Docetaxel-Loaded Chitosan-Cholesterol Conjugate-Based Self-Assembled Nanoparticles for Overcoming Multidrug Resistance in Cancer Cells.

Cholesteryl hemisuccinate (CHS)-conjugated chitosan (CS)-based self-assembled nanoparticles (NPs) were developed for enhancing the intracellular uptake of docetaxel in multidrug resistance (MDR)-acquired cancer cells. CHS-CS was successfully synthesized and self-aggregation, particle size, zeta potential, drug entrapment efficiency, and in vitro drug release of docetaxel-loaded CHS-CS NPs were tested. The optimized NPs had a mean hydrodynamic diameter of 303 nm, positive zeta potential of 21.

A Chitosan-Based Micellar System as Nanocarrier For the Delivery of Paclitaxel.

In this study, a redox-sensitive chitosan derivative with modifications by cholesterol, sulfhydryl, and mPEG (mPEG-CS(SH)-CHO) was successfully synthesized and characterized. Due to its amphiphilicity, the conjugate could spontaneously form micelles in an aqueous environment. The optimized paclitaxel (PTX)-loaded mPEG-CS(SH)-CHO micelles, with a mean diameter of 158 nm, zeta potential of +26.

Tumor-targeting micelles based on folic acid and α-tocopherol succinate conjugated hyaluronic acid for paclitaxel delivery.

Tumor-targeting micelles for the delivery of paclitaxel (PTX) were developed based on folic acid and α-tocopherol succinate conjugated hyaluronic acid (FA-HA-TOS). The conjugate FA-HA-TOS was synthesized by an esterification reaction and was characterized by proton nuclear magnetic resonance (H NMR) and Fourier transform infrared (FT-IR) analysis. The conjugate self-assembles into nanosized micelles in aqueous medium with a critical micellar concentration (CMC) of 1.

Amphiphilic Polymeric Micelles Based on Deoxycholic Acid and Folic Acid Modified Chitosan for the Delivery of Paclitaxel.

The present investigation aimed to develop a tumor-targeting drug delivery system for paclitaxel (PTX). The hydrophobic deoxycholic acid (DA) and active targeting ligand folic acid (FA) were used to modify water-soluble chitosan (CS). As an amphiphilic polymer, the conjugate FA-CS-DA was synthesized and characterized by Proton nuclear magnetic resonance (¹H-NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis.

Polymeric Micelles Based on Modified Glycol Chitosan for Paclitaxel Delivery: Preparation, Characterization and Evaluation.

Amphiphilic polymer of α-tocopherol succinate modified glycol chitosan (TS-GC) was successfully constructed by conjugating α-tocopherol succinate to the skeleton of glycol chitosan and characterized by Fourier-transform infrared (FT-IR) and proton nuclear magnetic resonance (¹H-NMR). In aqueous milieu, the conjugates self-assembled to micelles with the critical aggregation concentration of 7.2 × 10 mg/mL.

Multifunctional Composite Microcapsules for Oral Delivery of Insulin.

In this study, we designed and developed a new drug delivery system of multifunctional composite microcapsules for oral administration of insulin. Firstly, in order to enhance the encapsulation efficiency, insulin was complexed with functional sodium deoxycholate to form insulin-sodium deoxycholate complex using hydrophobic ion pairing method. Then the complex was encapsulated into poly(lactide--glycolide) (PLGA) nanoparticles by emulsion solvent diffusion method.

In vivo pharmacokinetics, biodistribution and antitumor effect of paclitaxel-loaded micelles based on α-tocopherol succinate-modified chitosan.

In our previous study, α-tocopherol succinate modified chitosan (CS-TOS) was synthesized and encapsulated paclitaxel (PTX) to form micelles. Preliminary study revealed that the CS-TOS was a potential micellar carrier for PTX. In this study, some further researches were done using Taxol formulation as the control to evaluate the micelle system deeply.

A pre-formulation study of a polymeric solid dispersion of paclitaxel prepared using a quasi-emulsion solvent diffusion method to improve the oral bioavailability in rats.

Objective: To preliminarily develop a surfactant-free, polymeric solid dispersion (PSD) of paclitaxel suitable for oral administration.

Methods: A co-solvent quench method was applied to screen the proper polymer matrix of the PSD which were prepared in a liquid system using a quasi-emulsion solvent diffusion method (QESDM). Three dissolution experiments and two in vivo tests in rats were used to explain the differences among the formulations.

pH-sensitive poly(lactide-co-glycolide) nanoparticle composite microcapsules for oral delivery of insulin.

