Adhesion of resins to Ag-Pd alloys by means of the silicoating technique.

The purpose of the investigation was to study the effect of water storage on the bond strengths between silanized, silicoated Ag-Pd alloys and veneered composites, in comparison with the bond strengths of systems with conventional retention beads. Furthermore, the mechanism of the bonding was examined. The bond strength of silanized, silicoated dry specimens and similar specimens stored in water was measured by four-point bending.

Selective dissolution of AuCu and AuAg alloys in vitro and in vivo.

AuCu and AuAg alloys (30 at. % Au) have been immersed in aqueous solutions of chloride and sulphide with additions of protein (mucin). The surfaces of the alloys were subsequently analysed by means of ESCA and compared with previous and similar tests without addition of mucin.

Corrosion of a stainless steel with low nickel content under static conditions.

The pattern of selective release of chromium, iron and molybdenum from a non-prepassivated ferritic stainless steel, with the designation SS 2326 and a nickel content of 0.3%, has been measured in artificial saliva under static conditions using nuclear tracer and ESCA techniques. The ICP-method was used to detect nickel which was found only in one case.

Corrosion resistance of a passivated and non-passivated cobalt-chromium alloy.

The release of cobalt and chromium from a passivated and non-passivated cobalt-chromium alloy in artificial saliva has been measured using nuclear tracer technique. The corrosion resistance of the passivated specimens was improved by a factor of about four compared to the non-passivated specimens with regard to the initial cobalt release. The specimens were exposed to the saline solutions for periods up to about 8 wk.