Thermodynamic, Kinetic, Structural, and Computational Studies of the PhSn-H, PhSn-SnPh, and PhSn-Cr(CO)CMe Bond Dissociation Enthalpies.

The kinetics of the reaction of PhSnH with excess •Cr(CO)CMe = •Cr, producing HCr and PhSn-Cr, was studied in toluene solution under 2-3 atm CO pressure in the temperature range of 17-43.5 °C. It was found to obey the rate equation d[PhSn-Cr]/dt = k[PhSnH][•Cr] and exhibit a normal kinetic isotope effect (k/k = 1.

Synthesis of [Pt(SnBu(t)3)(IBu(t))(μ-H)]2, a Coordinatively Unsaturated Dinuclear Compound which Fragments upon Addition of Small Molecules to Form Mononuclear Pt-Sn Complexes.

The reaction of Pt(COD)2 with one equivalent of tri-tert-butylstannane, Bu(t)3SnH, at room temperature yields Pt(SnBu(t)3)(COD)(H)(3) in quantitative yield. In the presence of excess Bu(t)3SnH, the reaction goes further, yielding the dinuclear bridging stannylene complex [Pt(SnBu(t)3)(μ-SnBu(t)2)(H)2]2 (4). The dinuclear complex 4 reacts rapidly and reversibly with CO to furnish [Pt(SnBu(t)3)(μ-SnBu(t)2)(CO)(H)2]2 (5).

Partial oxidation of light alkanes by periodate and chloride salts.

The efficient and selective partial oxidation of light alkanes using potassium periodate and potassium chloride is reported. Yields of methane functionalization in trifluoroacetic acid reach >40% with high selectivity for methyl trifluoroacetate. Periodate and chloride also functionalize ethane and propane in good yields (>20%).

Selective monooxidation of light alkanes using chloride and iodate.

We describe an efficient system for the direct partial oxidation of methane, ethane, and propane using iodate salts with catalytic amounts of chloride in protic solvents. In HTFA (TFA = trifluoroacetate), >20% methane conversion with >85% selectivity for MeTFA have been achieved. The addition of substoichiometric amounts of chloride is essential, and for methane the conversion increases from <1% in the absence of chloride to >20%.

Thermodynamic, kinetic, and mechanistic study of oxygen atom transfer from mesityl nitrile oxide to phosphines and to a terminal metal phosphido complex.

The enthalpies of oxygen atom transfer (OAT) from mesityl nitrile oxide (MesCNO) to Me(3)P, Cy(3)P, Ph(3)P, and the complex (Ar[(t)Bu]N)(3)MoP (Ar = 3,5-C(6)H(3)Me(2)) have been measured by solution calorimetry yielding the following P-O bond dissociation enthalpy estimates in toluene solution (±3 kcal mol(-1)): Me(3)PO [138.5], Cy(3)PO [137.6], Ph(3)PO [132.

Well-defined [Rh(NHC)(OH)] complexes enabling the conjugate addition of arylboronic acids to α,β-unsaturated ketones.

The synthesis and catalytic activity of three well-defined monomeric rhodium(I) hydroxide complexes bearing N-heterocyclic carbene (NHC) ligands are reported. [Rh(cod)(ICy)(OH)] promoted the 1,4-addition of arylboronic acids to cyclic enones, with TONs and TOFs of 100,000 and 6,600 h(-1), respectively, at 0.001 mol% catalyst loadings.

Catalytic deuteration of silanes mediated by N-heterocyclic carbene-Ir(III) complexes.

The catalytic activity of a series of coordinatively unsaturated NHC-M(III) (M = Rh, Ir; NHC = N-heterocyclic carbene) complexes was tested in the deuteration of secondary and tertiary silanes. Among these, [IrCl(I(t)Bu')(2)] provides the highest conversions to the deuterated species. Mechanistic studies highlight the reversible nature of the ortho-metalation reaction.

N-Heterocyclic carbene (NHC) ligands and palladium in homogeneous cross-coupling catalysis: a perfect union.

Cross-coupling reactions using Pd-NHC (NHC = N-heterocyclic carbene) catalysts are discussed in this critical review and examined in terms of catalytic activity and how these have permitted advances in the area as they developed (95 references).

Oxygen binding to [Pd(L)(L')] (L= NHC, L' = NHC or PR3, NHC = N-heterocyclic carbene). synthesis and structure of a paramagnetic trans-[Pd(NHC)2(η(1)-O2)2] complex.

The reactivity of a number of two-coordinate [Pd(L)(L')] (L = N-heterocyclic carbene (NHC) and L' = NHC or PR(3)) complexes with O(2) has been examined. Stopped-flow kinetic studies show that O(2) binding to [Pd(IPr)(P(p-tolyl)(3))] to form cis-[Pd(IPr)(P(p-tolyl)(3))(η(2)-O(2))] occurs in a rapid, second-order process. The enthalpy of O(2) binding to the Pd(0) center has been determined by solution calorimetry to be -26.

