Publications by authors named "Genin Gary Huang"

Congo red is toxic to humans and the environment and persists in the environment for long periods. Therefore, developing a rapid detection method for Congo red is crucial. In this study, iron oxide quantum dots (IOQDs) were synthesized and employed for dual-mode detection (colorimetric and smartphone-based) of Congo red in real samples.

View Article and Find Full Text PDF

This study developed a dual-readout system utilizing fluorescence and colorimetry based on iron oxide quantum dots (IO-QDs) for detecting tetracycline (TCy). IO-QDs were synthesized within 6 h using L-leucine as a surface modifier, achieving a more efficient route. Upon interaction with TCy, IO-QDs exhibited a significant decrease in fluorescence response and observable color changes, while fluorescence lifetime remained consistent regardless of TCy presence.

View Article and Find Full Text PDF

A series of β-thioketiminate copper(I) complex trimers [LCu] were synthesized by modifying the ligand framework with electron-withdrawing groups (F and Cl) or electron-donating groups (Pr and Me) at the -aryl ring as well as with CF groups on the chelating backbone. This ligand modification significantly impacts the enhancement of Cu⋯Cu short contacts, which can be rationalized by using steric and electronic factors of the chelated ligand. We observed that this intramolecular cuprophilicity among [LCu] complexes is primarily governed by the size of -aryl -substituents.

View Article and Find Full Text PDF

The utilization of fluorescent quantum dots (FL QDs) has gained significant traction in the realm of antibiotic detection, owing to their exceptional FL properties and versatility. Various types of QDs have been tailored to exhibit superior FL characteristics, employing diverse capping agents such as metals, surfactants, polymers, and biomass to protect and stabilize their surfaces. In their evolution, FL QDs have demonstrated both "turn-off" and "turn-on" mechanisms in response to the presence of analytes, offering promising avenues for biosensing applications.

View Article and Find Full Text PDF

The development of new nanocomposites has a significant impact on modern instrumentation and analytical methods for chemical analysis. Due to their unique properties, carbon dots (CDs) and silver nanoparticles (AgNPs), distinguished by their unique physical, electrochemical, and optical properties, have captivated significant attention. Thus, combining AgNPs and CDs may produce Ag/CDs nanocomposites with improved performances than the individual material.

View Article and Find Full Text PDF

A fluorescence probe based on iron oxide quantum dots (IO-QDs) was synthesized using the hydrothermal method for the determination of tetracycline (TCy) and ciprofloxacin (CPx) in aqueous solution. The IO-QDs were characterized using high-resolution transmission electron microscopy (HR-TEM), powder X-ray diffraction (P-XRD), vibrating sample magnetometry (VSM), and Fourier-transform infrared spectroscopy (FTIR). The as-prepared IO-QDs are fluorescent, stable, and with a fluorescence quantum yield (QY) of 9.

View Article and Find Full Text PDF

The fabrication of iron oxide quantum dots (IO-QDs) modified with glutamic acid (Glu) under controllable conditions is reported. The IO-QDs have been characterized by transmission electron microscopy, spectrofluorometry, powder X-ray diffraction, vibrating sample magnetometry, UV-Vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy. The IO-QDs exhibited good stability towards irradiation, temperature elevations, and ionic strength, and the quantum yield (QY) of IO-QDs was calculated to be 11.

View Article and Find Full Text PDF

In this study, new nitrogen-doped carbon dots (N-CDs) were prepared by utilizing rambutan seed waste and l-aspartic acid as dual precursors (carbon and nitrogen sources) through a hydrothermal treatment method. The N-CDs showed blue emission in solution under UV light irradiation. Their optical and physicochemical properties were examined UV-vis, TEM, FTIR spectroscopy, SEM, DSC, DTA, TGA, XRD, XPS, Raman spectroscopy, and zeta potential analyses.

