Structurally Transformable and Reconfigurable Hydrogel-Based Mechanical Metamaterials and Their Application in Biomedical Stents.

Mechanical metamaterials exhibit several unusual mechanical properties, such as a negative Poisson's ratio, which impart additional capabilities to materials. Recently, hydrogels have emerged as exceptional candidates for fabricating mechanical metamaterials that offer enhanced functionality and expanded applications due to their unique responsive characteristics. However, the adaptability of these metamaterials remains constrained and underutilized, as they lack integration of the hydrogels' soft and responsive characteristics with the metamaterial design.

Evolution of Oxygen Content of Graphene Oxide for Humidity Sensing.

Graphene oxide (GO) has shown significant potential in humidity sensing. It is well accepted that the oxygen-containing functional groups in GO significantly influence its humidity sensing performance. However, the relationship between the content of these groups and the humidity sensing capability of GO-based sensors remains unclear.

Sustainable Vat Photopolymerization-Based 3D-Printing through Dynamic Covalent Network Photopolymers.

Vat photopolymerization (VPP) based three-dimensional (3D) printing, including stereolithography (SLA) and digital light projection (DLP), is known for producing intricate, high-precision prototypes with superior mechanical properties. However, the challenge lies in the non-recyclability of covalently crosslinked thermosets used in these printing processes, limiting the sustainable utilization of printed prototypes. This review paper examines the recently explored avenue of VPP 3D-printed dynamic covalent network (DCN) polymers, which enable reversible crosslinks and allow for the reprocessing of printed prototypes, promoting sustainability.

4D-Printed Hydrogel Actuators through Diffusion-Path Architecture Design.

Recently, smart hydrogels have garnered considerable attention as biomedical devices, and several approaches have been introduced for their fabrication, including the incorporation of stimulus-responsive additives, utilization of molecular imprinting techniques, and application of multilayered hydrogels. However, the nonuniform properties resulting from these approaches limit the practical applications of hydrogels by causing inconsistent performance and behavior. In this study, we propose a novel approach to manipulating the swelling kinetics of hydrogels by engineering their diffusion-path architecture.

Enhancing the mechanical strength and toughness of epoxy resins with linear POSS nano-modifiers.

Glass transition temperature ( ) always deteriorates while improving the strength of epoxy resins which inherently suffer from brittleness. Herein, novel linear polyhedral oligomeric silsesquioxane (POSS)-epoxy nano-modifiers are synthesized with variable contents of POSS. The thermomechanical properties and chemical structure study of the POSS-epoxy indicates significant differences of the rigid POSS content in the linear nano-modifiers.

Toughened Hydrogels for 3D Printing of Soft Auxetic Structures.

Materials with negative Poisson's ratio have attracted considerable attention and offered high potential applications as biomedical devices due to their ability to expand in every direction when stretched. Although negative Poisson's ratio has been obtained in various base materials such as metals and polymers, there are very limited works on hydrogels due to their intrinsic brittleness. Herein, we report the use of methacrylated cellulose nanocrystals (CNCMAs) as a macro-cross-linking agent in poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels for 3D printing of auxetic structures.

Biomaterials by design: Harnessing data for future development.

Biomaterials is an interdisciplinary field of research to achieve desired biological responses from new materials, regardless of material type. There have been many exciting innovations in this discipline, but commercialization suffers from a lengthy discovery to product pipeline, with many failures along the way. Success can be greatly accelerated by harnessing machine learning techniques to comb through large amounts of data.

Machine Learning-Driven Biomaterials Evolution.

Biomaterials is an exciting and dynamic field, which uses a collection of diverse materials to achieve desired biological responses. While there is constant evolution and innovation in materials with time, biomaterials research has been hampered by the relatively long development period required. In recent years, driven by the need to accelerate materials development, the applications of machine learning in materials science has progressed in leaps and bounds.

Repair of Bone Defects With Endothelial Progenitor Cells and Bone Marrow-Derived Mesenchymal Stem Cells With Tissue-Engineered Bone in Rabbits.

Purpose: This study aimed to investigate the repair of bone defects in rabbits with tissue-engineered bones using cocultured endothelial progenitor cells (EPCs) and bone marrow mesenchymal stem cells (BMSCs) as seeding cells.

Methods: Endothelial progenitor cells and BMSCs were isolated and purified from the peripheral blood and bone marrow, respectively, of New Zealand rabbits. The third passage of BMSCs was cultured alone or with EPCs.

Star-Shaped Crosslinker for Multifunctional Shape Memory Polyurethane.

Star-shaped cyclophosphazene (ACP) was employed as covalent crosslinker to form a rigid segment in polyurethanes network, to enhance the mechanical performance and to add extra flame retardant property. The effects of different ACP contents on the shape memory ability and fire resistance performance of polyurethane (PU) were studied. Tensile tests suggested high flexibility of the PUs with the maximum elongation-at-break of 161.

Ultrasmall Designed Plasmon Resonators by Fused Colloidal Nanopatterning.

This work presents a procedure for large-area patterning of designed plasmon resonators that are much smaller than possible with conventional lithography techniques. Fused Colloidal Nanopatterning combines directed self-assembly and controlled fusing of spherical colloidal nanoparticles. The two-step approach first patterns a surface covered with hydrogen silsesquioxane, an electron beam resist, forming traps into which the colloidal gold nanoparticles self-assemble.

High-performance thermoelectric materials based on ternary TiO/CNT/PANI composites.

