Streamlining the Highly Reproducible Fabrication of Fibrous Biomedical Specimens toward Standardization and High Throughput.

Soft nano- and microfiber-based polymer scaffolds bear enormous potential for their use in cell culture and tissue engineering since they mimic natural collagen structures and may thus serve as biomimetic adhesive substrates. They have, however, so far been restricted to small-scale production in research labs with high batch-to-batch variation. They are commonly produced via electrospinning or melt electrowriting and their delicate nature poses obstacles in detachment, storage, and transportation.

Enhanced antifungal activity of siRNA-loaded anionic liposomes against the human pathogenic fungus .

We developed siRNA-loaded anionic liposomes, co-encapsulating low-dose amphotericin B, to enhance siRNA penetration through the fungal cell wall of . Targeting mRNAs of three key genes, these liposomes visibly inhibited fungal growth, demonstrating for the first time the antifungal potential of siRNA against human fungal pathogens.

S. aureus develops biofilms on titanium within 2 weeks in vitro.

Background: The formation of biofilms, characterized by cell aggregation and extracellular polymeric substance (EPS) production, is a common feature of periprosthetic joint infections (PJI).

Objective: The current study aimed to investigate the development of biofilm features in vitro within less than 3 weeks by Staphylococcus aureus isolated from PJIs.

Methods: Biofilms were grown on sandblasted titanium discs, and fluorescence spectroscopy and microscopy were used to observe biofilm maturation for 21 days.

Cancer cell migration depends on adjacent ASC and adipose spheroids in a 3D bioprinted breast cancer model.

Breast cancer develops in close proximity to mammary adipose tissue and interactions with the local adipose environment have been shown to drive tumor progression. The specific role, however, of this complex tumor microenvironment in cancer cell migration still needs to be elucidated. Therefore, in this study, a 3D bioprinted breast cancer model was developed that allows for a comprehensive analysis of individual tumor cell migration parameters in dependence of adjacent adipose stroma.

Beyond the Charge: Interplay of Nanogels' Functional Group and Zeta-Potential for Antifungal Drug Delivery to Human Pathogenic Fungus Aspergillus Fumigatus.

The ubiquitous mold Aspergillus fumigatus (A. fumigatus) is one of the main fungal pathogens causing invasive infections in immunocompromised humans. Conventional antifungal agents exhibit limited efficacy and often cause severe side effects.

On-chip fabrication and in-flow 3D-printing of microgel constructs: from chip to scaffold materials in one integral process.

Bioprinting has evolved into a thriving technology for the fabrication of cell-laden scaffolds. Bioinks are the most critical component for bioprinting. Recently, microgels have been introduced as a very promising bioink, enabling cell protection and the control of the cellular microenvironment.

On the reproducibility of extrusion-based bioprinting: round robin study on standardization in the field.

The outcome of three-dimensional (3D) bioprinting heavily depends, amongst others, on the interaction between the developed bioink, the printing process, and the printing equipment. However, if this interplay is ensured, bioprinting promises unmatched possibilities in the health care area. To pave the way for comparing newly developed biomaterials, clinical studies, and medical applications (i.

Flexible Allyl-Modified Gelatin Photoclick Resin Tailored for Volumetric Bioprinting of Matrices for Soft Tissue Engineering.

Volumetric bioprinting (VBP) is a light-based 3D printing platform, which recently prompted a paradigm shift for additive manufacturing (AM) techniques considering its capability to enable the fabrication of complex cell-laden geometries in tens of seconds with high spatiotemporal control and pattern accuracy. A flexible allyl-modified gelatin (gelAGE)-based photoclick resin is developed in this study to fabricate matrices with exceptionally soft polymer networks (0.2-1.

Direct ink writing of multifunctional nanocellulose and allyl-modified gelatin biomaterial inks for the fabrication of mechanically and functionally graded constructs.

Recreating the intricate mechanical and functional gradients found in natural tissues through additive manufacturing poses significant challenges, including the need for precise control over time and space and the availability of versatile biomaterial inks. In this proof-of-concept study, we developed a new biomaterial ink for direct ink writing, allowing the creation of 3D structures with tailorable functional and mechanical gradients. Our ink formulation combined multifunctional cellulose nanofibrils (CNFs), allyl-functionalized gelatin (0.

