Modeling Study of SiN Waveguides on a Sapphire Platform for Photonic Integration Applications.

Sapphire has various applications in photonics due to its broadband transparency, high-contrast index, and chemical and physical stability. Photonics integration on the sapphire platform has been proposed, along with potentially high-performance lasers made of group III-V materials. In parallel with developing active devices for photonics integration applications, in this work, silicon nitride optical waveguides on a sapphire substrate were analyzed using the commercial software Comsol Multiphysics in a spectral window of 800~2400 nm, covering the operating wavelengths of III-V lasers, which could be monolithically or hybridly integrated on the same substrate.

Algorithm-Based Linearly Graded Compositions of GeSn on GaAs (001) via Molecular Beam Epitaxy.

The growth of high-composition GeSn films in the future will likely be guided by algorithms. In this study, we show how a logarithmic-based algorithm can be used to obtain high-quality GeSn compositions up to 16% on GaAs (001) substrates via molecular beam epitaxy. Herein, we use composition targeting and logarithmic Sn cell temperature control to achieve linearly graded pseudomorph GeSn compositions up to 10% before partial relaxation of the structure and a continued gradient up to 16% GeSn.

The growth of Ge and direct bandgap GeSn on GaAs (001) by molecular beam epitaxy.

Germanium tin (GeSn) is a tuneable narrow bandgap material, which has shown remarkable promise for the industry of near- and mid-infrared technologies for high efficiency photodetectors and laser devices. Its synthesis is challenged by the lattice mismatch between the GeSn alloy and the substrate on which it is grown, sensitively affecting its crystalline and optical qualities. In this article, we investigate the growth of Ge and GeSn on GaAs (001) substrates using two different buffer layers consisting of Ge/GaAs and Ge/AlAs molecular beam epitaxy.

The Growth of Polarization Domains in Ultrathin Ferroelectric Films Seeded by the Tip of an Atomic Force Microscope.

Piezoresponse force microscopy is used to study the velocity of the polarization domain wall in ultrathin ferroelectric barium titanate (BTO) films grown on strontium titanate (STO) substrates by molecular beam epitaxy. The electric field due to the cone of the atomic force microscope tip is demonstrated as the dominant electric field for domain expansion in thin films at lateral distances greater than about one tip diameter away from the tip. The velocity of the domain wall under the applied electric field by the tip in BTO for thin films (less than 40 nm) followed an expanding process given by Merz's law.

Coherent-interface-induced strain in large lattice-mismatched materials: A new approach for modeling Raman shift.

Unlabelled: Strain engineering as one of the most powerful techniques for tuning optical and electronic properties of Ill-nitrides requires reliable methods for strain investigation. In this work, we reveal, that the linear model based on the experimental data limited to within a small range of biaxial strains (< 0.2%), which is widely used for the non-destructive Raman study of strain with nanometer-scale spatial resolution is not valid for the binary wurtzite-structure group-III nitrides GaN and AlN.

Impact of defects on photoexcited carrier relaxation dynamics in GeSn thin films.

We report the results of a study that was conducted to investigate the recombination paths of photoexcited charge carriers in GeSn thin films. The charge carrier lifetime was predicted as a function of temperature from a description of photoconductivity transients, assuming co-influence of Shockley-Read-Hall and radiative carrier recombination paths. We identify that dislocations are the source of a band of electronic states with the highest occupied state at E + (85÷90) meV that acts as Shockley-Read-Hall centers determining the charge carrier lifetime.

Photoluminescence characterization of wetting layer and carrier dynamics for coupled InGaAs/GaAs surface quantum dot pair structures.

The optical properties are investigated by spectroscopic characterizations for bilayer InGaAs/GaAs quantum dot (QD) structures consisting of a layer of surface quantum dots (SQDs) separated from a layer of buried quantum dots (BQDs) by different GaAs spacers with thicknesses of 7 nm, 10.5 nm and 70 nm. The coupling from the BQDs to SQDs leads to carrier transfer for the two samples with thin spacers, 7 nm and 10.

Photoluminescence of InAs/GaAs quantum dots under direct two-photon excitation.

