Atomistic Investigation of Viscoelastic Nanofluids as Heat Transfer Liquids for Immersive-Cooling Applications.

A comparative assessment of the thermal properties and heat transfer coefficients achieved by viscoelastic nanofluids suitable for immersion cooling is presented, with the candidate samples exhibiting distinct differences based on the nanoparticle chemistry and shape. Molecular dynamics simulations of different nanoparticles such as copper nanosphere, two-dimensional pristine graphene, and single-walled carbon nanotube (CNT) dispersed in PAO-2 of concentrations of approximately equal to 2.6% by weight are performed in the present investigation.

Quantification of cavitating flows with neutron imaging.

The current experimental investigation demonstrates the capability of neutron imaging to quantify cavitation, in terms of vapour content, within an orifice of an abruptly constricting geometry. The morphology of different cavitation regimes setting in was properly visualised owing to the high spatial resolution of 16 μm achieved, given the extensive field of view of 12.9 × 12.

Investigation of the ultrasound-induced collapse of air bubbles near soft materials.

A numerical investigation into the ultrasound-induced collapse of air bubbles near soft materials, utilizing a novel multi-material diffuse interface method (DIM) model with block-structured adaptive mesh refinement is presented. The present work expands from a previous five-equation DIM by incorporating Eulerian hyperelasticity. The model is applicable to any arbitrary number of interacting fluid and solid material.

Prediction of shock heating during ultrasound-induced bubble collapse using real-fluid equations of state.

Numerical simulations of collapsing air bubbles considering complex and more accurate equations of state (EoS) for estimating the properties of both the liquid and gas are presented. The necessity for utilising such EoSs in bubble collapse simulations is illustrated by the unphysical (spurious) liquid temperature jump formed in the vicinity of the bubble-air interface when simplified EoSs are used. The solved fluid flow equations follow the mechanical equilibrium multiphase method of Kapila.

Numerical investigation of shock-induced bubble collapse dynamics and fluid-solid interactions during shock-wave lithotripsy.

In this paper we investigate the bubble collapse dynamics under shock-induced loading near soft and rigid bio-materials, during shock wave lithotripsy. A novel numerical framework was developed, that employs a Diffuse Interface Method (DIM) accounting for the interaction across fluid-solid-gas interfaces. For the resolution of the extended variety of length scales, due to the dynamic and fine interfacial structures, an Adaptive Mesh Refinement (AMR) framework for unstructured grids was incorporated.

Numerical study of real gas effects during bubble collapse using a disequilibrium multiphase model.

An explicit density-based solver of the Euler equations for inviscid and immiscible gas-liquid flow media is coupled with real-fluid thermodynamic equations of state supporting mild dissociation and calibrated with shock tube data up to 5000 K and 28 GPa. The present work expands the original 6-equation disequilibrium method by generalising the numerical approach required for estimating the equilibrium pressure in computational cells where both gas and liquid phases co-exist while enforcing energy conservation for all media. An iterative numerical procedure is suggested for taking into account the properties of the gas content as derived from highly non-linear real gas equations of state and implemented in a tabulated form during the numerical solution.

Droplet nuclei caustic formations in exhaled vortex rings.

Vortex ring (VR) structures occur in light or hoarse cough configurations. These instances consist of short impulses of exhaled air resulting to a self-contained structure that can travel large distances. The present study is the first implementation of the second order Fully Lagrangian Approach (FLA) for three-dimensional realistic flow-fields obtained by means of Computational Fluid Dynamics (CFD) and provides a method to calculate the occurrence and the intensity of caustic formations.

Bioinspired snapping-claw apparatus to study hydrodynamic cavitation effects on the corrosion of metallic samples.

A creative low-cost and compact mechanical device that mimics the rapid closure of the pistol shrimp claw was used to conduct electrochemical experiments, in order to study the effects of hydrodynamic cavitation on the corrosion of aluminum and steel samples. Current-time curves show significant changes associated with local variations in dissolved O concentration, cavitation-induced erosion, and changes in the nature of the surface corrosion products.

Influence of Diesel Fuel Viscosity on Cavitating Throttle Flow Simulations under Erosive Operation Conditions.

