Widely distributable and retainable in-situ gelling material for treating myocardial infarction.

Intramyocardial hydrogel injection is a promising therapy to prevent negative remodeling following myocardial infarction (MI). In this study, we report a mechanism for in-situ gel formation without external stimulation, resulting in an injectable and tissue-retainable hydrogel for MI treatment, and investigate its therapeutic outcomes. A liquid-like polymeric solution comprising poly(3-acrylamidophenylboronic acid-co-acrylamide) (BAAm), polyvinyl alcohol (PVA), and sorbitol (S) increases the viscous modulus by reducing the pre-added sorbitol concentration is developed.

Photo-induced universal modification of small-diameter decellularized blood vessels with a hemocompatible peptide improves in vivo patency.

Decellularized vessels (DVs) have the potential to serve as available grafts for small-diameter vascular (<6 mm) reconstruction. However, the absence of functional endothelia makes them likely to trigger platelet aggregation and thrombosis. Luminal surface modification is an efficient approach to prevent thrombosis and promote endothelialization.

Long term observation of adipogenesis using novel bioabsorbable implants with larger size in a porcine model.

Introduction: The regeneration of adipose tissue in patients after breast cancer surgery would be desirable without the use of growth factors or cells to avoid potential recurrence and metastasis. We reported that prolate spheroidal-shaped poly-L-lactic acid (PLLA) mesh implants of approximately 18-mm polar diameter and 7.5-mm greatest equatorial diameter containing collagen sponge (CS) would be replaced by regenerated adipose tissue after implantation, thereby suggesting an innovative method for breast reconstruction.

Biomimetic-Engineered Silicone Hydrogel Contact Lens Materials.

Contact lenses are one of the most successful applications of biomaterials. The chemical structure of the polymers used in contact lenses plays an important role in determining the function of contact lenses. Different types of contact lenses have been developed based on the chemical structure of polymers.

Mechanical detection of interactions between proteins related to intermediate filament and transcriptional regulation in living cells.

Intermediate filaments (IF) bind to various proteins and regulate cell function in the cytoplasm. Recently, IFs were found to regulate gene expression by acting as capture scaffolds for transcription-related proteins and preventing their translocation into the nucleus. To reveal such transcriptional regulatory mechanisms controlled by IFs, a method to analyze the interaction between IFs and transcription-related proteins is necessary.

Cell-membrane-inspired polymers for constructing biointerfaces with efficient molecular recognition.

Fabrication of devices that accurately recognize, detect, and separate target molecules from mixtures is a crucial aspect of biotechnology for applications in medical, pharmaceutical, and food sciences. This technology has also been recently applied in solving environmental and energy-related problems. In molecular recognition, biomolecules are typically complexed with a substrate, and specific molecules from a mixture are recognized, captured, and reacted.

Photoinduced immobilization of 2-methacryloyloxyethyl phosphorylcholine polymers with different molecular architectures on a poly(ether ether ketone) surface.

Poly(ether ether ketone) (PEEK) has seen increasing use in biomedical fields as a replacement for metal implants. Accordingly, the surface functionalities of PEEK are important for the development of medical devices. We have focused on the application of photoinduced reactions in PEEK to immobilize a functional polymer radical generation on the surface, which can react with hydrocarbon groups.

Induction of mesenchymal stem cell differentiation by co-culturing with mature cells in double-layered 2-methacryloyloxyethyl phosphorylcholine polymer hydrogel matrices.

The effects of differentiated cells on stem cell differentiation were analyzed co-culturing using a cell-encapsulated double-layered hydrogel system. As a polymer hydrogel matrix, a water-soluble zwitterionic polymer having both a 2-methacryloyloxyethyl phosphorylcholine unit and a -vinylphenylboronic acid unit (PMBV), was complexed spontaneously with poly(vinyl alcohol) (PVA) under mild cell culture conditions. The creep modulus of the hydrogel was controlled by changing the composition of the polymer in the solution.

Nanoscaled Morphology and Mechanical Properties of a Biomimetic Polymer Surface on a Silicone Hydrogel Contact Lens.

