CALCULATIONS OF SHUTDOWN DOSE RATE FOR THE TPR SPECTROMETER OF THE HIGH-RESOLUTION NEUTRON SPECTROMETER FOR ITER.

This work presents results of the calculations performed in order to predict the neutron-induced activity in structural materials that are considered to be using at the TPR spectrometer-one of the detection system of the High-Resolution Neutron Spectrometer for ITER. An attempt has been made to estimate the shutdown dose rates in a Cuboid #1 and to check if they satisfy ICRP regulatory requirements for occupational exposure to radiation and ITER nuclear safety regulations for areas with personal access. The results were obtained by the MCNP and FISPACT-II calculations.

Pulsed thermal neutron source at the fast neutron generator.

A small pulsed thermal neutron source has been designed based on results of the MCNP simulations of the thermalization of 14 MeV neutrons in a cluster-moderator which consists of small moderating cells decoupled by an absorber. Optimum dimensions of the single cell and of the whole cluster have been selected, considering the thermal neutron intensity and the short decay time of the thermal neutron flux. The source has been built and the test experiments have been performed.

The filter/moderator arrangement-optimisation for the boron-neutron capture therapy (BNCT).

The paper presents results of the numerical modelling of the fission-converter-based epithermal neutron source designed for the boron neutron capture therapy (BNCT) facility to be located at the Polish research nuclear reactor MARIA at Swierk. The unique design of the fission converter has been proposed due to a specific geometrical surrounding of the reactor. The filter/moderator arrangement has been optimised to moderate fission neutrons to epithermal energies and to remove both fast neutrons and photons from the therapeutic beam.

The optimisation of the fast neutron and gamma-ray transmission set-up for moisture measurement of coke.

In the present paper, modelling calculations with the Monte Carlo (MCNP4C) code were performed for the optimisation of the fast neutron and gamma-ray transmission, set-up, used for the humidity measurement of coke. The optimisation focused on maximising the sensitivity of the neutron flux to humidity changes and on lowering neutron-counting error, both leading to higher accuracy of coke moisture determination. Different materials used for the source shielding and neutron collimation, together with different dimensions of the neutron collimators were studied.