Preclinical pharmacology of patient-derived extracellular vesicles for the intraoperative imaging of tumors.

Extracellular vesicles (EVs) derived from the plasma of oncological patients exhibit significant tumor-targeting properties, unlike those from healthy individuals. We have previously shown the feasibility of formulating the near-infrared (NIR) fluorescent dye indocyanine green (ICG) with patient-derived extracellular vesicles (PDEVs) for selective delivery to neoplastic tissue. This staining protocol holds promise for clinical application in intraoperative tumor margin imaging, enabling precise neoplastic tissue resection.

Ultrasound-Assisted Extraction of Cannabinoids from Cannabis Sativa for Medicinal Purpose.

Over the past 20 years, the interest in Cannabis oily extracts for medicinal use compounded in pharmacy has consistently grown, along with the need to have preparations of adequate quality. Hot maceration (M) is the most frequently used method to compound oily solutions. In this work, we systematically studied the possibility of using an ultrasonic homogenizer and a sonotrode (US) as an alternative extraction method.

Spotlight on Calcipotriol/Betamethasone Fixed-Dose Combination in Topical Formulations: Is There Still Room for Innovation?

Psoriasis is a lifelong disease which requires treatment adherence for successful management. Considering the complexity of this pathology, the combination of active pharmaceutical ingredients with a synergistic mechanism of action can improve the safety and efficacy of the treatment with respect to the conventional monotherapy. Moreover, a fixed dose of therapeutic agents in a topical formulation offers the possibility to simplify administration, reduce the doses of each active ingredient, and improve patient's compliance.

Caffeic Acid-Grafted PLGA as a Novel Material for the Design of Fluvastatin-Eluting Nanoparticles for the Prevention of Neointimal Hyperplasia.

Drug-eluting nanoparticles (NPs) administered by an eluting balloon represent a novel tool to prevent restenosis after angioplasty, even if the selection of the suitable drug and biodegradable material is still a matter of debate. Herein, we provide the proof of concept of the use of a novel material obtained by combining the grafting of caffeic acid or resveratrol on a poly(lactide--glycolide) backbone (-CA-PLGA or -RV-PLGA) and the pleiotropic effects of fluvastatin chosen because of its low lipophilic profile which is challenging for the encapsulation in NPs and delivery to the artery wall cells. NPs made of such materials are biocompatible with macrophages, human smooth muscle cells (SMCs), and endothelial cells (ECs).

Repurposing of parenterally administered active substances used to treat pain both systemically and locally.

Pain is a constant in our lives. The efficacy of drug therapy administered by the parenteral route is often limited either by the physicochemical characteristics of the drug itself or its adsorption-distribution-metabolism-excretion (ADME) mechanisms. One promising alternative is the design of innovative drug delivery systems that can improve the pharmacokinetics |(PK) and/or reduce the toxicity of traditionally used drugs.

Virucidal Activity of the Pyridobenzothiazolone Derivative HeE1-17Y against Enveloped RNA Viruses.

Pyridobenzothiazolone derivatives are a promising class of broad-spectrum antivirals. However, the mode of action of these compounds remains poorly understood. The HeE1-17Y derivative has already been shown to be a potent compound against a variety of flaviviruses of global relevance.

Critical Aspects in the Preparation of Extemporaneous Flecainide Acetate Oral Solution for Paediatrics.

The availability of liquid oral preparations compounded by pharmacists is essential to meet paediatric needs which remain unanswered by the pharmaceutical industry. Unfortunately, compendial monographs are often not available and, in many cases, pre-formulation studies (e.g.

Stability of high concentrated triple intrathecal therapy for pediatrics and mitigation strategies.

Stringent formulation requirements are defined to intrathecally administer drug substances, avoiding neurological complications. In case of pediatric patients, these are further complicated due to the limited volumes of the celebrospinal fluid and, therefore, high concentrated solutions of methotrexate (MTX), cytarabine and corticosteroids (i.e.

