Applications and accuracy of 3D-printed surgical guides in traumatology and orthopaedic surgery: A systematic review and meta-analysis.

Background: Patient-Specific Surgical Guides (PSSGs) are advocated for reducing radiation exposure, operation time and enhancing precision in surgery. However, existing accuracy assessments are limited to specific surgeries, leaving uncertainties about variations in accuracy across different anatomical sites, three-dimensional (3D) printing technologies and manufacturers (traditional vs. printed at the point of care).

Standardized multi-planar reformation improves the reliability of the assessment of the anterolateral ligament in ACL-deficient knees.

Purpose: The anterolateral ligament (ALL) is an important structure for controlling anterolateral rotatory stability of the knee. Its assessment, however, is difficult using standardized MRI images. The goal of this study was to assess the reliability of judging the integrity of the ALL on multi-planar reformatted (MPR) MRI images and on standard coronal reformatted (SCR) MRI images in knees with an anterior cruciate ligament (ACL) rupture.

Treatment of Knee Dislocation With Primary Repair and Suture Augmentation: A Viable Solution.

Background: Different surgical techniques have been described for the treatment of knee dislocation (KD). Nonoperative approaches are frequently combined with surgical reconstruction using auto- or allograft.

Purpose: To evaluate the midterm results of primary surgical repair and suture augmentation to treat KD.

Staged treatment of a comminuted femoral fracture with Masquelet technique and 3D printed reposition guides.

Background: Comminuted femoral fractures pose a challenge to the trauma surgeon due to the absence of bony references during surgery. Therefore, malalignment of length and axis can occur and necessitate revision surgery. During the last decade, 3D-planning has evolved as a surgical aid in difficult cases.

Quantitative determination of the femoral offset templating error in total hip arthroplasty using a new geometric model.

Aims: Traditionally, total hip arthroplasty (THA) templating has been performed on anteroposterior (AP) pelvis radiographs. Recently, additional AP hip radiographs have been recommended for accurate measurement of the femoral offset (FO). To verify this claim, this study aimed to establish quantitative data of the measurement error of the FO in relation to leg position and X-ray source position using a newly developed geometric model and clinical data.

3D printed fracture reduction guides planned and printed at the point of care show high accuracy - a porcine feasibility study.

Purpose: After surgical treatment of comminuted diaphyseal femoral and tibial fractures, relevant malalignment, especially rotational errors occur in up to 40-50%. This either results in a poor clinical outcome or requires revision surgery. This study aims to evaluate the accuracy of reduction if surgery is supported by 3D guides planned and printed at the point of care.

Indications, clinical outcome and survival of rotating hinge total knee arthroplasty in a retrospective study of 63 primary and revision cases.

Purpose: The purpose of this study is to report and compare outcome data of both primary and revision cases using a rotating hinge knee (RHK) implant.

Methods: This study retrospectively analyzed 63 cases (19 primary, 44 revisions) at a mean follow-up of 34 ± 8 months after RHK implantation. Outcome parameters were stability, range of motion (ROM), loosening, Hospital of Special Surgery Score (HSS), Knee Society Score (KSS), Oxford Knee Score (OKS), EQ-5D-3L, and Visual Analog Scale (VAS) for overall function.

Collagen wrapping and local platelet-rich fibrin do not improve the survival rates of ACL repair with dynamic intraligamentary stabilization: a retrospective case series after ≥5 years postoperatively.

Purpose: Anterior cruciate ligament (ACL) repair has been recommended as a treatment principle for ACL tears. Several authors have advocated a potential role for primary repair techniques in the ACL decision tree. However, long-term results have been controversial.

Survival, functional outcome and satisfaction of first revision total knee arthroplasty at a mean eleven-year follow-up.

Purpose: Providing long-term outcome data after rTKA and compare one- versus two-stage and septic versus aseptic revisions.

Methods: This study represents a single-center retrospective study of first rTKAs performed for any reason with a final follow-up of a minimum of five years. Outcome parameters included stability assessment ROM, radiologic assessment, HSS score, KSS score, OKS score, EQ-5D-3L and VAS.

Multiplanar reformation improves identification of the anterolateral ligament with MRI of the knee.

The anterolateral ligament (ALL) is subject of the current debate concerning rotational stability in case of anterior cruciate ligament (ACL) injuries. Today, reliable anatomical and biomechanical evidence for its existence and course is available. Some radiologic studies claim to be able to identify the ALL on standard coronal plane MRI sections.

The EOS 3D imaging system reliably measures posterior tibial slope.

Background: One of the values determined during the assessment of knee issues is the posterior tibial slope (PTS). A new option for measuring the PTS is the EOS 3D imaging system, which provides anteroposterior (AP) and lateral long leg radiographs (LLRs) using less radiation than a conventional LLR. We investigated the reliability of the EOS 3D imaging system with respect to PTS measurements.

Avoiding unconscious injection of vial-derived rubber particles during intra-articular drug administration.

Objective: Vial coring describes the occurrence of small rubber particles, which are formed by needles when perforating vial stoppers. These particles may be aspirated along with the drug. Unconscious injection of rubber particles may increase the risks associated with intra-articular injections.

Prevalence of combined abnormalities of tibial and femoral torsion in patients with symptomatic hip dysplasia and femoroacetabular impingement.

