The long-term transformation of Fe-As coprecipitates at room temperature under oxic conditions: New insights for the fate and the speciation of As.

The long-term stability of Fe-As coprecipitates, a typically hydrometallurgical or naturally produced As-bearing wastes in tailings or in other environments, is critical to evaluating the As risk caused by them. A wide pH range, different Fe/As molar ratios, reaction media, and neutralization reagents were considered in order to find the mechanisms controlling the fate of As during the 1640 days of transformation at 25 °C. The results indicated that at pH 4 and 12, As continuously released from the solid phase.

Robust Chiral Metal-Organic Framework Coatings for Self-Activating and Sustainable Biofouling Mitigation.

Surface coatings are designed to mitigate pervasive biofouling herald, a new era of surface protection in complex biological environments. However, existing strategies are plagued by persistent and recurrent biofilm attachment, despite the use of bactericidal agents. Herein, a chiral metal-organic framework (MOF)-based coating with conformal microstructures to enable a new anti-biofouling mode that involves spontaneous biofilm disassembly followed by bacterial eradication is developed.

The Galvanic Corrosion of AM60B Coupled with DC01 in Simulated Environments with Varying Water Salinity.

The galvanic corrosion performance of AM60B coupled to DC01 was characterized in simulated environments with varying water salinity. The results showed that the coupled DC01 effectively accelerated the corrosion rate of AM60B, and the increased salt concentration had a significant effect on the deterioration process. The corrosion of AM60B mainly exhibits metal dissolution, and the formed Mg(OH) has weak a protective effect on the alloy substrate.

Influence of Ultraviolet Light and Alternating Wet-Dry Environments on the Corrosion Behavior of Weathering Steels.

The corrosion behaviors of two bridge steels (Q345q and Q500q) under simulated ultraviolet irradiation and a wet-dry alternating (UVWD) environment were studied. Weight loss measurement, stereomicroscope observation, SEM, XRD, and electrochemical impedance spectroscopy (EIS) were performed to investigate the influence of the coupled environment. The results revealed that the corrosion rates of Q345q and Q500q were significantly accelerated by the synergistic effect of UV light exposure and alternating wet-dry conditions.

NAT10 Overexpression Promotes Tumorigenesis and Epithelial-Mesenchymal Transition Through AKT Pathway in Gastric Cancer.

Background: N-acetyltransferase 10 (NAT10), the only RNA cytosine acetyltransferase known in humans, contributes to cancer tumorigenesis and progression. This study aims to investigate the effect of NAT10 on the malignant biological properties of gastric cancer (GC) and its underlying mechanism.

Methods: The expression and prognostic significance of NAT10 in GC were analyzed using The Cancer Genome Atlas (TCGA) and Sun Yat-sen University (SYSU) cohorts.

Corrosive Pseudomonas aeruginosa detection by measuring pyocyanin with a lab-on-fiber optical surface plasmon resonance biosensor in aquatic environments.

Oceanic facilities and equipment corrosion present considerable economic and safety concerns, predominantly due to microbial corrosion. Early detection of corrosive microbes is pivotal for effective monitoring and prevention. Yet, traditional detection methods often lack specificity, require extensive processing time, and yield inaccurate results.

The role of a novel secretory peptidoglycan recognition protein with antibacterial ability from the Chinese Oak Silkworm Antheraea pernyi in humoral immunity.

Peptidoglycan recognition proteins (PGRPs) are a family of pattern recognition receptors that play a critical role in the immune response of invertebrates and vertebrates. Herein, the short ApPGRP-D gene was cloned from the model lepidopteran Antheraea pernyi. Quantitative PCR (qPCR) confirmed that ApPGRP-D is an immune-related protein and that the expression of ApPGRP-D can be induced by microorganisms.

Corrosion Behavior of Ni-Cr Alloys with Different Cr Contents in NaCl-KCl-MgCl.

This study investigates the corrosion behavior of Ni-Cr binary alloys, including Ni-10Cr, Ni-15Cr, Ni-20Cr, Ni-25Cr, and Ni-30Cr, in a NaCl-KCl-MgCl molten salt mixture through gravimetric analysis. Corrosion tests were conducted at 700 °C, with the maximum immersion time reaching up to 100 h. The corrosion rate was determined by measuring the mass loss of the specimens at various time intervals.

Preparation and High-Temperature Resistance Properties of Phenolic Resin/Phosphate Hybrid Coatings.

In this study, a novel fabrication method was used to synthesize phenolic resin/phosphate hybrid coatings using aluminum dihydrogen phosphate (Al(HPO), hereafter denoted as Al), SC101 silica sol (Si) as the primary film-forming agent, and phenolic resin (PF) as the organic matrix. This approach culminated in the formation of Al+Si+PF organo-inorganic hybrid coatings. Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results confirmed the successful integration of hybrid structures within these coatings.

Harnessing active biofilm for microbial corrosion protection of carbon steel against Geobacter sulfurreducens.

Microbiologically influenced corrosion (MIC) caused by corrosive microorganisms poses significant economic losses and safety hazards. Conventional corrosion prevention methods have limitations, so it is necessary to develop the eco-friendly and long-term effective strategies to mitigate MIC. This study investigated the inhibition of Vibrio sp.

Combatting cyanobacteria: unraveling the potency of 316L-Cu stainless steel in inhibiting Microcystis aeruginosa growth.