This study proposes a new concept of pH-sensitive poly(lactide-co-glycolide) (PLGA) nanoparticle composite microcapsules for oral delivery of insulin. Firstly, insulin-sodium oleate complex was prepared by the hydrophobic ion pairing method and then encapsulated into PLGA nanoparticles by the emulsion solvent diffusion method. In order to reduce the burst release of insulin from PLGA nanoparticles and deliver insulin to specific gastrointestinal regions, hence to enhance bioavailability of insulin, the PLGA nanoparticles were further encapsulated into Eudragit(®) FS 30D to prepare PLGA nanoparticle composite microcapsules by organic spray-drying method.

Enhanced transport of nanocage stabilized pure nanodrug across intestinal epithelial barrier mimicking Listeria monocytogenes.

Ligand grafted nanoparticles have been shown to enhance drug transport across epithelium barrier and are expected to improve drug delivery. However, grafting of these ligands to the surface of pure nanodrug, i.e.

Epsilon-poly-L-lysine guided improving pulmonary delivery of supramolecular self-assembled insulin nanospheres.

This work presents new spherical nanoparticles that are fabricated from supramolecular self-assembly of therapeutic proteins for inhalation treatment. The formation involved self-assembly of insulin into nanospheres (INS) by a novel thermal induced phase separation method. Surface functional modification of INS with ɛ-poly-L-lysine (EPL), a homopolymerized cationic peptide, was followed to form a core-shell structure (INS@EPL).

Design of lipid matrix particles for fenofibrate: effect of polymorphism of glycerol monostearate on drug incorporation and release.

The effect of polymorphism of glycerol monostearate (GMS) on drug incorporation and release from lipid matrix particles (LMPs) was investigated using fenofibrate as a model drug. X-ray powder diffraction and differential scanning calorimetry were used to study the polymorphism change of GMS and the drug incorporation in GMS matrix. When medium-chain triglycerides (MCT) was absent, melted GMS was frozen to α-form of GMS with drug molecularly dispersed, whereas β-form of GMS was formed with part of drug crystallized out when the ratio of GMS/MCT in the lipid matrix was 2:1 (w/w).

[Self-assembly and in vitro and in vivo evaluation of spherical crystallized interferon for sustained delivery].

It is a challenging and important project to prolong the in vivo half life of protein and peptide drugs by physicochemical methods without new molecular entities generation. Protein crystallization provides a new strategy for improving the stability and in vivo delivery of these drugs. We show here that recombinant human interferon-alpha (rhIFN) can form spherical crystals.

Application of precipitation methods for the production of water-insoluble drug nanocrystals: production techniques and stability of nanocrystals.

This review focuses on using precipitation (bottom-up) method to produce water-insoluble drug nanocrystals, and the stability issues of nanocrystals. The precipitation techniques for production of ultra-fine particles have been widely researched for last few decades. In these techniques, precipitation of solute is achieved by addition of a non-solvent for solute called anti-solvent to decrease the solvent power for the solute dissolved in a solution.

Metal ions guided self-assembly of therapeutic proteins for controllable release: from random to ordered aggregation.

Purpose: To make a comparative study on sustained delivery performance of rhIFN with random amorphous and spherical crystal-like ordered self-assemblies.

Methods: The rhIFN self-assemblies were identified in batch crystallization mode. Physico-chemical characteristics were compared, including morphology, XRD, FTIR, CD, biological potency, the dissolution behaviors in vitro and plasma pharmacokinetics in vivo.

Polycationic peptide guided spherical ordered self-assembly of biomacromolecules.

Achieving effective controllable delivery of therapeutic biomacromolecules for long action without new molecular entities generation or carriers employed offers a promising alternative and significant clinical benefit. We show here that recombinant human interferon-alpha (rhIFN) can form a three dimensional ordered structure that is featured by spherical semi-crystalline through molecular self-assembly directed by a polycationic short peptide. The phase diagrams for self-assembly were constructed to identify the optimal regions for nucleation and ordered growth, and which were followed by the physico-chemical characterization of the ordered self-assemblies, including morphology, particle size, X-ray diffraction, circular dichroism and biological potency evaluations.

Development of an osmotically-driven pellet coated with acrylic copolymers (Eudragit® RS 30 D) for the sustained release of oxymatrine, a freely water soluble drug used to treat stress ulcers (I): in vitro and in vivo evaluation in rabbits.

Purpose: To develop an osmotically-driven pellet coated with polymeric film for sustained release of oxymatrine (OMT), a freely water soluble drug.

