Combining Polymer and Cyclodextrin Strategy for Drug Release of Sulfadiazine from Electrospun Fibers.

This study reports the fabrication of polymeric matrices through electrospinning using polymethyl methacrylate (PMMA) and poly(lactic-co-glycolic acid) (PLGA), biocompatible polymers commonly used in medical systems. These polymers were combined with an antibacterial drug, sulfadiazine sodium salt (SDS) or its supramolecular system formed with hydroxypropyl-β-cyclodextrin (HPβ/CD) at 1:1 molar ratio, aiming to assemble a transdermal drug delivery system. The formation of fibers was confirmed by scanning electron microscopy (SEM), and the fibers' surface properties were analyzed using contact angle and water vapor permeability techniques.

Bioglass/collagen scaffolds combined with bone marrow stromal cells on bone healing in an experimental model in cranial defects in rats.

This study aimed to develop bone regenerative therapeutic strategies, based on the addition of bone marrow stromal cells (BMSC) on bioglass/collagen (BG/COL) scaffolds. For this purpose, an in vivo study was conducted using tissue response of the BG/COL scaffolds combined with BMSC in a critical-size defects. Wistar rats were submitted to the surgical procedure to perform the cranial critical size bone defects and distributed in four groups (20 animals per group): Control Group (CG) (rats submitted to the cranial bone defect surgery without treatment), Bioglass Group (BG) (rats treated with BG), BG/COL Group (rats treated with BG/COL) and Bioglass/Collagen and BMSC Group (BG/COL/BMSC) (rats treated with BG/COL scaffolds enriched with BMSCs).

A systematic review and meta-analysis of the effect of thymol as an anti-inflammatory and wound healing agent: A review of thymol effect on inflammation and wound healing: A review of thymol effect on inflammation and wound healing.

Thymol (THY) exhibits antibacterial and antioxidant properties. Recent studies have also shown that THY presents anti-inflammatory and healing properties. This review focused on in vitro and in vivo investigations related to THY utilization, as an anti-inflammatory and/or wound healing agent.

COVID-19 (SARS-CoV-2) infection and thrombotic conditions: A systematic review and meta-analysis.

Background: COVID-19 is an infectious disease caused by SARS-CoV-2 associated with haematological manifestations (thrombolytic events).

Aims: Considering the high prevalence of the thrombotic scenarios associated with COVID-19, the aim of this study was to perform a systematic review of the available literature, concerning the relation of COVID-19 and the thrombotic events, and identify prognostic factors for these events.

Materials & Methods: PubMed, Web of Science and Scopus databases were searched.

Effect of arginine on microorganisms involved in dental caries: a systematic literature review of studies.

This systematic review aimed to discuss the effects of arginine on caries-related microorganisms in different biofilm models. The eligibility criteria were studies that evaluated the effect of arginine at different concentrations on caries-related microorganisms using biofilm models. Eighteen studies published between 2012 and 2019 were included.

Photobiomodulation guided healing in a sub-critical bone defect in calvarias of rats.

Background: Photobiomodulation presents stimulatory effects on tissue metabolism, constituting a promising strategy to produce bone tissue healing.

Objective: the aim of the present study was to investigate the in vivo performance of PBM using an experimental model of cranial bone defect in rats.

Material And Methods: rats were distributed in 2 different groups (control group and PBM group).

Bioglass/PLGA associated to photobiomodulation: effects on the healing process in an experimental model of calvarial bone defect.

Bioactive glasses (BG) are known for their ability to bond to bone tissue. However, in critical situations, even the osteogenic properties of BG may be not enough to induce bone consolidation. Thus, the enrichment of BG with polymers such as Poly (D, L-lactic-co-glycolic) acid (PLGA) and associated to photobiomodulation (PBM) may be a promising strategy to promote bone tissue healing.

Association of Bioglass/Collagen/Magnesium composites and low level irradiation: effects on bone healing in a model of tibial defect in rats.

Background And Aims: Bioglass (BG) and Magnesium (Mg) composites have been used for bone tissue engineering proposes due to its osteogenic activity and increased mechanical properties respectively. The introduction of Collagen (Col) is a common and efficient approach for bone tissue engineering applications toward cell proliferation. Recently, studies demonstrated that BG/Col/Mg composites presented proper mechanical properties and were non-cytotoxic.

Influence of the incorporation of marine spongin into a Biosilicate®: an in vitro study.