Harmful algal blooms, particularly those of Microcystis aeruginosa, present significant ecological and health risks. To address this issue, this study utilized a custom static algal growth assessment apparatus to investigate the anti-algal performance of a copper-alloyed 316L stainless steel (SS), named 316L-Cu SS. This material was compared with traditional 316L SS, which is widely utilized in freshwater systems for its corrosion resistance.

Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism.

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions.

The fate of arsenic during the crystallization process of Fe oxyhydroxides: Effect of reaction media, pH value, and Fe/As molar ratio under relatively low arsenic loading.

Understanding the nature of arsenic (As) adsorbed on Fe oxyhydroxides, and the subsequent behavior of As during the crystallization process, is critical to predicting its fate in a range of natural and engineered settings. In this work, As adsorbed on Fe oxyhydroxides formed in the different reaction media at different pH values were characterized with X-ray diffraction (XRD), Raman spectra, transmission electron microscopy (TEM), and extended X-ray absorption fine structure spectroscopy (EXAFS) to determine how As is redistributed during the crystallization process. Results showed that at pH 12, a quarter of the added As was still left in the liquid phase with the formation of goethite and hematite as the major and minor product.

Effect of Surface Activation on the Microstructure and Corrosion Resistance of MAO/Ni-P Composite Coating on AZ91D Magnesium Alloy.

The purpose of this study is to improve the number and distribution of active particles on the MAO layer by changing the activation method, thus improving the corrosion resistance of the coating. The structure of the coatings was characterized by SEM, XRD, XPS, and AFM, as well as the corrosion resistance of the coatings by polarization curves, EIS tests, immersion tests, and salt spray tests. The conductive resistance and adhesion of different composite coatings were compared.

Nuclear localization of TET2 requires β-catenin activation and correlates with favourable prognosis in colorectal cancer.

Mutation-induced malfunction of ten-eleven translocation methylcytosine dioxygenase 2 (TET2) is widely reported in haematological malignancies. However, the role of TET2 in solid cancers, including colorectal cancer (CRC), is unclear. Here, we found that TET2 malfunction in CRC is mostly due to decreased nuclear localization and that nuclear localization of TET2 is correlated with better survival of patients.

Accelerated Microbial Corrosion by Magnetite and Electrically Conductive Pili through Direct Fe -to-Microbe Electron Transfer.

Electrobiocorrosion, the process in which microbes extract electrons from metallic iron (Fe ) through direct Fe -microbe electrical connections, is thought to contribute to the costly corrosion of iron-containing metals that impacts many industries. However, electrobiocorrosion mechanisms are poorly understood. We report here that electrically conductive pili (e-pili) and the conductive mineral magnetite play an important role in the electron transfer between Fe and Geobacter sulfurreducens, the first microbe in which electrobiocorrosion has been rigorously documented.

Structure and Wear Performance of a Titanium Alloy by Using Low-Temperature Plasma Oxy-Nitriding.

To solve the problems of high nitriding temperature and long nitriding time with conventional plasma nitriding technologies, a kind of low-temperature plasma oxy-nitriding technology containing two-stage processes with different ratios of N to O was developed on a TC4 alloy in this paper. A thicker permeation coating can be obtained with this new technology compared to conventional plasma nitriding technology. The reason for this is that the oxygen introduction in the first two-hour oxy-nitriding step can break the continuous TiN layer, which facilitates the quick and deep diffusion of the solution-strengthening elements of O and N into the titanium alloy.

Multifunctional solvent molecule design enables high-voltage Li-ion batteries.

Elevating the charging cut-off voltage is one of the efficient approaches to boost the energy density of Li-ion batteries (LIBs). However, this method is limited by the occurrence of severe parasitic reactions at the electrolyte/electrode interfaces. Herein, to address this issue, we design a non-flammable fluorinated sulfonate electrolyte by multifunctional solvent molecule design, which enables the formation of an inorganic-rich cathode electrolyte interphase (CEI) on high-voltage cathodes and a hybrid organic/inorganic solid electrolyte interphase (SEI) on the graphite anode.

Enriched Peripheral Blood-Derived Mononuclear Cells for Treating Knee Osteoarthritis.

Osteoarthritis (OA) is a common chronic skeletal disease in the elderly. There is no effective therapy to reverse disease severity and knee OA (KOA) progression, particularly at the late stage. This study aims to examine the effect of peripheral blood-derived mononuclear cells (PBMNCs) on pain and motor function rescue in patients with Kellgren-Lawrence (KL) grade II to IV KOA.

Induction of type II collagen expression in M2 macrophages derived from peripheral blood mononuclear cells.

The human type II collagen (Col II), specifically expressed in chondrocytes, is a crucial component of the adult hyaline cartilage. We examine the potential of artificial induction of Col II in human peripheral blood mononuclear cells (PBMNCs) as a novel Col II provider. Human PBMNCs were purified and were treated with high doses of macrophage-colony stimulating factor (M-CSF), granulocyte macrophage-colony stimulating factor (GM-CSF), or granulocyte-colony stimulating factor (G-CSF) and examined the Col II expression at indicated days.

Single Dense Layer of PEO Coating on Aluminum Fabricated by "Chain-like" Discharges.

Reducing the loose-layer-to-dense-layer ratio in PEO coatings on aluminum and its alloys is the key to improving their corrosion resistance and expanding their applications in the aerospace industry and other fields. In this paper, we describe the discharge evolution during the PEO process in exhaustive detail and report the appearance of a novel "chain-like" discharge for the first time. We investigated the microstructure and composition of PEO coatings using a scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer (EDS) and an X-ray diffractometer (XRD).