Aims: The prevalence of combined abnormalities of femoral torsion (FT) and tibial torsion (TT) is unknown in patients with femoroacetabular impingement (FAI) and hip dysplasia. This study aimed to determine the prevalence of combined abnormalities of FT and TT, and which subgroups are associated with combined abnormalities of FT and TT.

Methods: We retrospectively evaluated symptomatic patients with FAI or hip dysplasia with CT scans performed between September 2011 and September 2016.

Seventy percent long-term survival of the repaired ACL after dynamic intraligamentary stabilization.

Purpose: Primary repair of the anterior cruciate ligament (ACL) is regaining popularity. Long-term results are lacking. The purpose of the current study was to determine the survival of the primarily repaired ACL after dynamic intraligamentary stabilization.

Application of Cytokines of the Bone Morphogenetic Protein (BMP) Family in Spinal Fusion - Effects on the Bone, Intervertebral Disc and Mesenchymal Stromal Cells.

Low back pain is a prevalent socio-economic burden and is often associated with damaged or degenerated intervertebral discs (IVDs). When conservative therapy fails, removal of the IVD (discectomy), followed by intersomatic spinal fusion, is currently the standard practice in clinics. The remaining space is filled with an intersomatic device (cage) and with bone substitutes to achieve disc height compensation and bone fusion.

Extra-abdominal desmoid tumours - further evidence for the watchful waiting policy.

Purpose: Extra-abdominal desmoid tumours are benign and rare, and lead to a persistent treatment dilemma because of their high recurrence rate and their heterogeneous behaviour. The goal of this retrospective study was to evaluate the results of different treatment modalities for extra-abdominal desmoid tumours at four sarcoma treatment centres.

Methods: The mean follow-up time for the 96 patients included in the study (63.

The pararectus approach-a versatile option in pelvic musculoskeletal tumor surgery.

Background: Pelvic tumors are usually resected through the utilitarian pelvic incision, an extended ilioinguinal/iliofemoral approach. The pararectus approach, an intrapelvic anatomical approach with extraperitoneal access to the pelvis, has been established previously for the treatment of pelvic and acetabular fractures. However, it has not been used to address pelvic tumors.

Obesity and smoking predict the results of two-stage exchange in septic revision hip arthroplasty: A cohort study.

Background: Prosthetic joint infection (PJI) is deemed to be the most serious complication following total hip arthroplasty. Obesity and smoking are known risk factors for PJI. However, the influence of these variables on infection free survival, of septic revision hip arthroplasty, is yet to be explored.

Ultrasonic cartilage thickness measurement is accurate, reproducible, and reliable-validation study using contrast-enhanced micro-CT.

Background: Ultrasonography is a fast and patient-friendly modality to assess cartilage thickness. However, inconsistent results regarding accuracy have been reported. Therefore, we asked what are (1) the accuracy, (2) reproducibility, and (3) reliability of ultrasonographic cartilage thickness measurement using contrast-enhanced micro-CT for validation?

Methods: A series of 50 cartilage-bone plugs were harvested from fresh bovine and porcine joints.

The Ganz acetabular reinforcement ring shows excellent long-term results when used as a primary implant: a retrospective analysis of two hundred and forty primary total hip arthroplasties with a minimum follow-up of twenty years.

Purpose: The acetabular reinforcement ring with a hook (ARRH) has been designed for acetabular total hip arthroplasty (THA) revision. Additionally, the ARRH offers several advantages when used as a primary implant especially in cases with altered acetabular morphology. The implant facilitates anatomic positioning by placing the hook around the teardrop and provides a homogenous base for cementing the polyethylene cup.

Correction to: Reconstruction of AAOS type III and IV acetabular defects with the Ganz reinforcement ring: high failure in pelvic discontinuity.

The author would like to correct the errors in the publication of the original article. The corrected details are given below for your reading.

Reconstruction of AAOS type III and IV acetabular defects with the Ganz reinforcement ring: high failure in pelvic discontinuity.

Background: Large acetabular defects and pelvic discontinuity represent complex problems in revision total hip arthroplasty. This study aimed to investigate whether reconstruction with the Ganz reinforcement ring would provide durable function in large acetabular defects.

Patients And Methods: 46 hips (45 patients, 19 male, 26 female, mean age 68 years) with AAOS type III and IV defects undergoing acetabular revision with the Ganz reinforcement ring were evaluated at a mean follow-up of 74 months (24-161 months).

Pleomorphic rhabdomyosarcoma with an impressive response to chemotherapy: case report and review of the literature.

Purpose: Pleomorphic rhabdomyosarcoma (RMS) represents a rare sarcoma subtype of the adult population. Due to its clinical characteristics, treatment is currently based on the guidelines for adult soft tissue sarcoma therapy. Hence, in the metastatic setting, doxorubicin-containing regimens are used in the sarcoma community, with limited treatment benefit.

Management of pelvic discontinuity in revision total hip arthroplasty: a review of the literature.

Pelvic discontinuity is a complex problem in revision total hip arthroplasty. Although rare, the incidence is likely to increase due to the ageing population and the increasing number of total hip arthroplasties being performed. The various surgical options available to solve this problem include plating, massive allografts, reconstruction rings, custom triflanged components and tantalum implants.