Cisplatin-functionalized dual-functional bone substitute granules for bone defect treatment after bone tumor resection.

Invasive bone tumors pose a significant healthcare challenge, often requiring systemic chemotherapy and limb salvage surgery. However, these strategies are hampered by severe side effects, complex post-resection bone defects, and high local recurrence rates. To address this, we developed dual-functional bone substitute biomaterials by functionalizing commercially available bone substitute granules (Bio-Oss® and MBCP®+) with the established anticancer agent cisplatin.

Absolute and Relative Reliability of Spatiotemporal Gait Characteristics Extracted from an Inertial Measurement Unit among Senior Adults Using a Passive Hip Exoskeleton: A Test-Retest Study.

Background: Seniors wearing a passive hip exoskeleton (Exo) show increased walking speed and step length but reduced cadence. We assessed the test-retest reliability of seniors' gait characteristics with Exo.

Methods: Twenty seniors walked with and without Exo (noExo) on a 10 m indoor track over two sessions separated by one week.

Walking against the odds: The intricate connection between spatiotemporal characteristics, kinetic and kinematic variables, cognitive stress, and passive assistive exoskeletons in senior and young adults.

In this study, we investigated the combined effects of age, dual-tasking (DT) and a passive hip exoskeleton on gait patterns among senior (SA) and young adults (YA). It was hypothesized that SA will be more affected by DT and that wearing the exoskeleton will improve gait patterns for both groups during DT. Twenty-two SA and twenty-six YA performed a single task (normal walking) and DT walking at their preferred speed with an exoskeleton (EXO), without (noEXO), and a sham version (SHAM) in a randomized and balanced order.

Effect of Lipids on Diabetic Retinopathy in a Large Cohort of Diabetic Patients after 10 Years of Follow-Up.

(1) Background: Diabetic retinopathy (DR) remains the leading cause of low vision and blindness in young adults of working age. Although the most important risk factors-such as the duration of diabetes mellitus (DM) and glycemic control measured by HbA1c-are known, the effects of lipids are not as clear. The aim of the present study is to analyze the effects of lipids on the development of DR.

Osteogenic differentiation of adipose-derived canine mesenchymal stem cells seeded in porous calcium-phosphate scaffolds.

Introduction: Engineered bone graft substitutes are a promising alternative and supplement to autologous bone grafts as treatments for bone healing impairment. Advances in human medicine extend an invitation to pursue these biomimetic strategies in animal patients, substantiated by the theory that specialized scaffolds, multipotent cells, and biological cues may be combined into a bioactive implant intended for the enhancement of tissue regeneration.

Methods: This proof-of-concept study was designed to evaluate and validate the feasibility of beta-tricalcium phosphate foam scaffolds seeded with canine mesenchymal stem cells derived from adipose tissue.

Nutritional ecology of European rabbit (Oryctolagus cuniculus): Factors affecting chemical composition of gastric content.

Nutritional ecology seeks to unravel the extensive web of nutritional links that directs animals in their interactions with their ecological and social environments. European rabbit (Oryctolagus cuniculus) populations its endemic locations are declining and it is considered a keystone species of the Mediterranean ecosystem prompteing the interest in its conservation. The main aim of this study was to determine the nutritional composition of the diet of European rabbits through the relative and absolute chemical composition of the gastric content.

3D printing with star-shaped strands: A new approach to enhance in vivo bone regeneration.

Concave surfaces have shown to promote bone regeneration in vivo. However, bone scaffolds obtained by direct ink writing, one of the most promising approaches for the fabrication of personalized bone grafts, consist mostly of convex surfaces, since they are obtained by microextrusion of cylindrical strands. By modifying the geometry of the nozzle, it is possible to print 3D structures composed of non-cylindrical strands and favor the presence of concave surfaces.

Carbon Plate Shoes Improve Metabolic Power and Performance in Recreational Runners.

