Biodegradation of 4-nitrophenol in a two-phase system operating with polymers as the partitioning phase.

The present study has demonstrated the enhanced performance of a two-phase bioreactor, operating with polymers as a partitioning phase, as an alternative to both single phase biotreatment and to the use of an immiscible organic solvent partitioning phase, to deliver a toxic substrate (4-nitrophenol, or 4NP) to a microbial consortium in batch and repeated batch mode. Three commercial polymers were tested, Hytrel, Tone, and Elvax, and were shown to have superior properties related to the use of a consortium, including complete biocompatibility with the biomass and nonbiodegradability. Repeated kinetic tests performed with short reaction times demonstrated the accumulation of 4NP within the polymers in the range of 6-8 mg/g polymer, which reduced polymer performance in subsequent batch operations.

On the use, and reuse, of polymers for the treatment of hydrocarbon contaminated water via a solid-liquid partitioning bioreactor.

Aqueous environments contaminated with diesel components pose a threat to the native biota due to the intrinsically toxic nature of the many hydrocarbon compounds present. In the event of diesel being released into an aqueous environment it is imperative that the contaminant is recovered in a rapid manner to ensure the safety of aquatic organisms as well as to maintain desired water quality. The research presented in this study investigates the potential of polymeric sorbents to recover diesel from a contaminated aqueous source.

Remediation of PAH contaminated soils: application of a solid-liquid two-phase partitioning bioreactor.

The feasibility of a two-step treatment process has been assessed at laboratory scale for the remediation of soil contaminated with a model mixture of polycyclic aromatic hydrocarbons (PAHs) (phenanthrene, pyrene, and fluoranthene). The initial step of the process involved contacting contaminated soil with thermoplastic, polymeric pellets (polyurethane). The ability of three different mobilizing agents (water, surfactant (Biosolve) and isopropyl alcohol) to enhance recovery of PAHs from soil was investigated and the results were compared to the recovery of PAHs from dry soil.

A novel solid-liquid two-phase partitioning bioreactor for the enhanced bioproduction of 3-methylcatechol.

The bioproduction of 3-methylcatechol from toluene via Pseudomonas putida MC2 was performed in a solid-liquid two-phase partitioning bioreactor with the intent of increasing yield and productivity over a single-phase system. The solid phase consisted of HYTREL, a thermoplastic polymer that was shown to possess superior affinity for the inhibitory 3-methylcatechol compared to other candidate polymers as well as a number of immiscible organic solvents. Operation of a solid-liquid biotransformation utilizing a 10% (w/w) solid (polymer beads) to liquid phase ratio resulted in the bioproduction of 3-methylcatechol at a rate of 350 mg/L-h, which compares favorably to the single phase productivity of 128 mg/L-h.

Solvent selection for enhanced bioproduction of 3-methylcatechol in a two-phase partitioning bioreactor.

The biotransformation of toluene to 3-methycatechol (3MC) via Pseudomonas putida MC2 was used as a model system for the development of a biphasic process offering enhanced overall volumetric productivity. Three factors were investigated for the identification of an appropriate organic solvent and they included solvent toxicity, bioavailability of the solvent as well as solvent affinity for 3MC. The critical log P (log P(crit)) of the biocatalyst was found to be 3.

Ex situ bioremediation of phenol contaminated soil using polymer beads.

Polymer beads have been used to absorb high concentrations of phenol from soil decreasing the initial concentration of 2.3 g kg(-1) soil to 100 mg kg(-1) soil and achieving a phenol loading within the polymer beads of 27.5 mg phenol g(-1) beads.

Biodegradation of a phenolic mixture in a solid-liquid two-phase partitioning bioreactor.

A solid-liquid two-phase partitioning bioreactor (TPPB) in which the non-aqueous phase consisted of polymer (HYTREL) beads was used to degrade a model mixture of phenols [phenol, o-cresol, and 4-chlorophenol (4CP)] by a microbial consortium. In one set of experiments, high concentrations (850 mg l(-1) of each of the three substrates) were reduced to sub-inhibitory levels within 45 min by the addition of the polymer beads, followed by inoculation and rapid (8 h) consumption of the total phenolics loading. In a second set of experiments, the beneficial effect of using polymer beads to launch a fermentation inhibited by high substrate concentrations was demonstrated by adding 1,300 and 2,000 mg l(-1) total substrates (equal concentrations of each phenolic) to a pre-inoculated bioreactor.

Enhanced biodegradation of phenol by a microbial consortium in a solid-liquid two phase partitioning bioreactor.

Two phase partitioning bioreactors (TPPBs) operate by partitioning toxic substrates to or from an aqueous, cell-containing phase by means of second immiscible phase. Uptake of toxic substrates by the second phase effectively reduces their concentration within the aqueous phase to sub-inhibitory levels, and transfer of molecules between the phases to maintain equilibrium results in the continual feeding of substrate based on the metabolic demand of the microorganisms. Conventionally, a single pure species of microorganism, and a pure organic solvent, have been used in TPPBs.

Polymer development for enhanced delivery of phenol in a solid-liquid two-phase partitioning bioreactor.

Two-Phase Partitioning Bioreactors (TPPBs) have traditionally been used to partition toxic concentrations of xenobiotics from a cell-containing aqueous phase by means of an immiscible organic solvent and to deliver these substrates back to the cells on the basis of metabolic demand and the maintenance of thermodynamic equilibrium between the phases. A limitation of TPPBs, which use organic liquid solvents, is the possibility that the solvent can be bioavailable, and this has therefore limited organic liquid TPPBs to the use of pure strains of microbes. Solid polymer beads have recently been introduced as a replacement for liquid organic solvents, offering similar absorption properties but with the capability to be used with mixed microbial populations.