Outcomes and Complications of Failed Anatomic Shoulder Arthroplasty Revised with Reverse Arthroplasty: A Systematic Review.

Background: Reverse shoulder arthroplasty (RSA) is an increasingly utilized option to address complications following anatomic total shoulder arthroplasty (TSA). This systematic review aims to identify the patient outcomes, complication rates, and re-revision rates following revision to a reverse shoulder replacement from a failed anatomic total shoulder arthroplasty.

Methods: MEDLINE, EMBASE, and CENTRAL were searched from inception until November 21, 2023 to identify studies reporting outcomes and/or complications for patients with a failed TSA revised to an RSA.

An in vitro study of glenoid implant peripheral peg interface mechanics during eccentric loading and lift-off.

Glenoid implants used in anatomic total shoulder arthroplasties typically incorporate peripheral pegs as a design feature to support eccentric loads. These peripheral pegs and the implant-cement-bone interface undergo substantial cyclic tensile-compressive loads during normal activity. Therefore, these pegs are of interest in translating the micromechanics of local implant fixation failure to the biomechanics of gross anatomic failure of the glenoid implant after total shoulder arthroplasty.

Superior capsular reconstruction using the long head of biceps tendon: a biomechanical assessment of tenodesis location and angle of fixation.

Background: Massive irreparable rotator cuff tears (MIRCTs) treated with superior capsular reconstruction (SCR) using the long head of the biceps tendon have shown satisfactory early results. Different techniques and positions for biceps tenodesis have been described. This study aimed to evaluate the effect of tenodesis location and glenohumeral fixation angle for graft tensioning on the biomechanics of an SCR using a single-strand biceps technique.

Stemless reverse shoulder arthroplasty neck shaft angle influences humeral component time-zero fixation and survivorship: a cadaveric biomechanical assessment.

Background: Stemless humeral components are being clinically investigated for reverse shoulder arthroplasty (RSA) procedures. There is, however, a paucity of basic science literature on the surgical parameters that influence the success of these procedures. Therefore, this cadaveric biomechanical study evaluated the neck shaft angle (NSA) of implantation on the survivability and performance of stemless RSA humeral components during cyclical loading.

An in vitro comparison of mixed-reality navigation to traditional freehand and patient-specific instrumentation techniques for glenoid guide pin insertion during shoulder arthroplasty.

Background: Accurate insertion of the glenoid guide pin in shoulder arthroplasty (RSA) is important for obtaining optimized glenoid component position and orientation. The objective of this study was to evaluate and compare the accuracy of 3 glenoid guide pin insertion techniques: (1) traditional software planning using freehand guide pin insertion (freehand), (2) guide pin insertion utilizing patient-specific instrumentation (PSI), and (3) using a mixed-reality navigation (MR-NAV) system.

Methods: Twenty (20) computed tomography (CT) scans were obtained from patients exhibiting glenoid erosion patterns according to the Walch and Favard classifications.

How to salvage the fractured coracoid during the Latarjet Procedure? An empirical approach.

The Latarjet procedure is a frequently used stabilization procedure in case of anterior shoulder instability with critical glenoid bone loss and/or off-track Hill Sachs lesions. Although uncommon, intra-operative graft fractures do occur. When confronted with this potentially challenging intra-operative complication, having a secondary solution is paramount to achieve a successful outcome.

A scapular statistical shape model can reliably predict premorbid glenoid morphology in conditions of severe glenoid bone loss.

Background: Knowledge of premorbid glenoid parameters at the time of shoulder arthroplasty, such as inclination, version, joint line position, height, and width, can assist with implant selection, implant positioning, metal augment sizing, and/or bone graft dimensions. The objective of this study was to validate a scapular statistical shape model (SSM) in predicting patient-specific glenoid morphology in scapulae with clinically relevant glenoid erosion patterns.

Methods: Computed tomography scans of 30 healthy scapulae were obtained and used as the control group.

The Kouvalchouk procedure vs. distal tibial allograft for treatment of posterior shoulder instability: the deltoid "hammock" effect exists.

Background: In 1993, Kouvalchouk described an acromial bone block with a pedicled deltoid flap for the treatment of posterior shoulder instability. This procedure provides a "double blocking" effect in that the acromial autograft restores posterior glenoid bone loss and the deltoid flap functions as a muscular "hammock" resembling the sling effect of the conjoint in the Latarjet procedure. The primary aim of this study was to compare the Kouvalchouk procedure to distal tibial allograft (DTA) reconstruction for the management of posterior shoulder instability with associated bone loss, while the secondary aim was to evaluate the deltoid hammock effect.

Bridge plating is an effective adjunct treatment for complex elbow instability.

Background: Managing persistent elbow instability and chronic dislocations presents challenges despite traditional treatments. Supplementary methods like immobilization and various fixations, though common, can carry high complication rates. This study assesses the efficacy of bridge plating in treating complex elbow instability through a retrospective review of patients.

Strength after the arthroscopic Latarjet procedure: Are shoulder internal rotation, elbow flexion & supination strength decreased?