This study compared metabolic power (MP) and time trial (TT) running performance between Adidas Adizero Adios (AAA) and Nike VaporFly 4% (NVP). Thirty-seven runners completed three laboratory sessions and two field sessions (n=30). After familiarization (visit 1), participants completed eight 6-min treadmill running bouts (four with each shoe, counterbalanced) at their preferred pace, and MP was assessed using indirect calorimetry (visits 2 and 3).

On-Growth and In-Growth Osseointegration Enhancement in PM Porous Ti-Scaffolds by Two Different Bioactivation Strategies: Alkali Thermochemical Treatment and RGD Peptide Coating.

A lack of primary stability and osteointegration in metallic implants may result in implant loosening and failure. Adding porosity to metallic implants reduces the stress shielding effect and improves implant performance, allowing the surrounding bone tissue to grow into the scaffold. However, a bioactive surface is needed to stimulate implant osteointegration and improve mechanical stability.

H-magnetic resonance spectroscopy lipoprotein profile in patients with chronic heart failure versus matched controls.

Introduction And Objectives: Advanced lipoprotein phenotyping is a better predictor of atherosclerotic cardiovascular risk than cholesterol concentration alone. Lipoprotein profiling in heart failure (HF) is incompletely characterized. We aimed to describe the lipoprotein profile in patients with chronic HF compared with a matched control population.

Hydrothermal processing of 3D-printed calcium phosphate scaffolds enhances bone formation in vivo: a comparison with biomimetic treatment.

Hydrothermal (H) processes accelerate the hydrolysis reaction of α-tricalcium phosphate (α-TCP) compared to the long-established biomimetic (B) treatments. They are of special interest for patient-specific 3D-printed bone graft substitutes, where the manufacturing time represents a critical constraint. Altering the reaction conditions has implications for the physicochemical properties of the reaction product.

Multiple-day high-dose beetroot juice supplementation does not improve pulmonary or muscle deoxygenation kinetics of well-trained cyclists in normoxia and hypoxia.

Dietary nitrate (NO) supplementation via beetroot juice (BR) has been reported to lower oxygen cost (i.e., increased exercise efficiency) and speed up oxygen uptake (VO) kinetics in untrained and moderately trained individuals, particularly during conditions of low oxygen availability (i.

Osseointegration around dental implants biofunctionalized with TGFβ-1 inhibitor peptides: an in vivo study in beagle dogs.

The aim of this study was to evaluate the effect of biofunctionalization with two TGF-β1 inhibitor peptides, P17 and P144, on osseointegration of CP-Ti dental implants. A total of 36 implants (VEGA, Klockner®) with 3.5 × 8 mm internal connection were used in this study, divided in three groups: (1) control group (n = 12), (2) implants which surfaces were biofunctionalized with P17 peptide inhibitor (n = 12), (3) implants with surfaces biofunctionalized by P144 peptide (n = 12).

Use of three-dimensionally printed β-tricalcium phosphate synthetic bone graft combined with recombinant human bone morphogenic protein-2 to treat a severe radial atrophic nonunion in a Yorkshire terrier.

Objective: To describe a novel surgical approach to treat a critical-sized bone defect due to severe, radial atrophic nonunion in a miniature dog.

Study Design: Case report ANIMAL: A 1-year-old Yorkshire terrier with a critical-sized left radial defect after failed internal fixation of a transverse radial fracture.

Methods: Computed tomographic (CT) images of the radius were imported for three-dimensional (3D) printing of a custom-designed synthetic 3D-printed β-tricalcium phosphate (β-TCP) scaffold.

Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters.

Bone apatite consists of carbonated calcium-deficient hydroxyapatite (CDHA) nanocrystals. Biomimetic routes allow fabricating synthetic bone grafts that mimic biological apatite. In this work, we explored the role of two distinctive features of biomimetic apatites, namely, nanocrystal morphology (plate vs needle-like crystals) and carbonate content, on the bone regeneration potential of CDHA scaffolds in an in vivo canine model.

INTEGRA study protocol: primary care intervention in type 2 diabetes patients with poor glycaemic control.

