Minocycline reduces alveolar bone loss and bone damage in Wistar rats with experimental periodontitis.

This study aimed to investigate the impact of minocycline on the alveolar bone in experimental periodontitis in rats. Thirty Wistar rats were randomly assigned to three groups: control without periodontitis; experimental periodontitis induced by ligature; experimental periodontitis + intraperitoneal administration minocycline for seven days. Ligatures remained in place in both periodontitis groups for 14 days.

Effect of adding ytterbium trifluoride filler particles on the mechanical, physicochemical and biological properties of methacrylate-based experimental resins for 3D printing.

Objective: To formulate an experimental methacrylate-based photo-polymerizable resin for 3D printing with ytterbium trifluoride as filler and to evaluate the mechanical, physicochemical, and biological properties.

Methods: Resin matrix was formulated with 60 wt% UDMA, 40 wt% TEGDMA, 1 wt% TPO, and 0.01 wt% BHT.

Use of Local Melatonin with Xenogeneic Bone Graft to Treat Critical-Size Bone Defects in Rats with Osteoporosis: A Randomized Study.

The aim of this study was to evaluate the effect of local administration of melatonin (MLT) on molecular biomarkers and calvaria bone critical defects in female rats with or without osteoporosis, associated or not with a xenogeneic biomaterial. Forty-eight female rats were randomly divided into two groups: (O) ovariectomized and (S) placebo groups. After 45 days of osteoporosis induction, two critical-size defects (5 mm diameter) were created on the calvaria.

Physical training mitigates alveolar bone and blood enzymatic antioxidants defense impairment induced by binge ethanol consumption in rats.

We aimed to investigate the effectiveness of physical training as a protective strategy to mitigate alveolar bone damage and blood antioxidant defense caused by ethanol (EtOH) consumption in a binge-drinking pattern. Male Wistar rats aged approximately 90 days were divided into four groups: control, training, EtOH, and training + EtOH. The physical training protocol was conducted on a treadmill for four consecutive weeks, while the animals in the EtOH group were administered EtOH via orogastric gavage for three consecutive days each week, following the binge drink pattern.

development and optimization of cell-laden injectable bioprinted gelatin methacryloyl (GelMA) microgels mineralized on the nanoscale.

Bone defects may occur in different sizes and shapes due to trauma, infections, and cancer resection. Autografts are still considered the primary treatment choice for bone regeneration. However, they are hard to source and often create donor-site morbidity.

Poly(ɛ-caprolactone) and Eudragit E blends modulate the drug release profiles from FDM printlets.

Thermoplastic polymers have been used to produce filaments by hot melt extrusion (HME), which can be applied to obtain 3D printlets by fused deposition modelling (FDM). Poly(ε-caprolactone) (PCL) is a low melting point thermoplastic polymer that provides HME filaments with excellent mechanical and printability properties. However, due to the highly hydrophobic properties of PCL, they afford printlets with slow drug release behaviour.

Controlled drug delivery from metronidazole-containing bioactive endodontic cements.

Objectives: This study aims to formulate metronidazole liquid nanocapsules (MTZ) and evaluate their effect on the physicochemical and biological properties of calcium silicate-based bioactive endodontic cements, in vitro.

Methods: A MTZ suspension was formulated by deposition of the preformed polymer and characterized by laser diffraction and high-performance liquid chromatography (HPLC). Calcium silicate (CS) was mixed with a radiopaque agent (calcium tungstate - CaWO), at 10 wt%, to produce the cement powder.

Experimental Composite Resin with Myristyltrimethylammonium Bromide (MYTAB) and Alpha-Tricalcium Phosphate (α-TCP): Antibacterial and Remineralizing Effect.

The aim of this study was to develop an experimental composite resin with the addition of myristyltrimethylammonium bromide (MYTAB) and α -tricalcium phosphate (α-TCP) as an antibacterial and remineralizing material. Experimental composite resins composed of 75 wt% Bisphenol A-Glycidyl Methacrylate (BisGMA) and 25 wt% Triethylene Glycol Dimethacrylate (TEGDMA) were produced. Some 1 mol% Trimethyl benzoyl-diphenylphosphine oxide (TPO) was used as a photoinitiator, and butylated hydroxytoluene (BTH) was added as a polymerization inhibitor.

