Cellulose Acetate Membranes: Antibacterial Strategy and Application-A Review.

Developing antibacterial and biodegradable cellulose acetate (CA) membrane materials is one of the main challenges in multiple application fields. CA membrane materials are widely used in gas purification, water purification, and biomedical fields due to their environmental friendliness, high chemical and mechanical stability, excellent processability, and low cost. However, antibacterial modification of CA membrane materials to enhance their utilization value in the application process has always been the direction of researchers' efforts.

A Review of Carbon Nanofiber Materials for Dendrite-Free Lithium-Metal Anodes.

Lithium metal is regarded as ideal anode material due to its high theoretical specific capacity and low electrode potential. However, the uncontrollable growth of lithium dendrites seriously hinders the practical application of lithium-metal batteries (LMBs). Among various strategies, carbon nanofiber materials have shown great potential in stabilizing the lithium-metal anode (LMA) due to their unique functional and structural characteristics.

Polyphyllin I enhances tumor necrosis factor-related apoptosis-inducing ligand-induced inhibition of human osteosarcoma cell growth downregulating the Wnt/β-catenin pathway.

Objective: To investigate the synergistic effects of polyphyllin I (PPI) combined with tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) on the growth of osteosarcoma cells through downregulating the Wnt/β-catenin signaling pathway.

Methods: Cell viability, apoptosis and cell cycle distribution were examined using cell counting kit-8 and flow cytometry assays. The morphology of cancer cells was observed with inverted phase contrast microscope.

Identification and vitro verification of the potential drug targets of active ingredients of Chonglou in the treatment of lung adenocarcinoma based on EMT-related genes.

Lung adenocarcinoma (LUAD) is the main histological type of lung cancer with an unfavorable survival rate. Metastasis is the leading LUAD-related death with Epithelial-Mesenchymal Transition (EMT) playing an essential role. The anticancer efficacies of the active ingredients in Chonglou have been widely reported in various cancers.

Tailoring Dense, Orientation-Tunable, and Interleavedly Structured Carbon-Based Heat Dissipation Plates.

The controllability of the microstructure of a compressed hierarchical building block is essential for optimizing a variety of performance parameters, such as thermal management. However, owing to the strong orientation effect during compression molding, optimizing the alignment of materials perpendicular to the direction of pressure is challenging. Herein, to illustrate the effect of the ordered microstructure on heat dissipation, thermally conductive carbon-based materials are fabricated by tailoring dense, orientation-tunable, and interleaved structures.

Preparation and In Vitro Bioactivity Study of a Novel Hollow Mesoporous Bioactive Glass Nanofiber Scaffold.

In this study, a novel three-dimensional hollow mesoporous bioactive glass nanofiber scaffold has been synthesized with a template-assisted sol-gel method using bacterial cellulose (BC) as a template and nonionic triblock copolymer (P123) as a pore-directing agent, ethyl orthosilicate (TEOS), calcium nitrate tetrahydrate (CN), and triethyl phosphate (TEP) as glass precursors. Scanning and transmission electron microscopies, X-ray diffraction, nitrogen adsorption-desorption, and nuclear magnetic resonance method were applied to characterize the morphology, crystal structure, and chemical structure of the mesoporous bioactive glass nanofiber scaffold. Furthermore, the in vitro bioactivity and biocompatibility were also explored.

Oncogenetic Function and Prognostic Value of DNA Topoisomerase II Alpha in Human Malignances: A Pan-Cancer Analysis.

Increasing studies have revealed significant associations between with oncogenesis and prognosis of human cancers; however, pan-cancer analysis has not been reported. Here, we explored the potential carcinogenic function and the association with clinical outcomes of in 33 different human cancers. The results showed that was amplified in 31 investigated cancers; expression was significantly associated with metastasis of six different cancers and significantly associated with the survival of patients in ten different cancers; TOP2A-encoded protein was obviously upregulated in five available cancers; phosphorylated TOP2A protein at S1106 was significantly upregulated in all six available cancers.

Inverse Vulcanization of a Natural Monoene with Sulfur as Sustainable Electrochemically Active Materials for Lithium-Sulfur Batteries.