3D Bioprinting in Microgravity: Opportunities, Challenges, and Possible Applications in Space.

3D bioprinting has developed tremendously in the last couple of years and enables the fabrication of simple, as well as complex, tissue models. The international space agencies have recognized the unique opportunities of these technologies for manufacturing cell and tissue models for basic research in space, in particular for investigating the effects of microgravity and cosmic radiation on different types of human tissues. In addition, bioprinting is capable of producing clinically applicable tissue grafts, and its implementation in space therefore can support the autonomous medical treatment options for astronauts in future long term and far-distant space missions.

Volumetric Printing Across Melt Electrowritten Scaffolds Fabricates Multi-Material Living Constructs with Tunable Architecture and Mechanics.

Major challenges in biofabrication revolve around capturing the complex, hierarchical composition of native tissues. However, individual 3D printing techniques have limited capacity to produce composite biomaterials with multi-scale resolution. Volumetric bioprinting recently emerged as a paradigm-shift in biofabrication.

Adjusting Degree of Modification and Composition of gelAGE-Based Hydrogels Improves Long-Term Survival and Function of Primary Human Fibroblasts and Endothelial Cells in 3D Cultures.

This study aimed to develop a suitable hydrogel-based 3D platform to support long-term culture of primary endothelial cells (ECs) and fibroblasts. Two hydrogel systems based on allyl-modified gelatin (gelAGE), G and G, were cross-linked via thiol-ene click reaction with a four-arm thiolated polyethylene glycol (PEG-4-SH). Compared to G, the G hydrogel was characterized by the lower polymer content and cross-linking density with a softer matrix and homogeneous and open porosity.

Biomimetic In Vitro Lung Models: Current Challenges and Future Perspective.

As post-COVID complications, chronic respiratory diseases are one of the foremost causes of mortality. The quest for a cure for this recent global challenge underlines that the lack of predictive in vitro lung models is one of the main bottlenecks in pulmonary preclinical drug development. Despite rigorous efforts to develop biomimetic in vitro lung models, the current cutting-edge models represent a compromise in numerous technological and biological aspects.

Design of Nanohydrogels for Targeted Intracellular Drug Transport to the Trans-Golgi Network.

Nanohydrogels combine advantages of hydrogels and nanoparticles. In particular, they represent promising drug delivery systems. Nanogel synthesis by oxidative condensation of polyglycidol prepolymers, that are modified with thiol groups, results in crosslinking by disulfide bonds.

Real-Time Measurement of Cell Mechanics as a Clinically Relevant Readout of an In Vitro Lung Fibrosis Model Established on a Bioinspired Basement Membrane.

Lung fibrosis, one of the major post-COVID complications, is a progressive and ultimately fatal disease without a cure. Here, an organ- and disease-specific in vitro mini-lung fibrosis model equipped with noninvasive real-time monitoring of cell mechanics is introduced as a functional readout. To establish an intricate multiculture model under physiologic conditions, a biomimetic ultrathin basement (biphasic elastic thin for air-liquid culture conditions, BETA) membrane (<1 µm) is developed with unique properties, including biocompatibility, permeability, and high elasticity (<10 kPa) for cell culturing under air-liquid interface and cyclic mechanical stretch conditions.

Machine Learning Reveals a General Understanding of Printability in Formulations Based on Rheology Additives.

Hydrogel ink formulations based on rheology additives are becoming increasingly popular as they enable 3-dimensional (3D) printing of non-printable but biologically relevant materials. Despite the widespread use, a generalized understanding of how these hydrogel formulations become printable is still missing, mainly due to their variety and diversity. Employing an interpretable machine learning approach allows the authors to explain the process of rendering printability through bulk rheological indices, with no bias toward the composition of formulations and the type of rheology additives.

Layer-by-layer assembly methods and their biomedical applications.

Layer-by-layer (LbL) assembly has attracted much interest because of its ability to provide nanoscale control over film characteristics and because of a wide choice of available materials. The methods of LbL not only determine the process properties, but also directly affect film properties. In this review, we will discuss LbL methodologies that have been used in biomedical fields.

Evaluation of the Influence of Biosurface Design on the Interaction between the Regulatory Peptide RS1-reg and ODC1 Reveals a Membrane-Dependent Affinity Increase.