This work investigates the effect of liquid fuel viscosity, as specific by the European Committee for Standardization 2009 (European Norm) for all automotive fuels, on the predicted cavitating flow in micro-orifice flows. The wide range of viscosities allowed leads to a significant variation in orifice nominal Reynolds numbers for the same pressure drop across the orifice. This in turn, is found to affect flow detachment and the formation of large-scale vortices and microscale turbulence.

Numerical investigations on bubble-induced jetting and shock wave focusing: application on a needle-free injection.

The formation of a liquid jet into air induced by the growth of a laser-generated bubble inside a needle-free device is numerically investigated by employing the compressible Navier-Stokes equations. The three co-existing phases (liquid, vapour and air) are assumed to be in thermal equilibrium. A transport equation for the gas mass fraction is solved in order to simulate the non-condensable gas.

Illustrating the effect of viscoelastic additives on cavitation and turbulence with X-ray imaging.

The effect of viscoelastic additives on the topology and dynamics of the two-phase flow arising within an axisymmetric orifice with a flow path constriction along its main axis has been investigated employing high-flux synchrotron radiation. X-ray Phase Contrast Imaging (XPCI) has been conducted to visualise the cavitating flow of different types of diesel fuel within the orifice. An additised blend containing Quaternary Ammonium Salt (QAS) additives with a concentration of 500 ppm has been comparatively examined against a pure (base) diesel compound.

Smoothed particle hydrodynamics simulation of a laser pulse impact onto a liquid metal droplet.

The impact of a laser pulse onto a liquid metal droplet is numerically investigated by utilising a weakly compressible single phase model; the thermodynamic closure is achieved by the Tait equation of state (EoS) for the liquid metal. The smoothed particle hydrodynamics (SPH) method, which has been employed in the arbitrary Lagrangian Eulerian (ALE) framework, offers numerical efficiency, compared to grid related discretization methods. The latter would require modelling not only of the liquid metal phase, but also of the vacuum, which would necessitate special numerical schemes, suitable for high density ratios.

Modelling cavitation during drop impact on solid surfaces.

The impact of liquid droplets on solid surfaces at conditions inducing cavitation inside their volume has rarely been addressed in the literature. A review is conducted on relevant studies, aiming to highlight the differences from non-cavitating impact cases. Focus is placed on the numerical models suitable for the simulation of droplet impact at such conditions.

Turbulence and Cavitation Suppression by Quaternary Ammonium Salt Additives.

We identify the physical mechanism through which newly developed quaternary ammonium salt (QAS) deposit control additives (DCAs) affect the rheological properties of cavitating turbulent flows, resulting in an increase in the volumetric efficiency of clean injectors fuelled with diesel or biodiesel fuels. Quaternary ammonium surfactants with appropriate counterions can be very effective in reducing the turbulent drag in aqueous solutions, however, less is known about the effect of such surfactants in oil-based solvents or in cavitating flow conditions. Small-angle neutron scattering (SANS) investigations show that in traditional DCA fuel compositions only reverse spherical micelles form, whereas reverse cylindrical micelles are detected by blending the fuel with the QAS additive.

Parametric Investigations of the Induced Shear Stress by a Laser-Generated Bubble.

The present paper focuses on the simulation of the growth and collapse of a bubble in the vicinity of a wall. Both liquid and gas phases are assumed compressible, and their interaction is handled with the volume-of-fluid method. The main interest is to quantify the influence of the induced shear stress and pressure pulse in the vicinity of the wall for a variety of bubble sizes and bubble-wall distances.

Experimental Study of Diesel-Fuel Droplet Impact on a Similarly Sized Polished Spherical Heated Solid Particle.

The head-to-head impact of diesel-fuel droplets on a polished spherical brass target has been investigated experimentally. High-speed imaging was employed to visualize the impact process for wall surface temperatures and Weber and Reynolds numbers in the ranges of 140-340 °C, 30-850, and 210-1135, respectively. The thermohydrodynamic outcome regimes occurring for the aforementioned ranges of parameters were mapped on a We-T diagram.

Unveiling the physical mechanism behind pistol shrimp cavitation.

Snapping shrimps use a special shaped claw to generate a cavitating high speed water jet. Cavitation formed in this way, may be used for hunting/stunning prey and communication. The present work is a novel computational effort to provide insight on the mechanisms of cavitation formation during the claw closure.

