The Glass Transition Temperature of Heterogeneous Biopolymer Systems.

Biopolymers are abundant, renewable, and biodegradable resources. However, bio-based materials often require toughening additives, like (co)polymers or small plasticizing molecules. Plasticization is monitored via the glass transition temperature versus diluent content.

Interfacial Microcompartmentalization by Kinetic Control of Selective Interfacial Accumulation.

Reported here is a 2D, interfacial microcompartmentalization strategy governed by 3D phase separation. In aqueous polyethylene glycol (PEG) solutions doped with biotinylated polymers, the polymers spontaneously accumulate in the interfacial layer between the oil-surfactant-water interface and the adjacent polymer phase. In aqueous two-phase systems, these polymers first accumulated in the interfacial layer separating two polymer solutions and then selectively migrated to the oil-PEG interfacial layer.

The Effect of Magnetic Field on Catalytic Properties in Core-Shell Type Particles.

Magnetic field effects can provide a handle on steering chemical reactions and manipulating yields. The presence of a magnetic field can influence the energy levels of the active species by interacting with their spin states. Here we demonstrate the effect of a magnetic field on the electrocatalytic processes taking place on platinum-based nanoparticles in fuel cell conditions.

The effect of lattice strain on catalytic activity.

We report on the effect of lattice strain in three different types of core-shell electrocatalyst particles on their catalytic activity towards the oxygen reduction reaction. We decouple the changes in catalytic activity with respect to a geometrical and an energetic contribution, both of electronic origin.

Transport in Proton Exchange Membranes for Fuel Cell Applications-A Systematic Non-Equilibrium Approach.

We hypothesize that the properties of proton-exchange membranes for fuel cell applications cannot be described unambiguously unless interface effects are taken into account. In order to prove this, we first develop a thermodynamically consistent description of the transport properties in the membranes, both for a homogeneous membrane and for a homogeneous membrane with two surface layers in contact with the electrodes or holder material. For each subsystem, homogeneous membrane, and the two surface layers, we limit ourselves to four parameters as the system as a whole is considered to be isothermal.

Transient assembly of active materials fueled by a chemical reaction.

Fuel-driven self-assembly of actin filaments and microtubules is a key component of cellular organization. Continuous energy supply maintains these transient biomolecular assemblies far from thermodynamic equilibrium, unlike typical synthetic systems that spontaneously assemble at thermodynamic equilibrium. Here, we report the transient self-assembly of synthetic molecules into active materials, driven by the consumption of a chemical fuel.

Bicontinuous microemulsions for high yield, wet synthesis of ultrafine nanoparticles: a general approach.

The design of a synthesis strategy for metal nanoparticles by templating dense microemulsions is proposed. Particle size is controlled by surfactant size rather than by microemulsion composition. The strategy was demonstrated with various systems with different surfactant: cationic, anionic and non-ionic and of different sizes.

Impact of the imaginary part of the surface dilatational modulus on the splashing behavior of drops.

The relation between the complex surface dilatational modulus E of aqueous surfactant solutions and the splashing behavior of their drops on liquid surfaces was investigated. The surface dilatational modulus E of selected surfactant systems has been determined in the frequency range of 3 to 500 Hz by means of the oscillating bubble technique. According to the functional dependence of the phase ϕ of the complex modulus E(ω, c)exp[iϕ(ω, c)] at higher frequencies, adsorption layers can be classified as surface elastic or surface viscoelastic.

Bicontinuous microemulsions for high yield wet synthesis of ultrafine platinum nanoparticles: effect of precursors and kinetics.

We demonstrate that for high yield wet synthesis of monodispersed nanoparticles high surfactant content bicontinuous microemulsions offer an advantageous template as particle size is limited by the embedding matrix whereas particle aggregation is largely prohibited by its structure. We synthesized platinum nanoparticles varying the reaction rate, metal precursor and reducing agent type and concentration, and the composition of the microemulsion in water content and oil type. High yields of up to 0.

Optimal ionic strength for nonionically initiated polymerization.

Surfactant-free emulsion polymerization involving a nonionic, and hence uncharged initiator presents a new approach towards environmentally friendly procedures to synthesize latex particles. Under optimal solvent conditions, notably pH and ionic strength, the latex particles are stabilized by the natural development of ionic charge at the surface of the particles. We emphasize that the present process does not at all involve the addition of stabilizers such as surfactants or the creation of surface-active species from ionic initiators.

Direct visualization of "coagulative nucleation" in surfactant-free emulsion polymerization.

It is generally believed that surfactant-free emulsion polymerization involves four steps: initiation, nucleation into primary particles, coagulation into secondary particles, and growth. By high resolution SEM-imaging of the intermediate polymerization products, the evolution of the morphology of the polymer particles has been followed. This allowed us, to our best knowledge for the first time, to visualize "coagulative nucleation", which is the process where the primary nanoparticles aggregate into larger entities.

Responsive wormlike micelles from dynamic covalent surfactants.

Dynamic covalent chemistry is a powerful tool for the construction of adaptive and stimulus-responsive nanosystems. Here we report on the spontaneous formation of dynamic covalent wormlike micelles from imine-based gemini surfactants, formed upon mixing aqueous solutions of two complementary non-surface-active precursors. Resulting from the reversibility of the dynamic covalent imine bond, the wormlike micelles can be switched between an isotropic solution and the assembled state, triggered by pH and temperature.