View Article and Find Full Text PDF

In this work, a simple, easy and selective method for sensing lysine in an acidic medium was developed based on fluorescent iron oxide quantum dots (IO QDs). IO QDs using the hydrothermal method were prepared with different conditions (concentration of NPs, amount of citric acid, heating time, heating temperature, and total volume in the hydrothermal reactor) where iron oxide nanoparticles (IO NPs) were used as the starting materials. TEM, FTIR, UV-Vis Spectrometry, fluorescence spectrometry, Powder XRD, VSM were used to characterize the as-prepared IO QDs.

View Article and Find Full Text PDF

The laser ablation synthesis in solution (LASiS) method has been widely utilized due to its significant prospects in laser microprocessing of nanomaterials. In this study, the LASiS method with the addition of different surfactant charges (cationic CTAB, nonionic TX-100, and anionic SDS) was used to produce Au NPs. An Nd:YAG laser system at 532 nm excitation with some synthetic parameters, including different laser fluences, ablation times, and surfactant concentrations was performed.

View Article and Find Full Text PDF

The heterogeneous oxidation reaction of single aqueous ascorbic acid (AH2) aerosol particles with gas-phase ozone was investigated in this study utilizing aerosol optical tweezers with Raman spectroscopy. The measured liquid-phase bimolecular rate coefficients of the AH2 + O3 reaction exhibit a significant pH dependence, and the corresponding values at ionic strength 0.2 M are (3.

View Article and Find Full Text PDF

Carbon dots (CDs) are a new cluster of carbon atoms with particle size less than 10 nm. CDs also exhibit interesting fluorescence (FL) properties. CDs are attractive because of their fascinating characteristics including low toxicity, good water solubility, and tremendous biocompatibility.

View Article and Find Full Text PDF
Article Synopsis
  • The study developed nitrogen-doped carbon dots (NCDs) using an eco-friendly method from Averrhoa carambola fruit extract and L-arginine, with the resulting NCDs characterized by various spectroscopy techniques.
  • The AC-NCDs were about 6.67 nm in size and showed strong fluorescence, with maximum emission at 446 nm, and effectively quench fluorescence when interacting with methyl orange dye.
  • The quenching efficiency of the AC-NCDs was influenced by pH levels, with the optimal performance at pH 5, indicating potential applications in environmental protection and related fields.
View Article and Find Full Text PDF

Recently, synthesis, characterization, and application of carbon dots have received much attention. Natural products are the effectual carbon precursors to synthesize carbon dots with fascinating chemical and physical properties. In this study, the fluorescent sensor of carbon dots derived from cranberry beans without any functionalization and modification was developed.

View Article and Find Full Text PDF
Article Synopsis
  • The study develops a simple one-step method to create silver-doped magnetic nanoparticles, which can be easily collected post-catalysis.
  • These nanoparticles serve as effective nanocatalysts for reducing -nitroaniline under controlled conditions.
  • Adjustments in production conditions and factors like pH and temperature affect the efficiency of the catalysis, making these nanocatalysts highly adaptable and reusable for practical applications.
View Article and Find Full Text PDF
Article Synopsis
  • An evanescent wave infrared (IR) chemical sensor was created to specifically identify volatile amines that have heterocyclic or phenyl rings.
  • A rhenium-based metallacycle with a "molecular-trap" structure was synthesized to attract these amines through unique interactions, enhancing selectivity.
  • After optimizing the sensor, it demonstrated a quick response and outstanding detection performance for pyridine, with linear detection limits up to 10 mg/L and a sensitivity limit of around 5.7 μg/L, effectively distinguishing it from other volatile organic compounds.
View Article and Find Full Text PDF

Nanonized noble metal composites have been known for their excellent catalytic properties. However, the mechanism and intermediates formed on the surfaces of nanocatalysts during catalysis are speculated with mostly insufficient evidence. In this study, to obtain further understanding of the roles of noble metal nanocatalysts in a catalytic reaction, surface-enhanced Raman scattering (SERS) was used to monitor the surfaces of silver (Ag) nanocatalysts.

