Structural, Magnetic, and Dielectric Properties of Laser-Ablated CoFeO/BaTiO Bilayers Deposited over Highly Doped Si(100).

Laser ablation was used to successfully fabricate multiferroic bilayer thin films, composed of BaTiO (BTO) and CoFeO (CFO), on highly doped (100) Si substrates. This study investigates the influence of BaTiO layer thickness (50-220 nm) on the films' structural, magnetic, and dielectric properties. The dense, polycrystalline films exhibited a tetragonal BaTiO phase and a cubic spinel CoFeO layer.

Direct observation of twisted stacking domains in the van der Waals magnet CrI.

Van der Waals (vdW) stacking is a powerful technique to achieve desired properties in condensed matter systems through layer-by-layer crystal engineering. A remarkable example is the control over the twist angle between artificially-stacked vdW crystals, enabling the realization of unconventional phenomena in moiré structures ranging from superconductivity to strongly correlated magnetism. Here, we report the appearance of unusual 120° twisted faults in vdW magnet CrI crystals.

In Situ Observations Reveal the Five-fold Twin-Involved Growth of Gold Nanorods by Particle Attachment.

Crystallization plays a critical role in determining crystal size, purity and morphology. Therefore, uncovering the growth dynamics of nanoparticles (NPs) atomically is important for the controllable fabrication of nanocrystals with desired geometry and properties. Herein, we conducted in situ atomic-scale observations on the growth of Au nanorods (NRs) by particle attachment within an aberration-corrected transmission electron microscope (AC-TEM).

Atomic structure and large magnetic anisotropy in air-sensitive layered ferromagnetic VI.

We report the air-sensitivity, atomic structure, and magnetic anisotropy of VI single crystals. We find that VI nanocrystals exhibit a large / ratio of around 0.75 and a uniaxial anisotropic constant of an order of 10 erg cc below the Curie temperature.

Kinetic Observations on Crystal Nucleation and Growth.

Nucleation and growth are critical steps in crystallization, which plays an important role in determining crystal structure, size, morphology, and purity. Therefore, understanding the mechanisms of nucleation and growth is crucial to realize the controllable fabrication of crystalline products with desired and reproducible properties. Based on classical models, the initial crystal nucleus is formed by the spontaneous aggregation of ions, atoms, or molecules, and crystal growth is dependent on the monomer's diffusion and the surface reaction.

Optoelectronics of Atomic Metal-Semiconductor Interfaces in Tin-Intercalated MoS.

Metal-semiconductor interfaces are ubiquitous in modern electronics. These quantum-confined interfaces allow for the formation of atomically thin polarizable metals and feature rich optical and optoelectronic phenomena, including plasmon-induced hot-electron transfer from metal to semiconductors. Here, we report on the metal-semiconductor interface formed during the intercalation of zero-valent atomic layers of tin (Sn) between layers of MoS, a van der Waals layered material.

Doxorubicin delivery performance of superparamagnetic carbon multi-core shell nanoparticles: pH dependence, stability and kinetic insight.

In the past decade, magnetic nanoparticles (MNPs) have been among the most attractive nanomaterials used in different fields, such as environmental and biomedical applications. The possibility of designing nanoparticles with different functionalities allows for advancing the biomedical applications of these materials. Additionally, the magnetic characteristics of the nanoparticles enable the use of magnetic fields to drive the nanoparticles to the desired sites of delivery.

Atomic-Scale Interface Modification Improves the Performance of Cu(InGa)Se/Zn(O,S) Heterojunction Solar Cells.

Cadmium-free buffer layers deposited by a dry vacuum process are mandatory for low-cost and environmentally friendly Cu(InGa)Se (CIGS) photovoltaic in-line production. Zn(O,S) has been identified as an alternative to the chemical bath deposited CdS buffer layer, providing comparable power conversion efficiencies. Recently, a significant efficiency enhancement has been reported for sputtered Zn(O,S) buffers after an annealing treatment of the complete solar cell stack; the enhancement was attributed to interdiffusion at the CIGS/Zn(O,S) interface, resulting in wide-gap ZnSO islands formation and reduced interface defects.

Sustainable existence of solid mercury (Hg) nanoparticles at room temperature and their applications.

Although liquid mercury (Hg) has been known since antiquity, the formation of stable solid nano forms of Hg at room temperature has not been reported so far. Here, for the first time, we report a simple sonochemical route to obtain solid mercury nanoparticles, stabilized by reduced graphene oxide at ambient conditions. The as-formed solid Hg nanoparticles were found to exhibit remarkable rhombohedral morphology and crystallinity at room temperature.