Modelling of thrombin generation under flow in realistic left anterior descending geometries.

Currently there are no available methods for prediction of thrombotic complications in Coronary Artery disease. Additionally, blood coagulation tests are mainly performed in a steady system while coagulation in vivo occurs under flow conditions. In this work, a phenomenological model for coagulation up-to thrombin generation is proposed; the model is mainly based on the results of thrombin generation assays and therefore it can account for the variation of the coagulability that is observed in different individuals.

Novel experimental technique for 3D investigation of high-speed cavitating diesel fuel flows by X-ray micro computed tomography.

An experimental technique for the estimation of the temporal-averaged vapour volume fraction within high-speed cavitating flow orifices is presented. The scientific instrument is designed to employ X-ray micro computed tomography (microCT) as a quantitative 3D measuring technique applied to custom designed, large-scale, orifice-type flow channels made from Polyether-ether-ketone (PEEK). The attenuation of the ionising electromagnetic radiation by the fluid under examination depends on its local density; the transmitted radiation through the cavitation volume is compared to the incident radiation, and combination of radiographies from sufficient number of angles leads to the reconstruction of attenuation coefficients versus the spatial position.

VOF simulations of the contact angle dynamics during the drop spreading: standard models and a new wetting force model.

Introduction: In this study,a novel numerical implementation for the adhesion of liquid droplets impacting normally on solid dry surfaces is presented. The advantage of this new approach, compared to the majority of existing models, is that the dynamic contact angle forming during the surface wetting process is not inserted as a boundary condition, but is derived implicitly by the induced fluid flow characteristics (interface shape) and the adhesion physics of the gas-liquid-surface interface (triple line), starting only from the advancing and receding equilibrium contact angles. These angles are required in order to define the wetting properties of liquid phases when interacting with a solid surface.

A simplified mathematical model for thrombin generation.

A new phenomenological mathematical model based directly on laboratory data for thrombin generation and having a patient-specific character is described. A set of the solved equations for cell-based models of blood coagulation that can reproduce the temporal evolution of thrombin generation is proposed; such equations are appropriate for use in computational fluid dynamic (CFD) simulations. The initial values for the reaction rates are either taken from already existing model or experimental data, or they can obtained from simple reasoning under certain assumptions; it is shown that coefficients can be adjusted in order to fit a range of different thrombin generation curves as derived from thrombin generation assays.

Flow patterns at stented coronary bifurcations: computational fluid dynamics analysis.

Background: The ideal bifurcation stenting technique is not established, and data on the hemodynamic characteristics at stented bifurcations are limited.

Methods And Results: We used computational fluid dynamics analysis to assess hemodynamic parameters known affect the risk of restenosis and thrombosis at coronary bifurcations after the use of various single- and double-stenting techniques. We assessed the distributions and surface integrals of the time averaged wall shear stress (TAWSS), oscillatory shear index (OSI), and relative residence time (t(r)).

Vortex formation and recirculation zones in left anterior descending artery stenoses: computational fluid dynamics analysis.

Flow patterns may affect the potential of thrombus formation following plaque rupture. Computational fluid dynamics (CFD) were employed to assess hemodynamic conditions, and particularly flow recirculation and vortex formation in reconstructed arterial models associated with ST-elevation myocardial infraction (STEMI) or stable coronary stenosis (SCS) in the left anterior descending coronary artery (LAD). Results indicate that in the arterial models associated with STEMI, a 50% diameter stenosis immediately before or after a bifurcation creates a recirculation zone and vortex formation at the orifice of the bifurcation branch, for most of the cardiac cycle, thus allowing the creation of stagnating flow.

Simulation of cardiac motion on non-Newtonian, pulsating flow development in the human left anterior descending coronary artery.

This study aimed at investigating the effect of myocardial motion on pulsating blood flow distribution of the left anterior descending coronary artery in the presence of atheromatous stenosis. The moving 3D arterial tree geometry has been obtained from conventional x-ray angiograms obtained during the heart cycle and includes a number of major branches. The geometry reconstruction model has been validated against projection data from a virtual phantom arterial tree as well as with CT-based reconstruction data for the same patient investigated.