3D printed matrix solid forms: Can the drug solubility and dose customisation affect their controlled release behaviour?

The use of 3D printing in pharmaceutics has grown over the last years, along with the number of studies on the impact of the composition of these formulations on their pharmaceutical and biopharmaceutical properties. Recently, we reported the combined effect of the infill percentage and the presence of a pore former on the drug release behaviour of 3D printed matrix solid forms prepared by fused deposition modelling. However, there are some open questions about the effect of the drug solubility and the size of these dosage forms on their controlled release properties.

Orthodontic resins loaded with niobium silicate particles: Impact of filler concentration on the physicochemical and biological properties.

Objectives: White spot lesions (WSL) are prevalent in patients using orthodontic appliances. The presence of ion-releasing compounds in the tooth-appliance interface may limit enamel demineralization to control WSL incidence. Thus, this study aims to evaluate the mineral formation on SiNb-containing experimental orthodontic resins and the influence of these fillers on the physicochemical and biological properties of developed materials.

Synthesis of silver core-shell nanoparticles and their influence on an experimental resin endodontic sealer: An in vitro analysis.

Aim: To avoid root canal recontamination and endodontic treatment failure, endodontic sealers with antibacterial activity could be an alternative. Silver nanoparticles have antibacterial activity and this study aimed to synthesize Ag@SiO nanoparticles, incorporate them into an experimental endodontic resin sealer and evaluate their influence on physicochemical and biological properties.

Methodology: Ag@SiO nanoparticles were produced using the sol-gel process, based on the Stöber method.

Açaí ( Mart.) Attenuates Oxidative Stress and Alveolar Bone Damage in Experimental Periodontitis in Rats.

Açaí ( Mart.) juice is rich in phenolic compounds with high antioxidant capacity. It has been observed that the use of antioxidants may be an additional strategy to nonsurgical periodontal therapy as well as to prevent alveolar bone loss.

Biological Activity of Copaiba in Damage to the Alveolar Bone in a Model of Periodontitis Induced in Rats.

Several studies have investigated the effects of natural products in the treatment of diseases. Traditional Amazonian populations commonly use copaiba due to its well-known anti-inflammatory, antibacterial, and healing properties. In this study, we aimed to investigate the effects of systemic administration of copaiba oleoresin ( Ducke) on ligature-induced periodontitis in rats.

In utero and lactational exposure to methylmercury elicits physical-chemical and morphological damages in the alveolar bone of offspring rats: The first toxicological findings.

Methylmercury (MeHg) is the most common organic form of mercury (Hg) that humans are exposed and is considered an environmental pollutant. Several populations that live in endemic regions of MeHg exposure are subject to the toxicant for long periods, including pregnant women and children, causing damage to several organs during early periods of development. Alveolar bone is an essential structure for the oral cavity, responsible for supporting teeth and masticatory forces.

Fluoride exposure duringintrauterine and lactation periods promotes changes in the offspring rats' alveolar bone.

The importance of fluoride (F) for oral health is well established in the literature. However, evidence suggests that excessive exposure to this mineral is associated with adverse effects at different life stages and may affect many biological systems, especially mineralized tissues. The purpose of this study was to investigate the effects of F exposure during pregnancy and breastfeeding on the alveolar bone of the offspring since the alveolar bone is one of the supporting components of the dental elements.

Alkyl trimethyl ammonium bromide for the formulation of antibacterial orthodontic resins.

Objectives: This study aimed at formulating antibacterial orthodontic resins containing alkyl trimethyl ammonium bromide (ATAB) and evaluating their physicochemical and biological properties.

Materials And Methods: The chemical composition and microstructure of ATAB was characterized through FTIR and SEM, respectively. Experimental orthodontic BisGMA/TEGDMA-based resins were formulated, and the ATAB filler was incorporated at 1wt%, 5wt%, and 10wt%, along with colloidal silica (5wt%).

