Towards a real-time release of blends and tablets using NIR and Raman spectroscopy at commercial scales.

Near Infrared and Raman spectroscopy-based Process Analytical Technology tools were used for monitoring blend uniformity (BU) and content uniformity (CU) for solid oral formulations. A quantitative Partial Least Square model was developed to monitor BU as real-time release testing at a commercial scale. The model having the , and root mean square error of 0.

Development of Inline Near-Infrared Spectroscopy Method for Real-Time Monitoring of Blend Uniformity of Direct Compression and Granulation-Based Products at Commercial Scales.

Blending is a critical intermediate unit operation for all solid oral formulations. For blend uniformity testing, API content in the blend must be quantified precisely. A detailed study was conducted to demonstrate the suitability of inline NIR (near-infrared) spectroscopy for blend uniformity testing of two solid oral formulations: existing direct compression (DC) product with a multistep blending process and granulation-based product with API granules.

Optimization of a liquid chromatography method for the analysis of related substances in daclatasvir tablets using design of experiments integrated with the steepest ascent method and Monte Carlo simulation.

Analytical method for the determination of related substances (RS) in Daclatasvir tablets was optimised using quality by design (QbD) approach. Seven degradants (each more than 1.0%) generated during oxidation study, adversely affected the selectivity of the method.

Application of Quality by Design: Development to Manufacturing of Diclofenac Sodium Topical Gel.

The objective of the present study was to develop and optimize generic topical gel formulation of diclofenac sodium through quality by design approaches. The quality target product profile was set for the critical quality attributes of the gel. The key material variables like hydrophilic gelling agent carbopol and penetration enhancer kolliphor were optimized using design of experiments.

Fate of over 480 million inhabitants living in arsenic and fluoride endemic Indian districts: Magnitude, health, socio-economic effects and mitigation approaches.

During our last 27 years of field survey in India, we have studied the magnitude of groundwater arsenic and fluoride contamination and its resulting health effects from numerous states. India is the worst groundwater fluoride and arsenic affected country in the world. Fluoride results the most prevalent groundwater related diseases in India.

A simultaneous determination of related substances by high performance liquid chromatography in a drug product using quality by design approach.

The combination of Abacavir, Lamivudine and Dolutegravir is an anti-retroviral formulation that displays high efficacy and superiority in comparison to other anti-retroviral combinations. Analysis of related substances in this combination drug product was very challenging due to the presence of nearly thirty peaks including the three active pharmaceutical ingredients (APIs), eleven known impurities and other pharmaceutical excipients. Objective of this study was to develop a single, selective, and robust high performance liquid chromatography method for the efficient separation of all peaks.

Comparative study of arsenic removal by iron using electrocoagulation and chemical coagulation.

This research studied As(III) and As(V) removal during electrocoagulation (EC) in comparison with FeCl(3) chemical coagulation (CC). The study also attempted to verify chlorine production and the reported oxidation of As(III) during EC. Results showed that As(V) removal during batch EC was erratic at pH 6.

Ferrous and ferric ion generation during iron electrocoagulation.

Our research on arsenate removal by iron electrocoagulation (EC) produced highly variable results, which appeared to be due to Fe2+ generation without subsequent oxidation to Fe3+. Because the environmental technology literature is contradictory with regard to the generation of ferric or ferrous ions during EC, the objective of this research was to establish the iron species generated during EC with iron anodes. Experimental results demonstrated that Fe2+, not Fe3+, was produced at the iron anode.

Arsenic in the breast milk of lactating women in arsenic-affected areas of West Bengal, India and its effect on infants.

Two hundred and twenty-six breast milk samples were collected from lactating women from 3 blocks of North-24 Paragans, one of the arsenic-affected districts of West Bengal, India. Out of 226 samples, only in 39 samples arsenic was detected. Urine, hair, and nail samples were also analyzed to know the arsenic body burden of the lactating women.

Influence of sulfide (S2-) on preservation and speciation of inorganic arsenic in drinking water.

Generally, H2SO4, HNO3, HCl or the combination of ethylenediaminetetraacetate with acetic acid (EDTA-HAc) have been used to preserve arsenite and arsenate species prior to analysis. When these acidic preservatives are added in sulfidic water, instantaneous precipitation of poorly crystalline orpiment, As2S3(am), occurs, thereby lowering the total arsenic, As(Tot), analysis. A new method for the determination of As(Tot) was developed in which acid-preserved sulfidic water samples were oxidized with NaOCl, converting As2S3(am) and thioarsenic species to arsenate.

Preservation of inorganic arsenic species in groundwater.

The objective of this research was to develop a robust preservation method for stabilizing inorganic As(IlI/V) species in synthetic and actual groundwaters. Ethylenediaminetetraacetic acid (EDTA), H2SO4, H3PO4, and EDTA-acetic acid (HAc) were evaluated in synthetic groundwater containing 3 mg/L Fe(ll) in the pH range 6.5-8.

Arsenic and other elements in hair, nails, and skin-scales of arsenic victims in West Bengal, India.

For the first time, biological tissues (hair, nails, and skin-scales) of arsenic victims from an arsenic affected area of West Bengal (WB), India were analyzed for trace elements. Analysis was carried out by inductively coupled plasma-mass spectrometry (ICP-MS) for 10 elements (As, Se, Hg, Zn, Pb, Ni, Cd, Mn, Cu, and Fe). A microwave digester was used for digestion of the tissue samples.

A continuous analyzer for soluble anionic constituents and ammonium in atmospheric particulate matter.

A new continuous soluble particle collector (PC) that does not use steam is described. Preceded by a denuder and interfaced with an ion chromatograph, this compact collector (3 in. o.

An automated sequential injection analysis system for the determination of trace endotoxin levels in water.

A new automated instrument based on the Limulus amebocyte lysate (LAL)-chromogenic substrate kinetic assay for the determination of bacterial endotoxins is reported. A computer controlled syringe pump-multiport valve combination was used to aspirate the sample and other reagents into a holding coil. The syringe was always filled with air; liquid did not enter the syringe.