In the present work, we report the fabrication of high-performance thermoelectric materials using TiO2/CNT/PANI ternary composites. We showed that a conductivity of ∼2730 S cm-1 can be achieved for the binary CNT (70%)/PANI (30%) composite, which is the highest recorded value for the reported CNT/PANI composites. We further demonstrated that the Seebeck coefficient of CNT/PANI composites could be enhanced by incorporating TiO2 nanoparticles into the binary CNT/PANI composites, which could be attributed to lower carrier density and the energy scattering of low-energy carriers at the interfaces of TiO2/a-CNT and TiO2/PANI.

Tailoring the Diameters of Polyaniline Nanofibers for Sensor Application.

Size control has been successfully achieved in inorganic materials, but it still remains a challenge in organic polymers due to their polydispersity. We here report a facial approach to tailor the diameter of polyaniline (PANI) nanofibers in a range of 200-30 nm via temperature-controlled polymerization from room temperature to -192 °C. It is shown that the formation of PANI nanofibers was directed by the self-assembly of an amphiphilic aniline-glutamic acid complex, which formed micelles with different sizes at various temperatures during polymerization.

High-Performance Nano-Photoinitiators with Improved Safety for 3D Printing.

In this work, we report the first hybrid nanosized photoinitiators with low cytotoxicity and migration by coupling of polyhedral oligomeric silsesquioxanes (POSS) to benzophenone derivatives. This new series of photoinitiators were fully characterized and showed many favorable properties such as uniform sizes, extremely low tendency to migrate, less effect on resin viscosity, enhanced thermal stability and mechanical strength, increased photoactivity, and significantly lower cell toxicity compared to their corresponding benzophenone molecules. The utility of these hybrid nanosized photoinitiators in 3D printing was demonstrated in printing of various 3D structures with high resolution and accuracy.

Second order directed positioning of nanoparticles induced by the main terminal meniscus shape in irregular template cavities.

Directed self-assembly of nanoparticles using topographical templates has demonstrated great capabilities of ordering particles at their maximum packing fraction resulting from template confinement effects and free energy minimization. However, to self-assemble nanostructures at a lower packing fraction with a precise control over particle's positioning is challenging due to the high entropy of such a system. Here, by fabricating templates of irregular cavities together with appropriate choice of solvent, we demonstrate the positioning of 8 nm Au nanoparticles within individual cavities at a low filling factor.

Directed self-assembly of sub-10 nm particle clusters using topographical templates.

Directed self-assembly of nanoparticles (DSA-n) is an approach that creates suitable conditions to capture nanoparticles randomly dispersed in a liquid and position them into predefined locations on a solid template. Although DSA-n is emerging as a potential bottom-up patterning technique to build nanostructures using nanoparticles of various sizes, geometries and material compositions, there are still several outstanding challenges. In this paper, we focus on the DSA-n of sub-10 nm particles using topographical templates to guide them into 1D and 2D ordered arrays.

Regiospecific protonation of organic chromophores.

Highly conductive, acid doped polymers such as PEDOT/PSS and polyaniline (PANI) have attracted much attention due to their potential applications in flexible electronics. However, the understanding of the mechanism behind the doping process is still lacking. In this paper, we conduct a systematic and detailed investigation on the acid doping behaviors of four model compounds which were synthesized by combining different protonatable units such as pyridal[2,1,3]thiadiazole (PT), benzo[2,1,3]thiadiazole (BT), cyclopentadithiophene (CPDT), and azulene.

Highly Sensitive and Fast Response Colorimetric Humidity Sensors Based on Graphene Oxides Film.

Uniform graphene oxide (GO) film for optical humidity sensing was fabricated by dip-coating technique. The resulting GO thin film shows linear optical shifts in the visible range with increase of humidity in the whole relative humidity range (from dry state to 98%). Moreover, GO films exhibit ultrafast sensing to moisture within 250 ms because of the unique atomic thinness and superpermeability of GO sheets.

A new aspect of cyclopentadithiophene based polymers: narrow band gap polymers upon protonation.

A new aspect of cyclopentadithiophene (CPDT) based conjugated polymers was reported. CPDT units in conjugated polymers can be facilely protonated with a significant change in optical and electronic properties. The protonation was confirmed by NMR spectra studies and the remarkable decrease of the energy band-gap was attributed to charge separation upon protonation.

Origin of Near-Infrared Absorption for Azulene-Containing Conjugated Polymers upon Protonation or Oxidation.

A series of azulene-containing conjugated polymers were studied to elucidate their tunable absorption properties in near-infrared (NIR) regions (i.e., 1.

Protonation induced shifting of electron-accepting centers in intramolecular charge transfer chromophores: a theoretical study.

A new series of chameleonic molecules containing azulene and benzothiadiazole (BT) were designed and synthesized. In the neutral state, BT functions as an electron accepting center, while upon protonation, the electron accepting center shifts to azulene moieties, leading to a remarkable extension of absorption to the NIR region, i.e.

Near-infrared responsive conjugated polymers to 1.5 μm and beyond: synthesis and electrochromic switching application.

Azulene-containing conjugated polymers with near-infrared absorption up to 1.5 μm and beyond are achieved by treating with trifluoroacetic acid (TFA). Density functional theory calculations reveal that the near-infrared absorption arises from a strong intramolecular charge transfer transition on the polymer backbone, and the near-infrared absorption can be tuned by the degree of protonation.

Coculture of vascular endothelial cells and adipose-derived stem cells as a source for bone engineering.

The interaction between vascular endothelial cells (VECs) and osteoblasts (OBs) is the focus of this recent research. Vascular endothelial cells secrete bone morphogenetic protein, which promotes OB differentiation and stimulates OBs and their precursor cells to secrete vascular endothelial growth factor. Vascular endothelial growth factor is important in angiogenesis and angiopoiesis.