The regulatory solute carrier protein, family 1, member 1 (RS1) modulates via its N-terminal domain RS1-reg the activity of Na -d-glucose cotransporter 1 (SGLT1) and thereby the glucose uptake in the small intestine by blocking the release of SGLT1-containing vesicles at the trans-Golgi network (TGN). The antidiabetic activity of RS1 is mediated by ornithindecarboxylase 1 (ODC1), catalyzing the conversion of ornithine to putrescine. Putrescine can bind to a buddying protein complex for SGLT1-containing vesicles at the membrane of the TGN, triggering vesicle release.

A Print-and-Fuse Strategy for Sacrificial Filaments Enables Biomimetically Structured Perfusable Microvascular Networks with Functional Endothelium Inside 3D Hydrogels.

A facile and flexible approach for the integration of biomimetically branched microvasculature within bulk hydrogels is presented. For this, sacrificial scaffolds of thermoresponsive poly(2-cyclopropyl-2-oxazoline) (PcycloPrOx) are created using melt electrowriting (MEW) in an optimized and predictable way and subsequently placed into a customized bioreactor system, which is then filled with a hydrogel precursor solution. The aqueous environment above the lower critical solution temperature (LCST) of PcycloPrOx at 25 °C swells the polymer without dissolving it, resulting in fusion of filaments that are deposited onto each other (print-and-fuse approach).

Calcium phosphate-based biomaterials trigger human macrophages to release extracellular traps.

As central part of the innate immune response, immune cells fight against invaders through various mechanisms, such as the release of extracellular traps (ETs). While this mechanism is mainly known for neutrophils in biomaterial contact, the release of macrophage extracellular traps (METs) in response to biomaterials has not yet been reported. An important application area for biomaterials is bone, where healing of defects of a critical size requires the implantation of grafts, which are often composed of calcium phosphates (CaPs).

Dual setting brushite-gelatin cement with increased ductility and sustained drug release.

A novel dual setting brushite-gelatin cement was achieved by genip ininitiated cross-linking of gelatin during cement setting. Although the combination of an inorganic and organic phase resulted in a decrease of the compressive strength from about 10 MPa without polymeric phase to 3-6-MPa for gelatin modified composites, an increase in elastic properties due to the gelatin hydrogel with a concentration of 10.0 w/v% was achieved.

Freeform printing of thermoresponsive poly(2-cyclopropyl-oxazoline) as cytocompatible and on-demand dissolving template of hollow channel networks in cell-laden hydrogels.

Conventional additive-manufacturing technologies rely on the vertical stacking of layers, whereas each layer provides the structural integrity for the upcoming one. This inherently gives rise to limitations in freedom of design especially when structures containing large voids or truly 3D pathways for printed filaments are aspired. An especially interesting technique, which overcomes these layer limitations, is freeform printing, where thermoplastic materials are printed in 3D through controlling the temperature profile such that the polymer melt solidifies right when it exits the nozzle.

Preservation of the naïve features of mesenchymal stromal cells in vitro: Comparison of cell- and bone-derived decellularized extracellular matrix.

The fate and behavior of bone marrow mesenchymal stem/stromal cells (BM-MSC) is bidirectionally influenced by their microenvironment, the stem cell niche, where a magnitude of biochemical and physical cues communicate in an extremely orchestrated way. It is known that simplified 2D in vitro systems for BM-MSC culture do not represent their naïve physiological environment. Here, we developed four different 2D cell-based decellularized matrices (dECM) and a 3D decellularized human trabecular-bone scaffold (dBone) to evaluate BM-MSC behavior.

Cell Adhesion Assessment Reveals a Higher Force per Contact Area on Fibrous Structures Compared to Flat Substrates.

The distribution and density of ligands have a determinant role in cell adhesion on planar substrates. At the same time, planar surfaces are nonphysiological for most cells, and cell behavior on planar and topographical surfaces is significantly different, with fibrous structures being the most natural environment for cells. Despite phenomenological examinations, the role of adhesion ligand density in the fibrous scaffold for cell adhesion strength has so far not been assessed.

Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues.

In 3D bioprinting for cartilage regeneration, bioinks that support chondrogenic development are of key importance. Growth factors covalently bound in non-printable hydrogels have been shown to effectively promote chondrogenesis. However, studies that investigate the functionality of tethered growth factors within 3D printable bioinks are still lacking.