The combination of different biomaterials can be a promising intervention for the composites manufacture, mainly by adding functional and structural characteristics of each material and guarantee the advantages of the use of these composites. In this context, the aim of this study was to develop and evaluated the influence of the incorporation of marine spongin (SPG) into Biosilicate® (BS) in different proportions be used during bone repair. For this purpose, it was to develop and investigate different BS/SPG formulations for physico-chemical and morphological characteristics by pH, loss mass, Fourier transform infrared spectrometer (FTIR) and scanning electron microscope (SEM) analysis.

Characterization and Cytotoxicity Evaluation of a Marine Sponge Biosilica.

Bone fractures characterize an important event in the medical healthcare, being related to traumas, aging, and diseases. In critical conditions, such as extensive bone loss and osteoporosis, the tissue restoration may be compromised and culminate in a non-union consolidation. In this context, the osteogenic properties of biomaterials with a natural origin have gained prominence.

Alendronate release from calcium phosphate cement for bone regeneration in osteoporotic conditions.

Osteoporosis represents a major health problem in terms of compromising bone strength and increasing the risk of bone fractures. It can be medically treated with bisphosphonates, which act systemically upon oral or venous administration. Further, bone regenerative treatments in osteoporotic conditions present a challenge.

Incorporation of Collagen from Marine Sponges (Spongin) into Hydroxyapatite Samples: Characterization and In Vitro Biological Evaluation.

Biomaterial-based bone grafts have an important role in the field of bone tissue engineering. One of the most promising classes of biomaterials is collagen, including the ones from marine biodiversity (in general, called spongin (SPG)). Also, hydroxyapatite (HA) has an important role in stimulating bone metabolism.

Vacuumed collagen-impregnated bioglass scaffolds: Characterization and influence on proliferation and differentiation of bone marrow stromal cells.

This study evaluated physical-chemical characteristics of a vacuumed collagen-impregnated bioglass (BG) scaffolds and bone marrow stromal cells (BMSCs) behavior on those composites. scanning electron microscope and energy dispersive x-ray spectroscope demonstrated collagen (Col) was successfully introduced into BG. Vacuum impregnation system has showed efficiency for Col impregnation in BG scaffolds (approximately 20 wt %).

Bacterial cellulose membrane used as biological dressings on third-degree burns in rats.

Introduction: Burn injuries represent a high risk of morbidity and mortality. The wound healing process is complex and requires the participation of different types of cells. Therefore, new biomaterials, which innovate the wound healing process, are being investigated.

Putty-like bone fillers based on CaP ceramics or Biosilicate® combined with carboxymethylcellulose: Characterization, optimization, and evaluation.

Calcium phosphates and bioactive glass ceramics have been considered promising biomaterials for use in surgeries. However, their moldability should be further enhanced. We here thereby report the handling, physicochemical features, and morphological characteristics of formulations consisting of carboxymethylcellulose-glycerol and hydroxyapatite-tricalcium phosphate or Biosilicate® particles.

Calcium phosphate fibers coated with collagen: In vivo evaluation of the effects on bone repair.

The aim of this study was to assess the characteristics of the CaP/Col composites, in powder and fiber form, via scanning electron microscopy (SEM), pH and calcium release evaluation after immersion in SBF and to evaluate the performance of these materials on the bone repair process in a tibial bone defect model. For this, four different formulations (CaP powder - CaPp, CaP powder with collagen - CaPp/Col, CaP fibers - CaPf and CaP fibers with collagen - CaPf/Col) were developed. SEM images indicated that both material forms were successfully coated with collagen and that CaPp and CaPf presented HCA precursor crystals on their surface.

Porous poly (D,L-lactide-co-glycolide) acid/biosilicate composite scaffolds for bone tissue engineering.

This study evaluated the effects of the Biosilicate and poly (D,L-lactic-co-glycolic) acid composites on bone repair in a tibial bone defect model in rats by means of using histological evaluation (histopathological and morphometric analysis) and gene expression analysis. Eighty male Wistar rats (12 weeks old, weighing ±300 g) were randomly divided into two groups: Biosilicate group (BG) and Biosilicate /PLGA group (BG/PLGA). Each group was euthanized at 3, 7, 14, and 21 days after surgery (n = 10 animals per time point).

Effect of a new bioactive fibrous glassy scaffold on bone repair.

Researchers have investigated several therapeutic approaches to treat non-union fractures. Among these, bioactive glasses and glass ceramics have been widely used as grafts. This class of biomaterial has the ability to integrate with living bone.

Characterization and biocompatibility of a fibrous glassy scaffold.

Bioactive glasses (BGs) are known for their ability to bond to living bone and cartilage. In general, they are readily available in powder and monolithic forms, which are not ideal for the optimal filling of bone defects with irregular shapes. In this context, the development of BG-based scaffolds containing flexible fibres is a relevant approach to improve the performance of BGs.