View Article and Find Full Text PDF
Article Synopsis
  • A one-step process was developed to create anisotropic gold nanoassemblies using evaporation-assisted nanoparticle assembly, resulting in closely spaced yet non-agglomerated nanoparticles.
  • Scanning electron microscopy confirmed their unique structure, and when crystal violet was added, a significant enhancement in surface-enhanced Raman scattering (SERS) was recorded, demonstrating the assembly's strong SERS activity.
  • The study explored polarization-dependent SERS and fluorescence, revealing that in-plane polarization along the long axis of the assembly yielded the highest enhancement for both signals, supported by detailed simulations to explain the phenomena.
View Article and Find Full Text PDF
Article Synopsis
  • Water-stable rhenium metallacycles were created and tested for their ability to selectively bond with volatile organic compounds (VOCs) using ATR-IR spectroscopy.
  • Their unique structure allows for improved sensitivity in detecting aromatic compounds, especially those with polar functional groups, by modifying the ATR sensing surface with these metallacycles.
  • The findings indicate strong interactions between the metallacycles and aromatic VOCs, demonstrating quick response times and high recovery rates, with detection limits as low as 30 μg/L.
View Article and Find Full Text PDF
Article Synopsis
  • The study explores how glutathione molecules attach to silver nanoparticles using surface-enhanced Raman scattering (SERS) and heat-based sensing techniques.
  • It evaluates the impact of various chemical environments on the orientation and configuration of these molecules on the silver surfaces.
  • By analyzing SERS signals from different functional groups of glutathione, the research identifies their affinity to the silver nanoparticles and reveals their adsorption orientations.
View Article and Find Full Text PDF
Article Synopsis
  • The study explores how the co-adsorption of the protein lysozyme and the electrolyte NO(3)(-) on Ag colloid affects SERS signal enhancement.
  • Key experimental factors examined include the concentrations of lysozyme and NO(3)(-) as well as the drying temperature, revealing that these conditions can influence adsorption behavior.
  • The findings suggest that the adsorption mechanism aligns with double-layer behavior at solid/liquid interfaces, and changes in protein structure can impact how these substances interact, regardless of the order in which they are added.
View Article and Find Full Text PDF

In this study, a new application method for SERS named "reversed reporting agent" method is proposed for selective detection of biomolecules with a thiol group. In this method reporting agents such as rhodamine 6G (R6G) are capped on surfaces of silver colloidal nanoparticles. Analytes having a thiol group will replace the positions of reporting agents due to the strong interactions between silver and the thiol group, and then the SERS intensity of the reporting agents will be reduced.

View Article and Find Full Text PDF

This paper reports the characteristics of surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF) using a unique SERS-active substrate comprised of a single layer and a double layer of two-dimensional (2D) gold nanostructure. Colloidal gold nanoparticles were immobilized on a glass substrate and a multi-purpose experimental setup was adopted to obtain surface plasmon resonance (SPR), SERS and SEF on a single platform. Inhomogeneous intensity distribution was observed in correlated images of SPR and SERS.

View Article and Find Full Text PDF
Article Synopsis
  • A new method called "heat-induced SERS sensing" is introduced for quickly detecting glutathione in water, utilizing surface-enhanced Raman scattering (SERS) technology.
  • The efficiency of this method improves significantly when silver colloids bound with glutathione are heated prior to measurement, and it works best with silver particles around 60 nm in size.
  • Under optimal conditions, glutathione detection can be completed in just 5 minutes, achieving a detection limit of approximately 50 nM, which is much lower than previous methods.
View Article and Find Full Text PDF
Article Synopsis
  • The study focuses on the role of localized surface plasmon resonance (LSPR) in enhancing surface-enhanced Raman scattering (SERS), emphasizing that the quality of SERS substrates significantly impacts signal reproducibility.
  • Researchers developed unique gold and silver nanoparticle-based SERS-active substrates, noting that their gold substrates were prepared without surfactants, unlike most existing options.
  • Findings reveal that different nanoparticle structures, like isolated aggregates and elongated chains, affect enhancement levels; specifically, elongated gold structures provided the highest Raman signal enhancements, while a novel approach was used for silver substrates tailored for protein detection.
View Article and Find Full Text PDF