Slow growth of the Rayleigh-Plateau instability in aqueous two phase systems.

This paper studies the Rayleigh-Plateau instability for co-flowing immiscible aqueous polymer solutions in a microfluidic channel. Careful vibration-free experiments with controlled actuation of the flow allowed direct measurement of the growth rate of this instability. Experiments for the well-known aqueous two phase system (ATPS, or aqueous biphasic systems) of dextran and polyethylene glycol solutions exhibited a growth rate of 1 s(-1), which was more than an order of magnitude slower than an analogous experiment with two immiscible Newtonian fluids with viscosities and interfacial tension that closely matched the ATPS experiment.

Resolution of microscopic protonation enthalpies of polyprotic molecules by means of cluster expansions.

Cluster expansion techniques are used to obtain microconstants and microenthalpies of protonation reactions. The approach relies on the analysis of macroscopic protonation constants and protonation enthalpies within a homologous series. Various linear aliphatic polyamines are considered, including 3,4-tri (spermidine), 3,4,3-tet (spermine), and 2,2,2,2-pent.

Uniform metal nanoparticles produced at high yield in dense microemulsions.

This article demonstrates that bicontinuous microemulsions are optimal templates for high yield production of metal nanoparticles. We have verified this for a variety of microemulsion systems having AOT (sodium bis (2-ethyhexyl) sulphosuccinate) or a fluorocarbon (perfluoro (4-methyl-3,6-dioxaoctane)sulphonate) as surfactant mixed with water and oils like n-heptane or n-dodecane. Several types of metal nanoparticles, including platinum, gold and iron, were produced in these microemulsions having a size range spanning 1.

Micellization behavior of aromatic moiety bearing hybrid fluorocarbon sulfonate surfactants.

Aggregation behavior and thermodynamic properties of two novel homologous aromatic moiety bearing hybrid fluorocarbon surfactants, sodium 2-(2-(4-ethylphenyl)-1,1,2,2-tetrafluoroethoxy)-1,1,2,2-tetrafluoroethanesulfonate (1) and sodium 2-(1,1,2,2-tetrafluoro-2-(4-vinylphenyl)ethoxy)-1,1,2,2-tetrafluoroethanesulfonate (2) were studied using surface tension measurements and isothermal titration calorimetry (ITC) in dilute aqueous solutions at room temperature. Because of the aromatic group in the hydrophobic tail, both surfactants are soluble at room temperature unlike their starting precursor, 5-iodooctafluoro-3-oxapentanesulfonate as well as several other fluorocarbon sulfonic acid salts. Moreover, the surfactant 2 has the ability that it can be polymerized once microemulsions are formed with it.

Synthesis of magnetic noble metal (nano)particles.

Noble metal particles can be made strongly ferromagnetic or diamagnetic provided that they are synthesized in a sufficiently strong magnetic field. Here we outline two synthesis methods that are fast, reproducible, and allow broad control over particle sizes ranging from nanometers to millimeters. From magnetometry and light spectroscopy, it appears that the cause of this anomalous magnetism is the surface anisotropy in the noble metal particles induced by the applied magnetic field.

Monodisperse hydrogel microspheres by forced droplet formation in aqueous two-phase systems.

This paper presents a method to form micron-sized droplets in an aqueous two-phase system (ATPS) and to subsequently polymerize the droplets to produce hydrogel beads. Owing to the low interfacial tension in ATPS, droplets do not easily form spontaneously. We enforce the formation of drops by perturbing an otherwise stable jet that forms at the junction where the two aqueous streams meet.

Quantitatively interpreting thermal behavior of self-associating systems.

A general method is presented to extract thermodynamic as well as structural information from calorimetric data on self-associating systems using existing statistical thermodynamic models. The method is illustrated with one simple and one complex ligand binding system taken from the literature. The method is also used to extract the aggregation number using a simple mass balance model for self-assembly of surfactant molecules, and experimental evidence is provided to support this.

Triggered self-assembly of simple dynamic covalent surfactants.

A prototype surfactant system was developed with the unique feature that it can be switched between an aggregated, amphiphilic state and a nonaggregated, nonamphiphilic state using external stimuli. This switchable surfactant system uses the reversible formation of a dynamic covalent bond for pH- and temperature-triggered on/off self-assembly of micellar aggregates by reversible displacement of the equilibrium between nonamphiphilic building blocks and their amphiphilic counterparts. The potential for application in controlled-release systems is shown by reversible uptake and release of an organic dye in aqueous media.

Adsorption of poly(amido amine) (PAMAM) dendrimers on silica: importance of electrostatic three-body attraction.

Adsorption of poly(amido amine) (PAMAM) dendrimers to silicon oxide surfaces was studied as a function of pH, ionic strength, and dendrimer generation. By combining optical reflectometry and atomic force microscopy (AFM), the adsorbed layers can be fully characterized and an unequivocal determination of the adsorbed mass becomes possible. For early stages, the adsorption process is transport limited and of first order with respect to the dendrimer solution concentration.

Nonequilibrium thermodynamics--A tool to describe heterogeneous catalysis.

In the study of multi-component mass transfer it is common to use the film model, in which all the resistance to mass transfer towards a catalytic surface is assumed to be localized in a diffusion layer in front of the surface. At the surface one furthermore assumes that the temperature and chemical potentials are continuous, while the coupling of a possible heat flux to the mass fluxes is assumed to be negligible. Both these assumptions are questionable.