In-vitro models of biocompatibility testing for restorative dental materials: From 2D cultures to organs on-a-chip.

Dental caries is a biofilm-mediated, diet-modulated, multifactorial and dynamic disease that affects more than 90% of adults in Western countries. The current treatment for decayed tissue is based on using materials to replace the lost enamel or dentin. More than 500 million dental restorations are placed annually worldwide, and materials used for these purposes either directly or indirectly interact with dentin and pulp tissues.

Implementation in restorative treatments in public health: a 10-year analysis of resin composite procurement in Brazil.

This study aims to assess the resin composite purchases in a public health system and understand the variables associated with its cost and with the decision-making process over a period of 10 years. Secondary data collection was performed using the Brazilian Healthcare Prices Database (BDHP) from 2010 to 2019. All conventional and bulk-fill composites were selected.

Impact of economic factors and knowledge translation on public procurement for dental adhesive systems.

This study aimed to screen the public procurement for dental adhesives in a public health system and evaluate the variables associated with the type and cost of purchased materials. A time series was conducted with secondary data collated from the Brazilian Databank of Healthcare Prices (BDHP). All public procurements for adhesive systems registered from 2010 to 2019 were collated.

3D printing of poly(butylene adipate-co-terephthalate) (PBAT)/niobium containing bioactive glasses (BAGNb) scaffolds: Characterization of composites, in vitro bioactivity, and in vivo bone repair.

This study aimed to produce poly(butylene adipate-co-terephthalate) (PBAT)/niobium containing bioactive glasses (BAGNb) composites scaffolds produced by fused deposition modeling (FDM) printing and evaluate their physicochemical and biological properties in vitro and in vivo. The composite filaments were produced by melt-extrusion with the addition of 10 wt% of BAGNb (PBAT/BAGNb). Filaments without BAGNb were produced as the control group (PBAT).

Nanoscale mineralization of cell-laden methacrylated gelatin hydrogels using calcium carbonate-calcium citrate core-shell microparticles.

Conventional biomaterials developed for bone regeneration fail to fully recapitulate the nanoscale structural organization and complex composition of the native bone microenvironment. Therefore, despite promoting osteogenic differentiation of stem cells, they fall short of providing the structural, biochemical, and mechanical stimuli necessary to drive osteogenesis for bone regeneration and function. To address this, we have recently developed a novel strategy to engineer bone-like tissue using a biomimetic approach to achieve rapid and controlled nanoscale mineralization of a cell-laden matrix in the presence of osteopontin, a non-collagenous protein, and a supersaturated solution of calcium and phosphate medium.

Polybutylene-adipate-terephthalate and niobium-containing bioactive glasses composites: Development of barrier membranes with adjusted properties for guided bone regeneration.

This study aimed to develop bioactive guided bone regeneration (GBR) membranes by manufacturing PBAT/BAGNb composites as casting films. Composites were produced by melt-extrusion, and BAGNb was added at 10 wt%, 20 wt%, and 30 wt% concentration. Pure PBAT membranes were used as a control (0wt%BAGNb).

Long-term exposure to low doses of aluminum affects mineral content and microarchitecture of rats alveolar bone.

Aluminum (Al) is one of the most found elements in nature in many forms, and human exposure can be quite common. Therefore, it is important to investigate the effects of exposure to Al mainly at low doses and for a prolonged period, in order to simulate human exposure in the periodontium, an important structure for support and protection of the teeth. This investigation aimed to study the aluminum chloride (AlCl) toxicological effects in the mineral composition and micromorphology of the alveolar bone of rats.

Binge-Like Exposure During Adolescence Induces Detrimental Effects in Alveolar Bone that Persist in Adulthood.

Background: Alcohol (EtOH) intake during adolescence has become an important public health issue. Although the detrimental effects of EtOH intake on the musculoskeletal system are well known, only a few studies have investigated its impact on the stomatognathic system of adolescents. This study aimed to investigate the effect of EtOH binge drinking on the alveolar bone and the long-term consequences after abstinence.