risk of transmitting infection, they do require disinfection between patients. This study sought to: 1) determine the presence of bacterial load on two types of clips of reusable bib chains after dental procedures at the Endodontics and Orthodontics clinics at Tufts University School of Dental Medicine; and 2) evaluate the effectiveness of disinfecting the clips. These specialty clinics represent a wide spectrum of patients, procedures, and appointment times.

Two-year evaluation indicates zirconia bridges acceptable alternative to PFMs.

Objective: The aim of this in-vivo study was to evaluate the 2-year clinical performance of zirconia computer-aided design/computer-aided manufacturing (CAD/CAM)-generated bridges.

Methods: A total of 16 three- or four-unit Lava zirconia bridges were done on 15 subjects. The bridges were cemented using RelyX™ Unicem Self-Adhesive Universal Resin Cement.

Soft-tissue alterations following exposure to tooth-whitening agents.

Background: Tooth-whitening agents are widely used, either as self-application products or under the supervision of a dentist. These products may be associated with transient gross morphologic changes in oral soft tissues. However, their potential effects on human keratinocytes and fibroblasts in a stratified squamous epithelium have yet to be elucidated.

Long-term use of 6.5% hydrogen peroxide bleaching strips on tetracycline stain: a clinical study.

Unlabelled: This study evaluated the clinical response following extended daily use of a trayless 6.5% hydrogen peroxide (H2O2) tooth bleaching gel in patients with tetracycline stains.

Materials And Methods: In this clinical trial, participants (N = 30) were assigned to a strip product following screening for tetracycline staining.