A novel soluble copolymer poly(S-MVT) was synthesized using a relatively quick one-pot solvent-free method, inverse vulcanization. Both of the two raw materials are sustainable, i.e.

Intratibial Osteosarcoma Cell Injection to Generate Orthotopic Osteosarcoma and Lung Metastasis Mouse Models.

Osteosarcoma is the most common primary bone cancer in children and adolescents, with lungs as the most common metastatic site. The five-year survival rate of osteosarcoma patients with pulmonary metastasis is less than 30%.Therefore, the utilization of mouse models mimicking the osteosarcoma development in humans is of great significance for understanding the fundamental mechanism of osteosarcoma carcinogenesis and pulmonary metastasis to develop novel therapeutics.

Cantharidin inhibits osteosarcoma proliferation and metastasis by directly targeting miR-214-3p/DKK3 axis to inactivate β-catenin nuclear translocation and LEF1 translation.

As the leading primary bone cancer in adolescents and children, osteosarcoma patients with metastasis show a five-year-survival-rate of 20-30%, without improvement over the past 30 years. Wnt/β-catenin is important in promoting osteosarcoma development. DKK3 is a Wnt/β-catenin antagonist and predicted to have the specific binding site in 3'-UTR with miR-214-3p.

Two-Dimensional GeTe: Air Stability and Photocatalytic Performance for Hydrogen Evolution.

As a key method to convert solar into chemical energy, photocatalytic water decomposition has garnered attention. Moreover, the development of graphene and graphene-like two-dimensional (2D) materials has brought fresh vitality in the field of photocatalysis. Here, we prepared two to four layers of GeTe nanosheets by ultrasonic-assisted liquid-phase exfoliation in argon and air, which we referred to as Ar-GeTe and O-GeTe, respectively.

A nanostructured porous carbon/MoO composite with efficient catalysis in polysulfide conversion for lithium-sulfur batteries.

Lithium-sulfur batteries are considered as the next generation of energy storage systems because of their high theoretical specific capacity and energy density. Unfortunately, the sluggish reaction kinetics, weak adsorption toward to lithium polysulfides, and slow lithium ion diffusion impede the smooth electrochemical process, resulting in the lithium-sulfur batteries with the unsatisfactory cycling stability and rate performance. Since it is recognized that polar metal oxides and doped nitrogen in carbon materials have chemical interaction with lithium polysulfides, a nanostructured nitrogen-doped porous carbon/MoO composite is synthesized through a simple hydrothermal method by using graphene oxide nanoribbon and phosphomolybdic acid hydrate as precursors.

Two-dimensional gersiloxenes with tunable bandgap for photocatalytic H evolution and CO photoreduction to CO.

The discovery of graphene and graphene-like two-dimensional materials has brought fresh vitality to the field of photocatalysis. Bandgap engineering has always been an effective way to make semiconductors more suitable for specific applications such as photocatalysis and optoelectronics. Achieving control over the bandgap helps to improve the light absorption capacity of the semiconductor materials, thereby improving the photocatalytic performance.

Two-Dimensional High-Quality Monolayered Triangular WS Flakes for Field-Effect Transistors.

Large-area uniform of single-crystal tungsten disulfide (WS) is important for advanced optoelectronics based on two-dimensional (2D) atomic crystals. However, difficulties in controlling the interrelated growth parameters restrict its development in devices. Herein, we present the synthesis of triangular monolayered WS flakes with good uniformity and single crystal by adjusting the introduction time of sulfur precursor and the distances between the sources and substrates to control the nucleation density.

Sonication-assisted liquid-phase exfoliated α-GeTe: a two-dimensional material with high Fe sensitivity.

We describe sonication-assisted liquid-phase exfoliation of rhombohedral germanium telluride (α-GeTe) to obtain a good dispersion of α-GeTe nanosheets in ethanol. The thickness of the α-GeTe nanosheets is dependent on the exfoliation conditions, and few-layer α-GeTe nanosheets of 2-4 layers and even monolayer α-GeTe were obtained. We use first-principles calculations to investigate the structural, electronic, and optical properties of monolayer and bulk α-GeTe and compare the optical band gap of centrifugally fractionated α-GeTe nanosheet dispersions with the computational predictions.