Materials taking advantage of the characteristics of biological tissues are strongly sought after in medical science and bioscience. On the natural corneal tissue surface, the highly soft and lubricated surface is maintained by composite structures composed of hydrophilic biomolecules and substrates. To mimic this structure, the surface of a silicone hydrogel contact lens was modified with a biomimetic phospholipid polymer, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), and the nanoscaled morphology and mechanical properties of the surface were confirmed with advanced surface characterization and imaging techniques under an aqueous medium.

Preparation of Magnetic Hydrogel Microparticles with Cationic Surfaces and Their Cell-Assembling Performance.

Cationic magnetic hydrogel microparticles with high retention on cell surfaces were prepared using a two-step procedure. Using these magnetic hydrogel microparticles, cells were clustered with each other, and cell aggregates were prepared effectively. Cross-linked poly(vinyl alcohol) (PVA) hydrogel microparticles containing iron oxide nanoparticles were prepared.

Antifouling Silicone Hydrogel Contact Lenses with a Bioinspired 2-Methacryloyloxyethyl Phosphorylcholine Polymer Surface.

Inspired by the cell membrane surface as well as the ocular tissue, a novel and clinically applicable antifouling silicone hydrogel contact lens material was developed. The unique chemical and biological features on the surface on a silicone hydrogel base substrate were achieved by a cross-linked polymer layer composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), which was considered important for optimal on-eye performance. The effects of the polymer layer on adsorption of biomolecules, such as lipid and proteins, and adhesion of cells and bacteria were evaluated and compared with several conventional silicone hydrogel contact lens materials.

Interface of Phospholipid Polymer Grafting Layers to Analyze Functions of Immobilized Oligopeptides Involved in Cell Adhesion.

The aim of this study was to design a material surface for use in the analysis of the behavior of biomolecules at the interface of direct cell contact. A superhydrophilic surface was prepared with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), which was grafted onto a substrate with controlled polymer chain density. An arginine-glycine-aspartic acid (RGD) peptide was immobilized at the surface of the polymer graft surface (PMPC-RGD surface).

Surface characterization of a silicone hydrogel contact lens having bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer layer in hydrated state.

A silicone hydrogel contact lens material, with a unique chemical and physical structure has been designed for long-term ocular performance. Enhancement of this silicone hydrogel contact lens material was achieved through surface modification using a cross-linkable bioinspired 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which creates a soft surface gel layer on the silicone hydrogel base material. The surface properties of this MPC polymer-modified lens were characterized under hydrated condition revealing, inter alia, its unique polymer structure, excellent hydrophilicity, lubricity, and flexibility.

Direct photoreactive immobilization of water-soluble phospholipid polymers on substrates in an aqueous environment.

The purpose of this study is to achieve a simpler and safer surface modification of substrates using a photoreactive polymer in an aqueous environment. We synthesized water-soluble photoreactive polymers with both phenylazide groups and phosphorylcholine groups, poly(2-methacryloyloxyethyl phosphorylcholine-co-4-methacryl tetra(ethylene glycol)oxycarbonyl-4-phenylazide) (PMEPAz), via reversible addition fragmentation chain transfer polymerization. PMEPAz with different polymerization degrees were synthesized with a well-defined structure.

Effects of molecular architecture of photoreactive phospholipid polymer on adsorption and reaction on substrate surface under aqueous condition.

Water-soluble photoreactive polymers with both phosphorylcholine and benzophenone groups were synthesized for the reaction between the polymers and the substrate in aqueous medium. To control the polymer architecture, the living radical polymerization method was applied to the copolymerization of 2-methacryloyloxyethyl phosphorylcholine and benzophenone methacrylates. These polymers possess various architectures, such as linear polymers, polymers with hydrophobic terminals, and 4-armed star-like polymers, that could promote their adsorption on the substrate surfaces.

2-Methacryloyloxyethyl Phosphorylcholine Polymer Coating Inhibits Bacterial Adhesion and Biofilm Formation on a Suture: An and Study.

Initial bacterial adhesion to medical devices and subsequent biofilm formation are known as the leading causes of surgical site infection (SSI). Therefore, inhibition of bacterial adhesion and biofilm formation on the surface of medical devices can reduce the risk of SSIs. In this study, a highly hydrophilic, antibiofouling surface was prepared by coating the bioabsorbable suture surface with poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-n-butyl methacrylate) (PMB).