A versatile gold synthon for acetylene C-H bond activation.

The reaction of N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene gold hydroxide ([Au(OH)(IPr)]; 1) with acetylene and trimethylsilylacetylene derivatives cleanly leads to the formation of a gold-acetylide bond with the concomitant formation of water or trimethylsilanol. All compounds were isolated in high yield (>85%). The crystal structures of selected gold acetylides in conjunction with their UV-vis absorption/emission properties were investigated.

Flexible cycloalkyl-substituted N-heterocyclic carbenes.

The use of two metal systems cis-Pt(NHC)(2)Me(2) and cis-Ir(NHC)(CO)(2)Cl help to highlight the flexibility of a series of cycloalkyl-substituted N-heterocyclic carbene ligands (ICy, ICy(7), ICy(8), ICy(12)). Bond dissociation enthalpies of several N-heterocyclic carbenes (NHCs) in cis-Pt(NHC)(2)Me(2) are estimated. Electronic and steric parameters of the ICy(n) ligands are quantified and discussed.

Unusual reactivities of N-heterocyclic carbenes upon coordination to the platinum(II)-dimethyl moiety.

Unsaturated NHCs of varying steric bulk undergo a series of unusual oxidative addition and reductive elimination processes upon binding to the Pt(Me)(2) fragment.

Experimental and computational studies of binding of dinitrogen, nitriles, azides, diazoalkanes, pyridine, and pyrazines to M(PR(3))(2)(CO)(3) (M = Mo, W; R = Me, (i)Pr).

The enthalpies of binding of a number of N-donor ligands to the complex Mo(P(i)Pr(3))(2)(CO)(3) in toluene have been determined by solution calorimetry and equilibrium measurements. The measured binding enthalpies span a range of approximately 10 kcal mol(-1): DeltaH(binding) = -8.8 +/- 1.

Thermodynamic investigations of the staudinger reaction of trialkylphosphines with 1-adamantyl azide and the isolation of an unusual s-cis phosphazide.

The reaction of PR(3) (R = Cy, (i)Pr) with 1-adamantyl azide (N(3)Ad) in benzene results in an equilibrium of the starting material and the phosphazide R(3)PN(3)Ad. Thermodynamic and kinetic measurements were taken of the reaction of P(i)Pr(3) with N(3)Ad and yielded DeltaH = -18.7 +/- 1.

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3.

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported.

Thermodynamic, kinetic, and computational study of heavier chalcogen (S, Se, and Te) terminal multiple bonds to molybdenum, carbon, and phosphorus.

Enthalpies of chalcogen atom transfer to Mo(N[t-Bu]Ar)3, where Ar = 3,5-C6H3Me2, and to IPr (defined as bis-(2,6-isopropylphenyl)imidazol-2-ylidene) have been measured by solution calorimetry leading to bond energy estimates (kcal/mol) for EMo(N[t-Bu]Ar)3 (E = S, 115; Se, 87; Te, 64) and EIPr (E = S, 102; Se, 77; Te, 53). The enthalpy of S-atom transfer to PMo(N[ t-Bu]Ar) 3 generating SPMo(N[t-Bu]Ar)3 has been measured, yielding a value of only 78 kcal/mol. The kinetics of combination of Mo(N[t-Bu]Ar)3 with SMo(N[t-Bu]Ar)3 yielding (mu-S)[Mo(N[t-Bu]Ar)3]2 have been studied, and yield activation parameters Delta H (double dagger) = 4.

Spectroscopic detection and theoretical confirmation of the role of Cr2(CO)5(C5R5)2 and .Cr(CO)2(ketene)(C5R5) as intermediates in carbonylation of N=N=CHSiMe3 to O=C=CHSiMe3 by .Cr(CO)3(C5R5) (R = H, CH3).

Conversion of N=N=CHSiMe3 to O=C=CHSiMe3 by the radical complexes .Cr(CO)3C5R5 (R = H, CH3) derived from dissociation of [Cr(CO)3(C5R5)]2 have been investigated under CO, Ar, and N2 atmospheres. Under an Ar or N2 atmosphere the reaction is stoichiometric and produces the Cr[triple bond]Cr triply bonded complex [Cr(CO)2(C5R5)]2.

Synthesis, structure, and thermochemistry of the formation of the metal-metal bonded dimers [Mo(mu-TeAr)(CO)3(PiP3)]2 (Ar = phenyl, naphthyl) by phosphine elimination from *Mo(TePh)(CO)3(PiPr3)2.

The complexes (*TeAr)Mo(CO)3(PiPr3)2 (Ar = phenyl, naphthyl; iPr = isopropyl) slowly eliminate PiPr3 at room temperature in a toluene solution to quantitatively form the dinuclear complexes [Mo(mu-TeAr)(CO)3(PiPr3)]2. The crystal structure of [Mo(mu-Te-naphthyl)(CO)3(PiPr3)]2 is reported and has a Mo-Mo distance of 3.2130 A.