Morphology-Tunable Synthesis of Intrinsic Room-Temperature Ferromagnetic γ-FeO Nanoflakes.

Intrinsic two-dimensional (2D) magnetic materials with room-temperature ferromagnetism and air stability are highly desirable for spintronic applications. However, the experimental observations of such 2D or ultrathin ferromagnetic materials are rarely reported owing to the scarcity of these materials in nature and for the intricacy in their synthesis. Here, we report a successful controllable growth of ultrathin γ-FeO nanoflakes with a variety of morphologies tunable by the growth temperature alone using a facile chemical vapor deposition method and demonstrate that all ultrathin nanoflakes still show intrinsic room-temperature ferromagnetism and a semiconducting nature.

Enhancing Light-Matter Interactions in MoS by Copper Intercalation.

The intercalation of layered compounds opens up a vast space of new host-guest hybrids, providing new routes for tuning the properties of materials. Here, it is shown that uniform and continuous layers of copper can be intercalated within the van der Waals gap of bulk MoS resulting in a unique Cu-MoS hybrid. The new Cu-MoS hybrid, which remains semiconducting, possesses a unique plasmon resonance at an energy of ≈1eV, giving rise to enhanced optoelectronic activity.

Functionalized magnetic composite nano/microfibres with highly oriented van der Waals CrI inclusions by electrospinning.

This study reports on the synthesis of highly oriented chromium triiodide (CrI) magnetic inclusions inside nano/microfibres with a polyethylene oxide matrix, prepared by the electrospinning technique. The structural, microstructural and spectroscopic analysis shows uniformly dispersed CrI nanosized inclusions inside the fibres, presenting a C2/m monoclinic structure at room temperature, where their c-axis is perpendicular to the fibre mat plane and the ab layers are in-plane. Analysis of the magnetic properties show that the samples have a ferromagnetic-paramagnetic phase transition at ∼55-56 K, lower than that of bulk CrI.

Micro-sized thin-film solar cells via area-selective electrochemical deposition for concentrator photovoltaics application.

Micro-concentrator solar cells enable higher power conversion efficiencies and material savings when compared to large-area non-concentrated solar cells. In this study, we use materials-efficient area-selective electrodeposition of the metallic elements, coupled with selenium reactive annealing, to form Cu(In,Ga)Se semiconductor absorber layers in patterned microelectrode arrays. This process achieves significant material savings of the low-abundance elements.

Synthesis and characterization of quaternary La(Sr)S-TaS misfit-layered nanotubes.

Misfit-layered compounds (MLCs) are formed by the combination of different lattices and exhibit intriguing structural and morphological characteristics. MLC Sr La S-TaS nanotubes with varying Sr composition (10, 20, 40, and 60 Sr atom %, corresponding to = 0.1, 0.

In Situ Atomic-Scale Observation of Kinetic Pathways of Sublimation in Silver Nanoparticles.

Uncovering kinetics of sublimation atomically is critical to understanding both natural phenomena and advanced manufacturing technologies. Here, direct in situ atomic-scale observations to understand the effects of size, surface, and defects in the sublimation process of supported silver nanoparticles upon heating within an aberration-corrected transmission electron microscopy are conducted. Atomic-scale evidence to sublimation and atomic rearrangement in small Ag nanoparticles during heating is provided, and it is demonstrated that the sublimation-induced stable surfaces in the particles with a size smaller than ≈30 nm are {111} and {100} planes.

Toward the use of CVD-grown MoS nanosheets as field-emission source.

Densely populated edge-terminated vertically aligned two-dimensional MoS nanosheets (NSs) with thicknesses ranging from 5 to 20 nm were directly synthesized on Mo films deposited on SiO by sulfurization. The quality of the obtained NSs was analyzed by scanning electron and transmission electron microscopy, and Raman and X-ray photoelectron spectroscopy. The as-grown NSs were then successfully transferred to the substrates using a wet chemical etching method.

Single Walled BiI Nanotubes Encapsulated within Carbon Nanotubes.

Inorganic nanotubes are morphological counterparts of carbon nanotubes (CNTs). Yet, only graphene-like BN layer has been readily organized into single walled nanotubes so far. In this study, we present a simple route to obtain inorganic single walled nanotubes - a novel ultrathin morphology for bismuth iodide (BiI), embedded within CNTs.

In Situ Atomic-Scale Study of Particle-Mediated Nucleation and Growth in Amorphous Bismuth to Nanocrystal Phase Transformation.

