2,2'-(4-Amino-4H-1,2,4-triazole-3,5-di-yl)diphenol.

The structure of the title compound, C(14)H(12)N(4)O(2), was determined as part of a project on the coordination chemistry of 1,2,4-triazole derivatives. In the crystal structure, one of the two benzene rings is almost coplanar with the five-membered triazole ring (mean deviation = 0.019 Å), whereas the second benzene ring is rotated by 51.

Poly(methyl methacrylate)-graft-oligoamines as low cytotoxic and efficient nonviral gene vectors.

A series of poly(methyl methacrylate)-graft-oligoamines (PMMA-g-oligoamines), including PMMA-g-DETA, PMMA-g-TETA and PMMA-g-TEPA, were synthesized through aminolysis of the PMMA with diethylenetriamine, triethylenetetramine and tetraethylenepentamine. Agarose gel retardation assay indicated that PMMA-g-oligoamines had good binding capability with plasmid DNA, and the binding capability increased with increasing length of oligoamines and content of nitrogen (N%). The results of particle size, zeta potential and morphology observation further showed that the PMMA-g-oligoamines could condense DNA efficiently and the PMMA-g-oligoamine/DNA complexes were uniform nanospheres.

Surface and micelle properties of novel multi-dentate surfactants.

Novel multi-dentate surfactants, based on alkyl amines of varying hydrophobicity were synthesized, and molecular structures were characterized by IR, UV-vis, NMR and FAB-MS. The new surfactants have good water solubility and are highly efficient at reducing aqueous surface tension. Small-angle neutron scattering (SANS) studies were carried out with aqueous solutions in D(2)O to study aggregation.

Oil-in-water nanoemulsions for pesticide formulations.

A two-step process for formation of nanoemulsions in the system water/poly(oxyethylene) nonionic surfactant/methyl decanoate at 25 degrees C is described. First, all the components were mixed at a certain composition to prepare a microemulsion concentrate, which was rapidly subjected into a large dilution into water to generate an emulsion. Bluish transparent oil-in-water (O/W) nanoemulsions were formed only when the concentrate was located in the bicontinuous microemulsion (BC) or oil-in-water microemulsion (Wm) region.

The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions.

Application of a multi-dentate amphiphilic compound to transfer silver nanoparticles into an organic solvent.

A multi-dentate amphiphilic compound, 3,3'-(dodecylazanediyl)-bis-[N-(2-aminoethyl)propanamide] (12C-2NH2) has been synthesized. The molecular structure was characterized by Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectra, nuclear magnetic resonance (NMR) spectra, and fast atom bombardment mass (FAB-MS) spectra. 12C-2NH2 was employed to stabilize silver nanoparticles.

[Biological properties study and animal experiment of polylactide/polytrimethylene carbonate blends membrane].

Polylactide is a biodegradable and biocompatible biomaterial. Based on the PLA (Polylactide) membrane, we have produced a new PLA/PTMC (Polytrimethylene carbonate) blends membrane. The biological properties of this membrane were studied by cell toxicity experiment, acute toxicity experiment, skin irritant experiment, sensitization test, hemolytic test, micronucleus test and subcutaneous implantation test.

Microregion detection of ionic liquid microemulsions.

Nonaqueous ionic liquid (IL) microemulsion consisting of IL, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), surfactant TX-100, and toluene was prepared and the phase behavior of the ternary system was investigated. Electrical conductivity measurement was used for investigating the microregions of the nonaqueous IL microemulsions. On the basis of the percolation theory, the bmimBF(4)-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF(4) (O/IL) microregions of the microemulsions were successfully identified using insulative toluene as the titration phase.

Effect of temperature on dynamic rheological behavior of discontinuous cubic liquid crystal.

The dynamic rheological properties of discontinuous cubic liquid crystal, formed by nonionic surfactant C(12-14)E(12), were investigated in the discrete and continuous patterns of raising temperature. In the discrete pattern, the discontinuous cubic phase appears in two types of viscoelastic behaviors under the melting points of cubic phase: elastic gel and viscoelastic liquid. When the discontinuous cubic phase begins to melt, it has the weak polymer-like viscoelasticity.

Aerobic biodegradation of alkylphenol ethoxylates.

Primary aerobic biodegradation of alkylphenol ethoxylates (APEOs) was studied using a new simple and fast porphyrin method, which did not require the extraction step. Extent of primary biodegradation of a nonylphenol ethoxylates (NP-10) was excess of 92% after 1.5 days, and reached 99% after 2 days, which was similar to the results obtained using modified CTAS (thiocyanate active substances) method.

Microstructure and rheological properties of liquid crystallines formed in Brij 97/water/IPM system.

The phase diagram of Brij 97/water/IPM systems was determined at 25 degrees C. Rich liquid crystalline phases including Lalpha, H1, and cubic Fd3m phases were identified by means of small angle X-ray scattering (SAXS). Microstructure transitions of liquid crystals with changes in surfactant concentration and oil content are explained qualitatively by the surfactant packing parameter (vL/aSlc).

Preparation and characterization of inclusion complexes of beta-cyclodextrin with ionic liquid.

The solubilities of beta-cyclodextrin (beta-CD), ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), and their mixture in water were determined, and the conductivity of these aqueous solutions was measured. It was demonstrated that beta-CD and bmimPF6 could enhance the solubility of each other, and the solubility curves of each were linear with gradients of about 1. The conductivity decreased remarkably with increasing beta-CD concentration, and a discernible break in the conductivity curve could be observed when beta-CD and bmimPF6 were equimolar in the solution.

TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C.

Molecular interaction in binary surfactant mixtures containing alkyl polyglycoside.

Surface tensions were measured for several binary mixtures of a multidegree polymerized alkyl polyglycoside, C12G1.46' with different types of surfactants in 0.1 M NaCl at 25 degrees C.

Hexagonal liquid crystalline phases formed in ternary systems of Brij 97-water-ionic liquids.

Phase diagrams of two ionic liquids: hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate (bmim-PF(6)) and relatively hydrophilic 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of Brij 97 were determined at 25 degrees C. Two hexagonal liquid crystalline phases formed in bmim-PF(6)- and bmim-BF(4)-containing ternary systems were investigated by means of small-angle X-ray scattering (SAXS) and rheological techniques, with comparison of composition and temperature effects. From analysis of the SAXS data, bmim-PF(6) is dominantly penetrated between the oxyethylene chains of surfactant molecules, whereas bmim-BF(4) is mainly located in the water layer of hexagonal phases.

The effect of additives on the water solubilization capacity and conductivity in n-pentanol microemulsions.

The influence of additives such as sodium salicylate and sodium chloride on the water solubilization capacity of AOT in n-pentanol solutions has been investigated. The water solubilization capacity is enhanced by sodium salicylate and decreased by sodium chloride. The percolation behavior of the water/AOT/n-pentanol system is studied by modifying the water concentration and temperature.