Atomically synergistic Zn-Cr catalyst for iso-stoichiometric co-conversion of ethane and CO to ethylene and CO.

Developing atomically synergistic bifunctional catalysts relies on the creation of colocalized active atoms to facilitate distinct elementary steps in catalytic cycles. Herein, we show that the atomically-synergistic binuclear-site catalyst (ABC) consisting of [Formula: see text]-O-Cr on zeolite SSZ-13 displays unique catalytic properties for iso-stoichiometric co-conversion of ethane and CO. Ethylene selectivity and utilization of converted CO can reach 100 % and 99.

Ternary NiMo-Bi liquid alloy catalyst for efficient hydrogen production from methane pyrolysis.

Methane pyrolysis (MP) is a potential technology for CO-free hydrogen production that generates only solid carbon by-products. However, developing a highly efficient catalyst for stable methane pyrolysis at a moderate temperature has been challenging. We present a new and highly efficient catalyst created by modifying a Ni-Bi liquid alloy with the addition of Mo to produce a ternary NiMo-Bi liquid alloy catalyst (LAC).

Formation of active sites on transition metals through reaction-driven migration of surface atoms.

Adopting low-index single-crystal surfaces as models for metal nanoparticle catalysts has been questioned by the experimental findings of adsorbate-induced formation of subnanometer clusters on several single-crystal surfaces. We used density functional theory calculations to elucidate the conditions that lead to cluster formation and show how adatom formation energies enable efficient screening of the conditions required for adsorbate-induced cluster formation. We studied a combination of eight face-centered cubic transition metals and 18 common surface intermediates and identified systems relevant to catalytic reactions, such as carbon monoxide (CO) oxidation and ammonia (NH) oxidation.

Reversible dehydrogenation and rehydrogenation of cyclohexane and methylcyclohexane by single-site platinum catalyst.

Developing highly efficient and reversible hydrogenation-dehydrogenation catalysts shows great promise for hydrogen storage technologies with highly desirable economic and ecological benefits. Herein, we show that reaction sites consisting of single Pt atoms and neighboring oxygen vacancies (V) can be prepared on CeO (Pt/CeO) with unique catalytic properties for the reversible dehydrogenation and rehydrogenation of large molecules such as cyclohexane and methylcyclohexane. Specifically, we find that the dehydrogenation rate of cyclohexane and methylcyclohexane on such sites can reach values above 32,000 mol mol h, which is 309 times higher than that of conventional supported Pt nanoparticles.

Chloride-Assisted Corrosion of Copper and Protection by Benzotriazole.

The structure and composition of copper surfaces in aqueous solutions of benzotriazole (BTAH) and NaCl was investigated by sum frequency vibrational spectroscopy as a function of concentration and bias during cyclic voltammetry experiments. We found that the protection provided by the BTAH films formed at the copper surface is effective for negative bias voltages below the open circuit potential (OCP) but not at positive voltages where Cl displaces BTAH. By measuring the Gibbs adsorption energy of BTAH and Cl, we found that a particularly stable Cl structure is formed around the OCP, suggesting that electronegative additives that move the OCP to higher negative values can improve BTAH protection, which we confirmed by the addition of a negatively charged sodium dodecyl sulfate surfactant.

Nanoparticle Assembly Induced Ligand Interactions for Enhanced Electrocatalytic CO Conversion.

The microenvironment in which the catalysts are situated is as important as the active sites in determining the overall catalytic performance. Recently, it has been found that nanoparticle (NP) surface ligands can actively participate in creating a favorable catalytic microenvironment, as part of the nanoparticle/ordered-ligand interlayer (NOLI), for selective CO conversion. However, much of the ligand-ligand interactions presumed essential to the formation of such a catalytic interlayer remains to be understood.

Insights into the Mechanism of Methanol Steam Reforming Tandem Reaction over CeO Supported Single-Site Catalysts.

We demonstrated how the special synergy between a noble metal single site and neighboring oxygen vacancies provides an "ensemble reaction pool" for high hydrogen generation efficiency and carbon dioxide (CO) selectivity of a tandem reaction: methanol steam reforming. Specifically, the hydrogen generation rate over single site Ru/CeO catalyst is up to 9360 mol H per mol Ru per hour (579 mL g s) with 99.5% CO selectivity.

Mechanism of Methanol Decomposition over Single-Site Pt/CeO Catalyst: A DRIFTS Study.

