Evaluation of advanced methods and materials for construction of scintillation detector light guides.

New techniques for fabrication of optically clear structures (3D printing and casting) can be applied to fabrication of light guides, especially complex -shaped ones, for scintillation detectors. In this investigation, we explored the spectral transmissivity of sample light guides created with different fabrication methods and materials. A spectrophotometer was used to measure the transmissivity of the samples to determine their compatibility with a number of commonly used inorganic scintillators (NaI(Tl), BGO, LaBr, LaCr, CSI(Tl) and LYSO).

Deep residual-convolutional neural networks for event positioning in a monolithic annular PET scanner.

PET scanners based on monolithic pieces of scintillator can potentially produce superior performance characteristics (high spatial resolution and detection sensitivity, for example) compared to conventional PET scanners. Consequently, we initiated development of a preclinical PET system based on a single 7.2 cm long annulus of LYSO, called AnnPET.

A dedicated breast-PET/CT scanner: Evaluation of basic performance characteristics.

Purpose: Application of advanced imaging techniques, such as PET and x ray CT, can potentially improve detection of breast cancer. Unfortunately, both modalities have challenges in the detection of some lesions. The combination of the two techniques, however, could potentially lead to an overall improvement in diagnostic breast imaging.

Design and characterization of a low profile NaI(Tl) gamma camera for dedicated molecular breast tomosynthesis.

A new low profile gamma camera is being developed for use in a dual modality (x-ray transmission and gamma-ray emission) tomosynthesis system. Compared to the system's current gamma camera, the new camera has a larger field of view (~20×25 cm) to better match the system's x-ray detector (~23×29 cm), and is thinner (7.3 cm instead of 10.

Preclinical positron emission tomography scanner based on a monolithic annulus of scintillator: initial design study.

Positron emission tomography (PET) scanners designed for imaging of small animals have transformed translational research by reducing the necessity to invasively monitor physiology and disease progression. Virtually all of these scanners are based on the use of pixelated detector modules arranged in rings. This design, while generally successful, has some limitations.

Arrays of Segmented, Tapered Light Guides for Use with Large, Planar Scintillation Detectors.

Metabolic imaging techniques can potentially improve detection and diagnosis of cancer in women with radiodense and/or fibrocystic breasts. Our group has previously developed a high-resolution positron emission tomography imaging and biopsy device (PEM-PET) to detect and guide the biopsy of suspicious breast lesions. Initial testing revealed that the imaging field-of-view (FOV) of the scanner was smaller than the physical size of the detector's active area, which could hinder sampling of breast areas close to the chest wall.

Construction and Evaluation of a Prototype High Resolution, Silicon Photomultiplier-Based, Tandem Positron Emission Tomography System.

While the performance of most current commercially available PET scanners is sufficient for many standard clinical applications, some specific tasks likely require specialized imaging systems. The goal of this project is to explore the capabilities and limitations of a small, high-resolution prototype system for obtaining PET images. The scanner consists of a tandem of detectors.