Cation-Doped Nanocarbons for Enhanced Perfluoroalkyl Substance Removal: Exotic Bottom-Up Solution Plasma Synthesis and Characterization.

Perfluorinated alkyl substances (PFAS), such as perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), are pervasive organic contaminants that are widespread in aquatic environments, posing significant health risks to humans and wildlife. Due to their persistent nature, urgent removal is necessary. Conventional adsorbents are inefficient at removing PFOS and PFOA, highlighting the need for alternative materials.

Na ion-exchanged zirconium phosphate crystal with high calcium ion selectivity.

We demonstrate hydrothermally grown sodium hydrogen zirconium phosphate ((Na,H)-ZrP) crystals exhibiting high calcium ion selectivity. The standard Gibbs free energies for Ca exchange on (Na,H)-ZrP and γ-type ZrP were estimated to be -10.1 and -4.

Engineering Vacancies for the Creation of Antisite Defects in Chemical Vapor Deposition Grown Monolayer MoS and WS via Proton Irradiation.

It is critical to understand the laws of quantum mechanics in transformative technologies for computation and quantum information science applications to enable the ongoing second quantum revolution calls. Recently, spin qubits based on point defects have gained great attention, since these qubits can be initiated, selectively controlled, and read out with high precision at ambient temperature. The major challenge in these systems is controllably generating multiqubit systems while properly coupling the defects.

Developments of inverse analysis by Kalman filters and Bayesian methods applied to geotechnical engineering.

The present paper reviews recent activities on inverse analysis strategies in geotechnical engineering using Kalman filters, nonlinear Kalman filters, and Markov chain Monte Carlo (MCMC)/Hamiltonian Monte Carlo (HMC) methods. Nonlinear Kalman filters with finite element method (FEM) broaden the choices of unknowns to be determined for not only parameters but also initial and/or boundary conditions, and the use of the posterior probability of the state variables can be widely applied to, for example, the decision making for design changes. The relevance of the unknowns and the observed values and the selection of the best sensor locations are some of the considerations made while using the Kalman filter FEM.

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS : The Effect of Edge Termination.

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants.

Effect of Pretreatment Conditions on the Precise Nanoporosity of Graphene Oxide.

Nanoscale pores in graphene oxide (GO) control various important functions. The nanoporosity of GO is sensitive to low-temperature heating. Therefore, it is important to carefully process GO and GO-based materials to achieve superior functions.

Single-Step Direct Laser Writing of Multimetal Oxygen Evolution Catalysts from Liquid Precursors.

We investigate a laser direct-write method to synthesize and deposit metastable, mixed transition metal oxides and evaluate their performance as oxygen evolution reaction catalysts. This laser processing method enabled the rapid synthesis of diverse heterogeneous alloy and oxide catalysts directly from cost-effective solution precursors, including catalysts with a high density of nanocrystalline metal alloy inclusions within an amorphous oxide matrix. The nanoscale heterogeneous structures of the synthesized catalysts were consistent with reactive force-field Monte Carlo calculations.

Photodegradation Protection in 2D In-Plane Heterostructures Revealed by Hyperspectral Nanoimaging: The Role of Nanointerface 2D Alloys.

Single-layer heterostructures exhibit striking quasiparticle properties and many-body interaction effects that hold promise for a range of applications. However, their properties can be altered by intrinsic and extrinsic defects, thus diminishing their applicability. Therefore, it is of paramount importance to identify defects and understand 2D materials' degradation over time using advanced multimodal imaging techniques.

Confined Crack Propagation in MoS Monolayers by Creating Atomic Vacancies.

In two-dimensional crystals, fractures propagate easily, thus restricting their mechanical reliability. This work demonstrates that controlled defect creation constitutes an effective approach to avoid catastrophic failure in MoS monolayers. A systematic study of fracture mechanics in MoS monolayers as a function of the density of atomic vacancies, created by ion irradiation, is reported.

Monolayer Vanadium-Doped Tungsten Disulfide: A Room-Temperature Dilute Magnetic Semiconductor.

Dilute magnetic semiconductors (DMS), achieved through substitutional doping of spin-polarized transition metals into semiconducting systems, enable experimental modulation of spin dynamics in ways that hold great promise for novel magneto-electric or magneto-optical devices, especially for two-dimensional (2D) systems such as transition metal dichalcogenides that accentuate interactions and activate valley degrees of freedom. Practical applications of 2D magnetism will likely require room-temperature operation, air stability, and (for magnetic semiconductors) the ability to achieve optimal doping levels without dopant aggregation. Here, room-temperature ferromagnetic order obtained in semiconducting vanadium-doped tungsten disulfide monolayers produced by a reliable single-step film sulfidation method across an exceptionally wide range of vanadium concentrations, up to 12 at% with minimal dopant aggregation, is described.

The effects of substitutional Fe-doping on magnetism in MoSand WSmonolayers.