Single-site catalysts have drawn broad attention in catalysis because of their maximum atomic utilization and unique catalytic performance. Early work in our group has shown a 40-fold higher activity of methanol decomposition over single-site Pt/CeO catalyst than CeO supported 2.5 nm Pt nanoparticles, while a molecular-level understanding of such enhancement is lacking.

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets.

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.

Insights into the Mechanism of -Hexane Reforming over a Single-Site Platinum Catalyst.

We demonstrate that the single-site catalyst Pt/CeO greatly enhances the selectivity of cyclization and aromatization in the -hexane reforming reaction. Specifically, the selectivity of single-site Pt/CeO toward both cyclization and aromatization is above 86% at 350 °C. The turnover frequency of Pt/CeO is 58.

CO Oxidation Mechanisms on CoO-Pt Thin Films.

The reaction of CO and O with submonolayer and multilayer CoO films on Pt(111), to produce CO, was investigated at room temperature in the mTorr pressure regime. Using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoO films significantly enhances the CO oxidation activity to form CO upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C.

Unsaturated Ligands Seed an Order to Disorder Transition in Mixed Ligand Shells of CdSe/CdS Quantum Dots.

A phase transition within the ligand shell of core/shell quantum dots is studied in the prototypical system of colloidal CdSe/CdS quantum dots with a ligand shell composed of bound oleate (OA) and octadecylphosphonate (ODPA). The ligand shell composition is tuned using a ligand exchange procedure and quantified through proton NMR spectroscopy. Temperature-dependent photoluminescence spectroscopy reveals a signature of a phase transition within the organic ligand shell.

Efficient Hydrogen Production from Methanol Using a Single-Site Pt/CeO Catalyst.

Hydrogen is regarded as an attractive alternative energy carrier due to its high gravimetric energy density and only water production upon combustion. However, due to its low volumetric energy density, there are still some challenges in practical hydrogen storage and transportation. In the past decade, using chemical bonds of liquid organic molecules as hydrogen carriers to generate hydrogen in situ provided a feasible method to potentially solve this problem.

Oligomerization of Light Olefins Catalyzed by Brønsted-Acidic Metal-Organic Framework-808.

Sulfated metal-organic framework-808 (S-MOF-808) exhibits strong Brønsted-acidic character which makes it a potential candidate for the heterogeneous acid catalysis. Here, we report the isomerization and oligomerization reactions of light olefins (C3-C6) over S-MOF-808 at relatively low temperatures and ambient pressure. Different products (dimers, isomers, and heavier oligomers) were obtained for different olefins, and effective C-C coupling was observed between isobutene and isopentene.

Bioinspired Metal-Organic Framework Catalysts for Selective Methane Oxidation to Methanol.

Particulate methane monooxygenase (pMMO) is an enzyme that oxidizes methane to methanol with high activity and selectivity. Limited success has been achieved in incorporating biologically relevant ligands for the formation of such active site in a synthetic system. Here, we report the design and synthesis of metal-organic framework (MOF) catalysts inspired by pMMO for selective methane oxidation to methanol.

Identification of the strong Brønsted acid site in a metal-organic framework solid acid catalyst.

It remains difficult to understand the surface of solid acid catalysts at the molecular level, despite their importance for industrial catalytic applications. A sulfated zirconium-based metal-organic framework, MOF-808-SO, was previously shown to be a strong solid Brønsted acid material. In this report, we probe the origin of its acidity through an array of spectroscopic, crystallographic and computational characterization techniques.

Structure of Copper-Cobalt Surface Alloys in Equilibrium with Carbon Monoxide Gas.

We studied the structure of the copper-cobalt (CuCo) surface alloy, formed by Co deposition on Cu(110), in dynamic equilibrium with CO. Using scanning tunneling microscopy (STM), we found that, in vacuum at room temperature and at low Co coverage, clusters of a few Co atoms substituting Cu atoms form at the surface. At CO pressures in the Torr range, we found that up to 2.

The effect of aluminum and platinum additives on hydrogen adsorption on mesoporous silicates.

Recent theoretical predictions indicate that functional groups and additives could have a favorable impact on the hydrogen adsorption characteristics of sorbents; however, no definite evidence has been obtained to date and little is known about the impact of such modifications on the thermodynamics of hydrogen uptake and overall capacity. In this work, we investigate the effect of two types of additives on the cryoadsorption of hydrogen to mesoporous silica. First, Lewis and Brønsted acid sites were evaluated by grafting aluminum to the surface of mesoporous silica (MCF-17) and characterizing the resulting silicate materials' surface area and the concentration of Brønsted and Lewis acid sites created.