Methods: Pellet containing OMT and sodium chloride (NaCl), an osmotically active agent, were prepared by extrusion/spheronization and then coated with acrylic copolymers (Eudragit(®) RS 30 D) by the fluidized bed coating process. In vitro release and swelling behavior studies were employed to optimize and to evaluate the sustained-release behavior from the osmotically-driven pellets with film coated.

In vivo controlled release and prolonged antitumor effects of 2-methoxyestradiol solid lipid nanoparticles incorporated into a thermosensitive hydrogel.

A two-phase delivery system involving local injections of solid lipid nanoparticles (SLNs) -loaded hydrogel was developed using 2-methoxyestradiol as a model anticancer drug. This approach improves the effectiveness of conventional treatments for subcutaneous tumors and avoids that solid lipid nanoparticles are rapidly cleared from the circulation following systemic administration. The specific aim of the study presented in this article was to investigate the in vivo release, delivery and antitumor effects of 2-ME SLNs entrapped in a hydrogel.

A novel surface modified nitrendipine nanocrystals with enhancement of bioavailability and stability.

In this study, chitosan, a cationic polymer with positive charge, was introduced to modify the nanocrystals of nitrendipine with negative charge. The nanocrystals were prepared via precipitation-high pressure homogenization method. Then the nanocrystals were dispersed into chitosan solution, and the free chitosan was removed by centrifugation to obtain the chitosan modified nanocrystals, which remained the same particle size.

Solvent-mediated amorphous-to-crystalline transformation of nitrendipine in amorphous particle suspensions containing polymers.

The amorphous-to-crystalline transformation of nitrendipine was investigated using Raman spectroscopy and X-ray powder diffraction (XRPD). The nucleation and growth rate of crystalline nitrendipine in a medium containing poly (vinyl alcohol) (PVA) and polyethylene glycol (PEG 200) were quantitatively determined using image analysis based on polarized light microscopy. The findings from the image analysis revealed that the transformation process occurred through the dissolution of amorphous drug precipitate followed by the nucleation and growth of the crystalline phase with the amorphous precipitate acting as a reservoir for maintaining the supersaturation.

Investigation of a new injectable thermosensitive hydrogel loading solid lipid nanoparticles.

For improving the effectiveness of cancer chemotherapy and avoiding rapid clearance of solid lipid nonoparticles (SLN) from the systemic circulation following systemic administration, 2-methoxyestradiol (2-ME) as model drug, PLGA-PEG-PLGA as hydrogel material, an injectable SLN loaded hydrogel was developed. Integrity of SLN within and released from the hydrogel was confirmed by direct visualization by a scanning electron microscope (SEM), particle size measurement by laser light scattering, and free drug concentration in the release medium by ultracentrifugation. Moreover, in vitro release, thermo-sensitive properties and rheological behavior were investigated.

α-Tocopherol succinate-modified chitosan as a micellar delivery system for paclitaxel: preparation, characterization and in vitro/in vivo evaluations.

α-Tocopherol succinate hydrophobically modified chitosan (CS-TOS) containing 17 α-tocopherol groups per 100 anhydroglucose units was synthesized by coupling reaction. The formation of CS-TOS was confirmed by (1)H NMR and FT-IR analysis. In aqueous medium, the polymer could self-aggregate to form micelles, and the critical micelle concentration (CMC) was determined to be 5.

Hydrophobic ion pairing of an insulin-sodium deoxycholate complex for oral delivery of insulin.

Insulin was complexed with sodium deoxycholate to form an insulin-sodium deoxycholate complex (Ins-SD-Comp) using an hydrophobic ion pairing method in aqueous phase to enhance the liposolubility of insulin. In order to obtain the maximal complexation efficiency, the molar ratio of sodium deoxycholate to insulin was found. The zeta potential method was used to confirm the optimal ratio for formation of Ins-SD-Comp.

Preparation and cytotoxicity of 2-methoxyestradiol-loaded solid lipid nanoparticles.

The objective of this study was to prepare 2-methoxyestradiol (2-ME)-loaded solid lipid nanoparticles (SLN) by hot homogenization-ultrasonication and evaluate their cytotoxicity on three cell lines, breast cancer [Michigan Cancer Foundation-7 (MCF-7)], prostatic carcinoma (PC-3), and glioma (SK-N-SH), by the sulforhodamineB method. The particle sizes and zeta potentials of the prepared SLN were around 120 nm and -40 mV, respectively. Differential scanning calorimetry (DSC) measurements revealed that the monostearin and 2-ME existed in solid and amorphous states in the SLN prepared, respectively.