Doping of two-dimensional (2D) semiconductors has been intensively studied toward modulating their electrical, optical, and magnetic properties. While ferromagnetic 2D semiconductors hold promise for future spintronics and valleytronics, the origin of ferromagnetism in 2D materials remains unclear. Here, we show that substitutional Fe-doping of MoSand WSmonolayers induce different magnetic properties.

Single-atom doping of MoS with manganese enables ultrasensitive detection of dopamine: Experimental and computational approach.

Two-dimensional transition metal dichalcogenides (TMDs) emerged as a promising platform to construct sensitive biosensors. We report an ultrasensitive electrochemical dopamine sensor based on manganese-doped MoS synthesized via a scalable two-step approach (with Mn ~2.15 atomic %).

Superconductivity enhancement in phase-engineered molybdenum carbide/disulfide vertical heterostructures.

Stacking layers of atomically thin transition-metal carbides and two-dimensional (2D) semiconducting transition-metal dichalcogenides, could lead to nontrivial superconductivity and other unprecedented phenomena yet to be studied. In this work, superconducting α-phase thin molybdenum carbide flakes were first synthesized, and a subsequent sulfurization treatment induced the formation of vertical heterolayer systems consisting of different phases of molybdenum carbide-ranging from α to γ' and γ phases-in conjunction with molybdenum sulfide layers. These transition-metal carbide/disulfide heterostructures exhibited critical superconducting temperatures as high as 6 K, higher than that of the starting single-phased α-MoC (4 K).

Nanocomposite desalination membranes made of aromatic polyamide with cellulose nanofibers: synthesis, performance, and water diffusion study.

Reverse osmosis membranes of aromatic polyamide (PA) reinforced with a crystalline cellulose nanofiber (CNF) were synthesized and their desalination performance was studied. Comparison with plain PA membranes shows that the addition of CNF reduced the matrix mobility resulting in a molecularly stiffer membrane because of the attractive forces between the surface of the CNFs and the PA matrix. Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy results showed complex formation between the carboxy groups of the CNF surface and the m- phenylenediamine monomer in the CNF-PA composite.

Surfactant-Mediated Growth and Patterning of Atomically Thin Transition Metal Dichalcogenides.

The role of additives in facilitating the growth of conventional semiconducting thin films is well-established. Apparently, their presence is also decisive in the growth of two-dimensional transition metal dichalcogenides (TMDs), yet their role remains ambiguous. In this work, we show that the use of sodium bromide enables synthesis of TMD monolayers a surfactant-mediated growth mechanism, without introducing liquefaction of metal oxide precursors.

Universal Substitutional Doping of Transition Metal Dichalcogenides by Liquid-Phase Precursor-Assisted Synthesis.

Doping lies at the heart of modern semiconductor technologies. Therefore, for two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), the significance of controlled doping is no exception. Recent studies have indicated that, by substitutionally doping 2D TMDs with a judicious selection of dopants, their electrical, optical, magnetic, and catalytic properties can be effectively tuned, endowing them with great potential for various practical applications.

Defect-mediated selective hydrogenation of nitroarenes on nanostructured WS.

Transition metal dichalcogenides (TMDs) are well known catalysts as both bulk and nanoscale materials. Two-dimensional (2-D) TMDs, which contain single- and few-layer nanosheets, are increasingly studied as catalytic materials because of their unique thickness-dependent properties and high surface areas. Here, colloidal 2H-WS nanostructures are used as a model 2-D TMD system to understand how high catalytic activity and selectivity can be achieved for useful organic transformations.

Defect creation in WSe with a microsecond photoluminescence lifetime by focused ion beam irradiation.

Defect engineering is important for tailoring the electronic and optical properties of two-dimensional materials, and the capability of generating defects of certain types at specific locations is meaningful for potential applications such as optoelectronics and quantum photonics. In this work, atomic defects are created in single-layer WSe2 using focused ion beam (FIB) irradiation, with defect densities spanning many orders of magnitude. The influences of defects are systematically characterized.

Nonlinear Dark-Field Imaging of One-Dimensional Defects in Monolayer Dichalcogenides.

One-dimensional defects in two-dimensional (2D) materials can be particularly damaging because they directly impede the transport of charge, spin, or heat and can introduce a metallic character into otherwise semiconducting systems. Current characterization techniques suffer from low throughput and a destructive nature or limitations in their unambiguous sensitivity at the nanoscale. Here we demonstrate that dark-field second harmonic generation (SHG) microscopy can rapidly, efficiently, and nondestructively probe grain boundaries and edges in monolayer dichalcogenides (i.

Electrochemically Exfoliated Graphene Electrode for High-Performance Rechargeable Chloroaluminate and Dual-Ion Batteries.

The current state-of-the-art positive electrode material for chloroaluminate ion batteries (AIBs) or dual-ion batteries (DIBs) is highly crystalline graphite; however, the rate capability of this material at high discharge currents is significantly reduced by the modest conductivity of graphite. This limitation is addressed through the use of graphene-based positive electrodes, which can improve the rate capability of these batteries due to their higher conductivity. However, conventional methods of graphene production induce a significant number of defects, which impair the performance of AIBs and DIBs.