Water-Soluble and Cytocompatible Phospholipid Polymers for Molecular Complexation to Enhance Biomolecule Transportation to Cells in Vitro.

Water-soluble and cytocompatible polymers were investigated to enhance a transporting efficiency of biomolecules into cells in vitro. The polymers composed of a 2-methacryloyloxyethyl phosphorylcholine (MPC) unit, a hydrophobic monomer unit, and a cationic monomer unit bearing an amino group were synthesized for complexation with model biomolecules, siRNA. The cationic MPC polymer was shown to interact with both siRNA and the cell membrane and was successively transported siRNA into cells.

Effects of molecular interactions at various polymer brush surfaces on fibronectin adsorption induced cell adhesion.

The effects of protein adsorption on the polymer brush surfaces with well-defined chemical structures and physical properties were examined with respect to initial protein adsorption, structural changes to the adsorbed proteins, and subsequent cell adhesion. Four polymer brush surfaces with different hydrophilicities and charge states were prepared. The molecular interaction forces during adsorption-desorption processes of protein on the polymer brush surfaces depending on the chemical structure of the polymer were determined.

Phospholipid Polymer Hydrogel Matrices with Dually Immobilized Cytokines for Accelerating Secretion of the Extracellular Matrix by Encapsulated Cells.

Construction of 3D tissues by various types of cells with specific characteristics is an important and fundamental technology in tissue reconstruction medicine and animal-free diagnosis system. To do so, an excellent extracellular matrix (ECM) is needed for encapsulation of cells and maintaining cell activity. Spontaneously forming hydrogel matrix is used by complexation between two water-soluble polymers, 2-methacryloyloxyethyl phosphorylcholine polymer bearing phenylboronic acid groups and poly(vinyl alcohol).

Combination of two antithrombogenic methodologies for preventing thrombus formation on a poly(ether ether ketone) substrate.

To enhance the total antithrombogenicity of poly(ether ether ketone) (PEEK), we examined a combination of two methodologies for the suppression of activation in both the platelet and coagulation systems. A random copolymer (PMT) composed of a zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) unit and a cationic 2-methacryloyloxyethyl trimethylammonium chloride (TMAEMA) unit was grafted onto the PEEK surface by photoinduced self-initiated graft polymerization of the PEEK substrate (PMTx-g-PEEK). Then, negatively charged heparin was immobilized by ionic binding with TMAEMA units (Hep/PMTx-g-PEEK).

In situ surface modification on dental composite resin using 2-methacryloyloxyethyl phosphorylcholine polymer for controlling plaque formation.

Composite resins (CRs) are widely used as dental restorative materials for caries treatment. They cause problems of secondary caries since Streptococcus mutans stays in the dental plaque, which the surface exists and produces acidic compounds during metabolism. The dental plaque depositions are induced by the protein adsorption on the surface.

Short-term evaluation of thromboresistance of a poly(ether ether ketone) (PEEK) mechanical heart valve with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-grafted surface in a porcine aortic valve replacement model.

Improved thromboresistance of mechanical valves is desired to decrease the risk of thromboembolism and thrombosis and reduce the dosage of anticoagulation with a vitamin K antagonist (e.g., warfarin).

Photoinduced Surface Zwitterionization for Antifouling of Porous Polymer Substrates.

Surface functionalization of polymeric porous substrates is one of the most important requirements to enhance their applications in the biomedical field. In this study, we achieved photoinduced surface modification using a highly efficient reaction of hydrophilic polymers bearing phosphorylcholine groups. Polymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) units and 2-( N-ethylanilino)ethyl methacrylate units were synthesized with attention to the polymer architectures.

A surface graft polymerization process on chemically stable medical ePTFE for suppressing platelet adhesion and activation.

An effective surface grafting method for chemically inert and elaborately porous medical expanded-polytetrafluoroethylene (ePTFE) was developed. Although surface graft polymerization onto basic polymeric biomaterials has been widely studied, successful modification of the ePTFE surface has been lacking due to its high chemical resistance. Herein, we succeeded in surface graft polymerization onto ePTFE through glycidyl methacrylate (GMA) as a bridge linkage following argon (Ar) plasma treatment.