High drug-loaded amorphous solid dispersions of a poor glass forming drug: The impact of polymer type and cooling rate on amorphous drug behaviour.

Enhancing the aqueous solubility via amorphization of crystalline poor glass-forming drugs represents a challenge, particularly when drug dosing is high. In such scenarios, there is often a need for high polymer loadings, leading to an increase in the dosage form mass and less patient acceptability. This work investigated the role that polymer type and after-melt cooling rate had upon the amorphicity of solid dispersions (SDs) containing high levels of naproxen and three commonly used polymeric excipients: Eudragit® EPO, Kollidon® VA64, and Soluplus®.

Spectroscopic and Thermal Characterisation of Interpenetrating Hydrogel Networks (IHNs) Based on Polymethacrylates and Pluronics, and Their Physicochemical Stability under Aqueous Conditions.

This study describes the physicochemical characterisation of interpenetrating hydrogel networks (IHNs) composed of either poly(hydroxyethylmethacrylate, p(HEMA)) or poly(methacrylic acid, p(MAA)), and Pluronic block copolymers (grades F127, P123 and L121). IHNs were prepared by mixing the acrylate monomer with Pluronic block copolymers followed by free radical polymerisation. p(HEMA)-Pluronic blends were immiscible, evident from a lack of interaction between the two components (Raman spectroscopy) and the presence of the glass transitions (differential scanning calorimetry, DSC) of the two components.

Hot Melt Extruded High-Dose Amorphous Solid Dispersions Containing Lumefantrine and Soluplus.

Over the last 15 years, a small number of paediatric artemisinin-based combination therapy products have been marketed. These included Riamet® and Coartem® dispersible tablets, a combination of artemether and lumefantrine, co-developed by the Medicines for Malaria Venture and Novartis. Disappointingly, patient compliance, requirement for high-fat meal, and sporadic drug dissolution behaviours following administration still result in considerable challenges for these products.

In Situ Eutectic Formation in a Polymeric Matrix via Hot-Melt Reactive Extrusion and the Use of Partial Least Squares Regression Modeling for Reaction Yield Determination.

There has been a significant volume of work investigating the design and synthesis of new crystalline multicomponent systems via examining complementary functional groups that can reliably interact through the formation of noncovalent bonds, such as hydrogen bonds (H-bonds). Crystalline multicomponent molecular adducts formed using this approach, such as cocrystals, salts, and eutectics, have emerged as drug product intermediates that can lead to effective drug property modifications. Recent advancement in the production for these multicomponent molecular adducts has moved from batch techniques that rely upon intensive solvent use to those that are solvent-free, continuous, and industry-ready, such as reactive extrusion.

Unravelling the interactions between small molecules and liposomal bilayers via molecular dynamics and thermodynamic modelling.

Lipid-based drug delivery systems hold immense promise in addressing critical medical needs, from cancer and neurodegenerative diseases to infectious diseases. By encapsulating active pharmaceutical ingredients - ranging from small molecule drugs to proteins and nucleic acids - these nanocarriers enhance treatment efficacy and safety. However, their commercial success faces hurdles, such as the lack of a systematic design approach and the issues related to scalability and reproducibility.

Kinetic and Thermodynamic Interplay of Polymer-Mediated Liquid-Liquid Phase Separation for Poorly Water-Soluble Drugs.

Understanding the interplay between kinetics and thermodynamics of polymer-mediated liquid-liquid phase separation is crucial for designing and implementing an amorphous solid dispersion formulation strategy for poorly water-soluble drugs. This work investigates the phase behaviors of a poorly water-soluble model drug, celecoxib (CXB), in a supersaturated aqueous solution with and without polymeric additives (PVP, PVPVA, HPMCAS, and HPMCP). Drug-polymer-water ternary phase diagrams were also constructed to estimate the thermodynamic behaviors of the mixtures at room temperature.

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems.

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the "deep eutectic" region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions.

Mucoadhesive Polymeric Polyologels Designed for the Treatment of Periodontal and Related Diseases of the Oral Cavity.