Supported Au Nanoparticles with N-Heterocyclic Carbene Ligands as Active and Stable Heterogeneous Catalysts for Lactonization.

Attachment of N-heterocyclic carbenes (NHCs) on the surface of metal nanoparticle (NP) catalysts permits fine-tuning of catalytic activity and product selectivity. Yet, NHC-coated Au NPs have been seldom used in catalysis beyond hydrogenation chemistry. One challenge in this field has been to develop a platform that permits arbitrary ligand modification without having to compromise NP stability toward aggregation or leaching.

Fluoroethylene Carbonate Induces Ordered Electrolyte Interface on Silicon and Sapphire Surfaces as Revealed by Sum Frequency Generation Vibrational Spectroscopy and X-ray Reflectivity.

The cyclability of silicon anodes in lithium ion batteries (LIBs) is affected by the reduction of the electrolyte on the anode surface to produce a coating layer termed the solid electrolyte interphase (SEI). One of the key steps for a major improvement of LIBs is unraveling the SEI's structure-related diffusion properties as charge and discharge rates of LIBs are diffusion-limited. To this end, we have combined two surface sensitive techniques, sum frequency generation (SFG) vibrational spectroscopy, and X-ray reflectivity (XRR), to explore the first monolayer and to probe the first several layers of electrolyte, respectively, for solutions consisting of 1 M lithium perchlorate (LiClO) salt dissolved in ethylene carbonate (EC) or fluoroethylene carbonate (FEC) and their mixtures (EC/FEC 7:3 and 1:1 wt %) on silicon and sapphire surfaces.

Fluoroethylene Carbonate as a Directing Agent in Amorphous Silicon Anodes: Electrolyte Interface Structure Probed by Sum Frequency Vibrational Spectroscopy and Ab Initio Molecular Dynamics.

Fluorinated compounds are added to carbonate-based electrolyte solutions in an effort to create a stable solid electrolyte interphase (SEI). The SEI mitigates detrimental electrolyte redox reactions taking place on the anode's surface upon applying a potential in order to charge (discharge) the lithium (Li) ion battery. The need for a stable SEI is dire when the anode material is silicon as silicon cracks due to its expansion and contraction upon lithiation and delithiation (charge-discharge) cycles, consequently limiting the cyclability of a silicon-based battery.

Dendrimer-Stabilized Metal Nanoparticles as Efficient Catalysts for Reversible Dehydrogenation/Hydrogenation of N-Heterocycles.

Nanoparticles (Pd, Pt, Rh) stabilized by G4OH PAMAM dendrimers and supported in SBA-15 (MNPs/SBA-15 with M = Pd, Pt, Rh) were efficiently used as catalysts in the acceptorless dehydrogenation of tetrahydroquinoline/indoline derivatives in toluene (release of H) at 130 °C. These catalysts are air stable, very active, robust, and recyclable during the process. The reverse hydrogenation reaction of quinoline derivatives (H storage) was also optimized and successfully performed in the presence of the same catalysts in toluene at 60 °C under only 1 atm of hydrogen gas.

Surface Structures of Model Metal Catalysts in Reactant Gases.

Atomic scale knowledge of the surface structure of a metal catalyst is essential for fundamentally understanding the catalytic reactions performed on it. A correlation between the true atomic surface structure of a metal catalyst under reaction conditions and the corresponding catalytic performance is the key in pursuing mechanistic insight at a molecular level. Here the surface structures of model, metal catalysts in both ultrahigh vacuum (UHV) and gaseous environments of CO at a wide range of pressures are discussed.

Hydroisomerization of n-Hexane Using Acidified Metal-Organic Framework and Platinum Nanoparticles.

Exceptionally high surface area and ordered nanopores of a metal-organic framework (MOF) are exploited to encapsulate and homogeneously disperse a considerable amount of phosphotungstic acid (PTA). When combined with platinum nanoparticles positioned on the external surface of the MOF, the construct shows a high catalytic activity for hydroisomerization of n-hexane, a reaction requiring hydrogenation/dehydrogenation and moderate to strong Brønsted acid sites. Characterization of the catalytic activity and acidic sites as a function of PTA loading demonstrates that both the concentration and strength of acidic sites are highest for the catalyst with the largest amount of PTA.