Self-assembled quantum dots grown by molecular beam epitaxy have been a hotbed for various fundamental research and device applications over the past decades. Among them, InAs/GaAs quantum dots have shown great potential for applications in quantum information, quantum computing, infrared photodetection, etc. Though intensively studied, some of the optical nonlinear properties of InAs/GaAs quantum dots, specifically the associated two-photon absorption of the wetting and barrier layers, have not been investigated yet.

Type-II GaSb quantum dots grown on InAlAs/InP (001) by droplet epitaxy.

GaSb quantum dots (QDs) have been grown by droplet epitaxy within InAlAs barrier layers on an InP (001) substrate. The droplet growth mode facilitates a larger size (average height ∼4.5 nm) and a lower density (∼6.

Interplay Effect of Temperature and Excitation Intensity on the Photoluminescence Characteristics of InGaAs/GaAs Surface Quantum Dots.

We investigate the optical properties of InGaAs surface quantum dots (SQDs) in a composite nanostructure with a layer of similarly grown buried quantum dots (BQDs) separated by a thick GaAs spacer, but with varied areal densities of SQDs controlled by using different growth temperatures. Such SQDs behave differently from the BQDs, depending on the surface morphology. Dedicated photoluminescence (PL) measurements for the SQDs grown at 505 °C reveal that the SQD emission follows different relaxation channels while exhibiting abnormal thermal quenching.

Polarization Effects in Graded AlGaN Nanolayers Revealed by Current-Sensing and Kelvin Probe Microscopy.

We experimentally demonstrate that the conductivity of graded AlGaN increases as a function of the magnitude of the Al concentration gradient (%Al/nm) due to polarization doping effects, without the use of impurity dopants. Using three up/down-graded AlGaN nanolayers with Al gradients ranging from ∼0.16 to ∼0.

Toward Single Atom Chains with Exfoliated Tellurium.

We demonstrate that the atom chain structure of Te allows it to be exfoliated as ultra-thin flakes and nanowires. Atomic force microscopy of exfoliated Te shows that thicknesses of 1-2 nm and widths below 100 nm can be exfoliated with this method. The Raman modes of exfoliated Te match those of bulk Te, with a slight shift (4 cm) due to a hardening of the A and E modes.

Charge carrier relaxation in InGaAs-GaAs quantum wire modulation-doped heterostructures.

The time dependencies of the carrier relaxation in modulation-doped InGaAs-GaAs low-dimensional structures with quantum wires have been studied as functions of temperature and light excitation levels. The photoconductivity (PC) relaxation follows a stretched exponent with decay constant, which depends on the morphology of InGaAs epitaxial layers, presence of deep traps, and energy disorder due to inhomogeneous distribution of size and composition. A hopping model, where electron tunnels between bands of localized states, gives appropriate interpretation for temperature-independent PC decay across the temperature range 150-290 K.

Physicochemical characteristics of pristine and functionalized graphene.

Graphene-based nanomaterials have received significant attention in the last decade due to their interesting properties. Its electrical and thermal conductivity and strength make graphene well suited for a variety of applications, particularly for use as a composite material in plastics. Furthermore, much work is taking place to utilize graphene as a biomaterial for uses such as drug delivery and tissue regeneration scaffolds.

Infrared Reflectance Analysis of Epitaxial n-Type Doped GaN Layers Grown on Sapphire.

Infrared (IR) reflectance spectroscopy is applied to study Si-doped multilayer n/n/n-GaN structure grown on GaN buffer with GaN-template/sapphire substrate. Analysis of the investigated structure by photo-etching, SEM, and SIMS methods showed the existence of the additional layer with the drastic difference in Si and O doping levels and located between the epitaxial GaN buffer and template. Simulation of the experimental reflectivity spectra was performed in a wide frequency range.

Near Infrared Quantum Cutting Luminescence of Er/Tm Ion Pairs in a Telluride Glass.

The multiphoton near-infrared, quantum cutting luminescence in Er/Tm co-doped telluride glass was studied. We found that the near-infrared 1800-nm luminescence intensity of (A) Er(8%)Tm(0.5%):telluride glass was approximately 4.