The study objective was to design and characterise herein unreported polyologels composed of a range of diol and triol solvents and polyvinyl methyl ether-co-maleic acid (PVM/MA) and, determine their potential suitability for the treatment of periodontal and related diseases in the oral cavity using suitable in vitro methodologies. Polyologel flow and viscoelastic properties were controlled by the choice of solvent and the concentration of polymer. At equivalent polymer concentrations, polyologels prepared with glycerol (a triol) exhibited the greatest elasticity and resistance to deformation.

Use of solid thermolytic salts to facilitate microwave-induced in situ amorphization.

Moisture was frequently used as dielectric heating source in classical microwave-able systems to facilitate microwave-induced in situ amorphization, however such systems may face the potential of drug hydrolysis. In this study, solid thermolytic salts were proposed to function as moisture substitutes and their feasibility and impacts on microwave-induced in situ amorphization were investigated. It was found that NHHCO was a promising solid alkaline salt to facilitate both microwave-induced in situ amorphization and in situ salt formation of acidic indomethacin (IND).

Therapeutic deep eutectic solvents: A comprehensive review of their thermodynamics, microstructure and drug delivery applications.

Deep eutectic solvents (DES) are multicomponent liquids that are usually formed by coupling a hydrogen bond donor and acceptor leading to strong non-covalent (NC) intermolecular networking and profound depression in the melting point of the system. Pharmaceutically, this phenomenon has been exploited to improve drugs' physicochemical properties, with an established DES therapeutic subcategory, therapeutic deep eutectic solvents (THEDES). THEDES preparation is usually via straightforward synthetic processes with little involvement of sophisticated techniques, which, in addition to its thermodynamic stability, make these multi-component molecular adducts a very attractive alternative for drug enabling purposes.

Photosensitiser-incorporated microparticles for photodynamic inactivation of bacteria.

Antimicrobial resistance is an ever-growing global concern, making the development of alternative antimicrobial agents and techniques an urgent priority to protect public health. Antimicrobial photodynamic therapy (aPDT) is one such promising alternative, which harnesses the cytotoxic action of reactive oxygen species (ROS) generated upon irradiation of photosensitisers (PSs) with visible light to destroy microorganisms. In this study we report a convenient and facile method to produce highly photoactive antimicrobial microparticles, exhibiting minimal PS leaching, and examine the effect of particle size on antimicrobial activity.

High drug loading nanosized amorphous solid dispersion (NASD) with enhanced in vitro solubility and permeability: Benchmarking conventional ASD.

Through liquid-liquid phase separation (LLPS), it is possible to generate drug-rich nanoparticles during the dissolution of conventional amorphous solid dispersions (ASDs). These self-generated nanoparticles may improve the oral absorption of poorly water-soluble drugs by enhancing the drug's apparent solubility and effective membrane permeability. However, due to the high concentration threshold required for LLPS, conventional ASDs that can consistently generate drug-rich nanoparticles during dissolution are rare.

A new mathematical model derived from transient (creep) analysis to estimate the vaginal retention of semi-solid dosage forms.

The performance of vaginal drug delivery systems is dependent on their retention. This study presents a novel mathematical method to estimate the vaginal retention of semi-solids. Using creep analysis, the elastic and residual compliances are determined from the discrete retardation spectrum and used to determine the retention times (RT), defined as the time required for the formulations to enter the terminal viscous zone of deformation and hence flow.

The effects of surfactants on the performance of polymer-based microwave-induced in situ amorphization.

Microwave-induced in situ amorphization is a novel technology for preparing amorphous solid dispersions (ASDs) to address the challenges of their long-term physical stability and downstream processing. To date, only few types of dielectric materials have been reported for microwave-induced in situ amorphization, which restricted the extensive research of this technology. This study aimed to investigate the feasibility and mechanisms of utilizing the non-ionic surfactants, i.

Design and scale-up of amorphous drug nanoparticles production via a one-step anhydrous continuous process.

Polymeric nanoparticle drug delivery systems are increasingly viewed as crucial building blocks for efficacious treatments of disease conditions. However, production methods at commercially practical scales pose a significant challenge for successfully translating such technology. This paper describes a novel, anhydrous, twin-screw extrusion (TSE) platform-based technology to overcome the issues associated with developing and scale-up production of nanoparticulate drug delivery systems.