Understanding classical and nonclassical mechanisms of crystal nucleation and growth at the atomic scale is of great interest to scientists in many disciplines. However, fulfilling direct atomic-scale observation still poses a significant challenge. Here, by taking a thin amorphous bismuth (Bi) metal nanosheet as a model system, direct atomic resolution of the crystal nucleation and growth initiated from an amorphous state of Bi metal under electron beam inside an aberration-corrected transmission electron microscope is provided.

Direct Atomic-Scale Observation of Intermediate Pathways of Melting and Crystallization in Supported Bi Nanoparticles.

Uncovering the evolutional pathways of melting and crystallization atomically is critical to understanding complex microscopic mechanism of first-order phase transformation. We conduct in situ atomic-scale observations of melting and crystallization in supported Bi nanoparticles under heating and cooling within an aberration-corrected TEM. We provide direct evidence of the multiple intermediate state events in melting and crystallization.

Discussion about the use of the volume specific surface area (VSSA) as a criterion to identify nanomaterials according to the EU definition. Part two: experimental approach.

The first part of this study was dedicated to the modelling of the influence of particle shape, porosity and particle size distribution on the volume specific surface area (VSSA) values in order to check the applicability of this concept to the identification of nanomaterials according to the European Commission Recommendation. In this second part, experimental VSSA values are obtained for various samples from nitrogen adsorption isotherms and these values were used as a screening tool to identify and classify nanomaterials. These identification results are compared to the identification based on the 50% of particles with a size below 100 nm criterion applied to the experimental particle size distributions obtained by analysis of electron microscopy images on the same materials.

In Situ Atomic-Scale Observation of Droplet Coalescence Driven Nucleation and Growth at Liquid/Solid Interfaces.

Unraveling dynamical processes of liquid droplets at liquid/solid interfaces and the interfacial ordering is critical to understanding solidification, liquid-phase epitaxial growth, wetting, liquid-phase joining, crystal growth, and lubrication processes, all of which are linked to different important applications in material science. In this work, we observe direct in situ atomic-scale behavior of Bi droplets segregated on SrBiTaO by using aberration-corrected transmission electron microscopy and demonstrate ordered interface and surface structures for the droplets on the oxide at the atomic scale and unravel a nucleation mechanism involving droplet coalescence at the liquid/solid interface. We identify a critical diameter of the formed nanocrystal in stabilizing the crystalline phase and reveal lattice-induced fast crystallization of the droplet at the initial stage of the coalescence of the nanocrystal with the droplet.

From Chromonic Self-Assembly to Hollow Carbon Nanofibers: Efficient Materials in Supercapacitor and Vapor-Sensing Applications.

Carbon nanofibers (CNFs) with high surface area (820 m/g) have been successfully prepared by a nanocasting approach using silica nanofibers obtained from chromonic liquid crystals as a template. CNFs with randomly oriented graphitic layers show outstanding electrochemical supercapacitance performance, exhibiting a specific capacitance of 327 F/g at a scan rate of 5 mV/s with a long life-cycling capability. Approximately 95% capacitance retention is observed after 1000 charge-discharge cycles.

Structural and chemical analysis of gadolinium halides encapsulated within WS2 nanotubes.

The hollow cavities of nanotubes serve as templates for the growth of size- and shape-confined functional nanostructures, giving rise to novel materials and properties. In this work, considering their potential application as MRI contrast agents, gadolinium halides are encapsulated within the hollow cavities of WS2 nanotubes by capillary filling to obtain GdX3@WS2 nanotubes (where X = Cl, Br or I and @ means encapsulated in). Aberration corrected scanning/transmission electron microscopy (S/TEM) and spectroscopy is employed to understand the morphology and composition of the GdI3@WS2 nanotubes.

Structural changes of electron and ion beam-deposited contacts in annealed carbon-based electrical devices.

The use of electron and ion beam deposition to make devices containing discrete nanostructures as interconnectors is a well-known nanofabrication process. Classically, one-dimensional materials such as carbon nanotubes (CNTs) have been electrically characterized by resorting to these beam deposition methods. While much attention has been given to the interconnectors, less is known about the contacting electrodes (or leads).

Controlling Bimetallic Nanostructures by the Microemulsion Method with Subnanometer Resolution Using a Prediction Model.

We present a theoretical model to predict the atomic structure of Au/Pt nanoparticles synthesized in microemulsions. Excellent concordance with the experimental results shows that the structure of the nanoparticles can be controlled at subnanometer resolution simply by changing the reactant concentration. The results of this study not only offer a better understanding of the complex mechanisms governing reactions in microemulsions, but open up a simple new way to synthesize bimetallic nanoparticles with ad hoc controlled nanostructures.