Adhesive force between graphene nanoscale flakes and living biological cells.

We report on a measurement technique that quantifies the adhesive force between multi-layers of graphene flakes and the cell wall of live Escherichia coli cells using atomic force microscopy (AFM) in-fluid Peak Force- Quantitative Nanomechanical Mapping mode. To measure the adhesive force, we made use of the negative charge of E. coli cells to allow them to stick to positively charged surfaces, such as glass or silicon, that were covered by poly-L-Lysine.

Photoluminescence Study of the Interface Fluctuation Effect for InGaAs/InAlAs/InP Single Quantum Well with Different Thickness.

Photoluminescence (PL) is investigated as a function of the excitation intensity and temperature for lattice-matched InGaAs/InAlAs quantum well (QW) structures with well thicknesses of 7 and 15 nm, respectively. At low temperature, interface fluctuations result in the 7-nm QW PL exhibiting a blueshift of 15 meV, a narrowing of the linewidth (full width at half maximum, FWHM) from 20.3 to 10 meV, and a clear transition of the spectral profile with the laser excitation intensity increasing four orders in magnitude.

Photoconductivity Relaxation Mechanisms of InGaAs/GaAs Quantum Dot Chain Structures.

An experimental study of the photoconductivity time decay in InGaAs/GaAs quantum dot chain structures is reported. Different photoconductivity relaxations resulting from spectrally selecting photoexcitation of InGaAs QWR or QDs as well as GaAs spacers were measured. The photoconductivity relaxation after excitation of 650 nm follows a stretched exponent with decay constant dependent on morphology of InGaAs epitaxial layers.

Comparative study of photoluminescence from InGaAs/GaAs surface and buried quantum dots.

The optical properties of InGaAs/GaAs surface quantum dots (SQDs) and buried QDs (BQDs) are investigated by photoluminescence (PL) measurements. The integrated PL intensity, linewidth, and lifetime of SQDs are significantly different from the BQDs both at room temperature and at low temperature. The differences in PL response, measured at both steady state and in transient, are attributed to carrier transfer between the surface states and the SQDs.

Surface effects of vapour-liquid-solid driven Bi surface droplets formed during molecular-beam-epitaxy of GaAsBi.

Herein we investigate a (001)-oriented GaAs1-xBix/GaAs structure possessing Bi surface droplets capable of catalysing the formation of nanostructures during Bi-rich growth, through the vapour-liquid-solid mechanism. Specifically, self-aligned "nanotracks" are found to exist trailing the Bi droplets on the sample surface. Through cross-sectional high-resolution transmission electron microscopy the nanotracks are revealed to in fact be elevated above surface by the formation of a subsurface planar nanowire, a structure initiated mid-way through the molecular-beam-epitaxy growth and embedded into the epilayer, via epitaxial overgrowth.

Optical Properties of a Quantum Dot-Ring System Grown Using Droplet Epitaxy.

Electronic and optical properties of InAs/GaAs nanostructures grown by the droplet epitaxy method are studied. Carrier states were determined by k · p theory including effects of strain and In gradient concentration for a model geometry. Wavefunctions are highly localized in the dots.

The Peculiarities of Strain Relaxation in GaN/AlN Superlattices Grown on Vicinal GaN (0001) Substrate: Comparative XRD and AFM Study.

Superlattices (SLs) consisting of symmetric layers of GaN and AlN have been investigated. Detailed X-ray diffraction and reflectivity measurements demonstrate that the relaxation of built-up strain in the films generally increases with an increasing number of repetitions; however, an apparent relaxation for subcritical thickness SLs is explained through the accumulation of Nagai tilt at each interface of the SL. Additional atomic force microscopy measurements reveal surface pit densities which appear to correlate with the amount of residual strain in the films along with the appearance of cracks for SLs which have exceeded the critical thickness for plastic relaxation.

Two-photon, three-photon, and four-photon near-infrared quantum cutting luminescence of an Er activator in tellurium glass phosphor.

Multiphoton near-IR downconversion quantum cutting luminescence of Er-ion-doped tellurium glass is studied. We find that the excitation spectra of 1532.0 nm IR light and 550.