Exploiting hydrogen bonding to enhance lidocaine loading and stability in a poly ethylene-co-vinyl acetate carrier matrix.

Sustained release of lidocaine from poly ethylene-co-vinyl acetate (EVA) implants can significantly improve pain management outcomes; however, poor drug loading is a major limitation. Recently, myristic acid was found to improve drug loading in EVA by inhibiting the crystallization of lidocaine. Here, lidocaine's interaction with myristic acid was studied by differential scanning calorimetry.

The Current States, Challenges, Ongoing Efforts, and Future Perspectives of Pharmaceutical Excipients in Pediatric Patients in Each Country and Region.

A major hurdle in pediatric formulation development is the lack of safety and toxicity data on some of the commonly used excipients. While the maximum oral safe dose for several kinds of excipients is known in the adult population, the doses in pediatric patients, including preterm neonates, are not established yet due to the lack of evidence-based data. This paper consists of four parts: (1) country-specific perspectives in different parts of the world (current state, challenges in excipients, and ongoing efforts) for ensuring the use of safe excipients, (2) comparing and contrasting the country-specific perspectives, (3) past and ongoing collaborative efforts, and (4) future perspectives on excipients for pediatric formulation.

The development and optimisation of gastro-retentive floating tablets using fused deposition modelling 3D printing.

Objectives: To develop a robust tablet design for the manufacture of gastro-retentive tablets using fused deposition modelling three-dimensional printing (FDM-3DP) that can provide prolonged gastric residence time with instant floating and minimum influence of process and/or formulation variables.

Methods: Three different polymers, such as polyvinyl alcohol (PVA), hydroxypropyl cellulose (HPC) and Soluplus were used, separately, for the manufacture of tablets using FDM-3DP. Tablets were designed in a sandwich model that included voids in the internal structure to support buoyancy.

3D printing of pharmaceutical oral solid dosage forms by fused deposition: The enhancement of printability using plasticised HPMCAS.

3D printing (3DP) by fused deposition modelling (FDM) is one of the most extensively developed methods in additive manufacturing. Optimizing printability by improving feedability, nozzle extrusion, and layer deposition is crucial for manufacturing solid oral dosage forms with desirable properties. This work aimed to use HPMCAS (Affinisol HPMCAS 716) to prepare filaments for FDM-3DP using hot-melt extrusion (HME).

Investigation into the role of the polymer in enhancing microwave-induced in situ amorphization.

Microwave-induced in situ amorphization is an emerging technology to tackle the persistent stability issue of amorphous solid dispersions (ASDs) during manufacture and storage. The aim of this study was to introduce new effective polymeric carriers with diverse properties to microwave-induced in situ amorphization and to better understand their functions in relation to the final dissolution performance of microwaved tablets. Tablets composed of indomethacin (IND) and different polymers were compacted, stored at 75% relative humidity for at least 1 week and microwaved at 1000 W to induce amorphization.

3D Printing: an appealing technology for the manufacturing of solid oral dosage forms.

Objectives: The traditional manufacturing methods of solid oral dosage forms (SODFs) are reported to be time-consuming, highly expensive and not tailored to the patient's needs. Three-dimensional printing (3DP) is an innovative emerging technology that can help to overcome these issues. The aim of this review is to describe the most employed 3DP technologies, materials and the state of the art on 3DP SODFs.

Drug-Rich Phases Induced by Amorphous Solid Dispersion: Arbitrary or Intentional Goal in Oral Drug Delivery?

Among many methods to mitigate the solubility limitations of drug compounds, amorphous solid dispersion (ASD) is considered to be one of the most promising strategies to enhance the dissolution and bioavailability of poorly water-soluble drugs. The enhancement of ASD in the oral absorption of drugs has been mainly attributed to the high apparent drug solubility during the dissolution. In the last decade, with the implementations of new knowledge and advanced analytical techniques, a drug-rich transient metastable phase was frequently highlighted within the supersaturation stage of the ASD dissolution.