Background: The management of hyperglycaemia and associated cardiovascular risk factors in patients with type 2 diabetes mellitus (T2DM) may reduce diabetes-related complications. The strategy to broaden the knowledge base of primary care professionals to improve health care has mainly been prompted by the current reality of limited resources and access to specialized care. The main objective of this study is to assess the effectiveness of comprehensive interventions focused on treatment intensification, decrease clinical inertia and reduce possible barriers to treatment adherence in patients with poorly controlled diabetes in a primary care setting.

Chronic high-dose beetroot juice supplementation improves time trial performance of well-trained cyclists in normoxia and hypoxia.

Dietary nitrate (NO) supplementation via beetroot juice (BR) is known to improve endurance performance in untrained and moderately trained individuals. However, conflicting results exist in well-trained individuals. Evidence suggests that the effects of NO are augmented during conditions of reduced oxygen availability (e.

Two Different Strategies to Enhance Osseointegration in Porous Titanium: Inorganic Thermo-Chemical Treatment Versus Organic Coating by Peptide Adsorption.

In this study, highly-interconnected porous titanium implants were produced by powder sintering with different porous diameters and open interconnectivity. The actual foams were produced using high cost technologies: Chemical Vapor Deposition (CVD), Physical Vapor Deposition (PVD), and spark plasma sintering, and the porosity and/or interconnection was not optimized. The aim was to generate a bioactive surface on foams using two different strategies, based on inorganic thermo-chemical treatment and organic coating by peptide adsorption, to enhance osseointegration.

Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture.

There is an urgent need of synthetic bone grafts with enhanced osteogenic capacity. This can be achieved by combining biomaterials with exogenous growth factors, which however can have numerous undesired side effects, but also by tuning the intrinsic biomaterial properties. In a previous study, we showed the synergistic effect of nanostructure and pore architecture of biomimetic calcium deficient hydroxyapatite (CDHA) scaffolds in enhancing osteoinduction, i.

Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture.

Some biomaterials are osteoinductive, that is, they are able to trigger the osteogenic process by inducing the differentiation of mesenchymal stem cells to the osteogenic lineage. Although the underlying mechanism is still unclear, microporosity and specific surface area (SSA) have been identified as critical factors in material-associated osteoinduction. However, only sintered ceramics, which have a limited range of porosities and SSA, have been analyzed so far.

Association of General and Abdominal Obesity With Hypertension, Dyslipidemia and Prediabetes in the PREDAPS Study.

Introduction And Objectives: Some anthropometric measurements show a greater capacity than others to identify the presence of cardiovascular risk factors. This study estimated the magnitude of the association of different anthropometric indicators of obesity with hypertension, dyslipidemia, and prediabetes (altered fasting plasma glucose and/or glycosylated hemoglobin).

Methods: Cross-sectional analysis of information collected from 2022 participants in the PREDAPS study (baseline phase).

Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM.

There is a plethora of calcium phosphate (CaP) scaffolds used as synthetic substitutes to bone grafts. The scaffold performance is often evaluated from the quantity of bone formed within or in direct contact with the scaffold. Micro-computed tomography (μCT) allows three-dimensional evaluation of bone formation inside scaffolds.

Population-Based National Prevalence of Thyroid Dysfunction in Spain and Associated Factors: Di@bet.es Study.

Background: The aim of this study was to investigate the national prevalence of thyroid dysfunction in Spain and its association with various clinical, environmental, and demographic variables.

Methods: The study included 4554 subjects (42.4% men) with a mean age of 50 years (range 18-93 years), who were participants in a national, cross-sectional, population-based survey conducted in 2009-2010.

Risk of Cause-Specific Death in Individuals With Diabetes: A Competing Risks Analysis.

Objective: Diabetes is a common cause of shortened life expectancy. We aimed to assess the association between diabetes and cause-specific death.

Research Design And Methods: We used the pooled analysis of individual data from 12 Spanish population cohorts with 10-year follow-up.