Background: The Latarjet procedure is an effective shoulder stabilizing surgery, however, the procedure results in an alteration of anatomy that may result in shoulder and elbow weakness. Thus, the purpose of this study was to assess post-operative shoulder and elbow strength after the Latarjet procedure. We hypothesized that shoulder and elbow strength are not affected after the procedure.

Scapular morphology variation affects reverse total shoulder arthroplasty biomechanics. A predictive simulation study using statistical and musculoskeletal shoulder models.

Reverse total shoulder arthroplasty (RTSA) accounts for over half of shoulder replacement surgeries. At present, the optimal position of RTSA components is unknown. Previous biomechanical studies have investigated the effect of construct placement to quantify mobility, stability and functionality postoperatively.

Validation of mixed-reality surgical navigation for glenoid axis pin placement in shoulder arthroplasty using a cadaveric model.

Background: Mixed reality may offer an alternative for computer-assisted navigation in shoulder arthroplasty. The purpose of this study was to determine the accuracy and precision of mixed-reality guidance for the placement of the glenoid axis pin in cadaver specimens. This step is essential for accurate glenoid placement in total shoulder arthroplasty.

Stemless reverse humeral component neck-shaft angle has an influence on initial fixation.

Background: Stemless anatomic humeral components are commonly used and are an accepted alternative to traditional stemmed implants in patients with good bone quality. Presently, little literature exists on the design and implantation parameters that influence primary time-zero fixation of stemless reverse humeral implants. Accordingly, this finite element analysis study assessed the surgical implantation variable of neck-shaft angle, and its effect on the primary time-zero fixation of reversed stemless humeral implants.

Statistical Shape and Bone Property Models of Clinical Populations as the Foundation for Biomechanical Surgical Planning: Application to Shoulder Arthroplasty.

This work developed, validated, and compared statistical shape, statistical intensity, and statistical shape and intensity models (SSMs, SIMs, SSIMs) of scapulae from a clinical population. SSMs efficiently describe bone shape variation while SIMs describe bone material property variation, and SSIM's combine description of both variables. This work establishes these models' efficacy and whether they can be used in surgical planning.

Mixed reality visualization in shoulder arthroplasty: is it better than traditional preoperative planning software?

Background: Preoperative traditional software planning (TSP) is a method used to assist surgeons with implant selection and glenoid guide-pin insertion in shoulder arthroplasty. Mixed-Reality (MR) is a new technology that uses digital holograms of the preoperative plan and guide-pin trajectory projected into the operative field. The purpose of this study was to compare TSP to MR in a simulated surgical environment involving insertion of guide-pins into models of severely deformed glenoids.

Position statement: management of rotator cuff tears in adults.

We sought to compare success and re-tear rates of surgically treated full-thickness tears of the rotator cuff in men and women older than 18 years of age to develop a guideline intended for orthopedic surgeons and other health care providers who assess, counsel and care for these patients. We searched Medline, Embase and Cochrane databases through to Apr. 20, 2021, and included all English-language randomized trials comparing single-row versus double-row fixation via arthroscopic approaches; latissimus dorsi transfer (LDT) versus partial rotator cuff repair, lower trapezius transfer (LTT), and superior capsular reconstruction (SCR); and early versus late arthroscopic rotator cuff repair for traumatic tears.

Balancing clinician and patient priorities for total shoulder replacement preoperative education programs.

Objective: To investigate patient and clinician preferences regarding a preoperative educational program for patients undergoing shoulder replacement surgery.

Methods: This study used a cross-sectional survey of patients awaiting shoulder replacement surgery and clinicians. The survey was comprised of 41 questions for patients and clinicians, regarding preferences for receiving information, content preferences and device preferences.

Evaluation and treatment of postoperative periprosthetic humeral fragility fractures.

Postoperative periprosthetic humeral shaft fractures represent a growing and difficult complication to treat given the aging patient population and associated bone loss. Determining the best treatment option is multifactorial, including patient characteristics, fracture pattern, remaining bone stock, and implant stability. Possible treatment options include nonoperative management with bracing or surgical intervention.

Indomethacin for heterotopic ossification prophylaxis following surgical treatment of elbow trauma: a randomized controlled trial.

Background: Heterotopic ossification is a frequent complication following surgical treatment of elbow trauma. The use of indomethacin to prevent heterotopic ossification is reported in the literature; however, its effectiveness is controversial. The purpose of this randomized, double-blind, placebo-controlled study was to determine whether indomethacin is effective in reducing the incidence and severity of heterotopic ossification after surgical management of elbow trauma.

Stress shielding following stemless anatomic total shoulder arthroplasty.

Background: Finite element analysis has suggested that stemless implants may theoretically decrease stress shielding. The purpose of this study was to assess the radiographic proximal humeral bone adaptations seen following stemless anatomic total shoulder arthroplasty.

Methods: A retrospective review of 152 prospectively followed stemless total shoulder arthroplasty utilizing a single implant design was performed.