Design and development of plastic antibodies against SARS-CoV-2 RBD based on molecularly imprinted polymers that inhibit virus infection.

The present research study reports the development of plastic antibodies based on Molecularly Imprinted Polymers (MIPs) capable of selectively binding a portion of the novel coronavirus SARS-CoV-2 spike protein. Indeed, molecular imprinting represents a very promising and attractive technology for the synthesis of MIPs characterized by specific recognition abilities for a target molecule. Given these characteristics, MIPs can be considered tailor-made synthetic antibodies obtained by a templating process.

Pre-Drawn Syringes of Comirnaty for an Efficient COVID-19 Mass Vaccination: Demonstration of Stability.

Moving towards a real mass vaccination in the context of COVID-19, healthcare professionals are required to face some criticisms due to limited data on the stability of a mRNA-based vaccine (Pfizer-BioNTech COVID-19 Vaccine in the US or Comirnaty in EU) as a dose in a 1 mL-syringe. The stability of the lipid nanoparticles and the encapsulated mRNA was evaluated in a "real-life" scenario. Specifically, we investigated the effects of different storing materials (e.

Relevance of production method on the physical stability and in vitro biopharmaceutical performances of olanzapine orodispersible film.

This study assessed the relevance of the preparation process, namely solvent casting and hot-melt ram printing, on the biopharmaceutical performances of olanzapine orodispersible films (ODF) made of maltodextrins. Beside the clinical rationale, olanzapine was selected since it is subjected to polymorphism which impacts on its bioavailability. All ODF disintegrated in less than 3 min and showed content uniformity within the acceptable values.

Extemporaneous printing of diclofenac orodispersible films for pediatrics.

Objective: The possible application of a hot-melt ram extrusion printing to the preparation of diclofenac orodispersible films (ODF) made of maltodextrin was studied focusing the attention on the effects of taste-masking agents (i.e. namely mint, licorice-mint, and sucralose) and an opacifier (titanium dioxide [TiO]).

Trends in the Characterization Methods of Orodispersible Films.

The recent increased interest in orodispersible films (ODF) stems from their ideal potential to circumvent several pharmacotherapy-related problems, such as improved medication compliance and adherence, especially in children, elderly and uncooperative patients. Their administration is well accepted by the majority of patients because ODF dissolve upon contact with the saliva in the oral cavity without the need for water intake. ODF application in personalized pharmacotherapy is currently being exploited.

Regulatory aspects and quality controls of polymer-based parenteral long-acting drug products: the challenge of approving copies.

To assure the safety and the efficacy of a medicinal product, quality and batch-to-batch reproducibility need to be guaranteed. In the case of parenteral long-acting products, the European Union (EU) and US Regulatory Authorities provide different indications, from the classification to the in vitro release assays related to such products. Despite their relevance, there are few in vitro experimental set-ups enabling researchers to discriminate among products with different in vivo behaviors.

Trends in the production methods of orodispersible films.

Interest in orodispersible films (ODF) is growing day-by-day, since this dosage form overcomes some therapeutic obstacles, such as impaired swallowing, and offers several benefits, such as the possibility to adapt the dosing requirements for a subset of patients. As a consequence, technologies to produce ODF have risen attention for possible applications in the development of patient-centric formulations. This review critically discusses current trends in the technology platforms proposed to manufacture ODF, including the innovation and opportunities to produce very small batches in a pharmacy setting.

Data on spray-drying processing to optimize the yield of materials sensitive to heat and moisture content.

Full dataset used to evaluate the spray-drying process parameters on the preparation of a micronized powder made of maltodextrin (MDX) is herein reported. The process parameters (namely, feed flow rate (FFR); inlet temperature (T); nozzle pressure (P); noozle diameter (D) and difference of pressure between cyclone and chamber (ΔP)) were screened through a Central Composite Design (2; 25; n=2) using the following responses: product yield, powder size and size dispersity (span) and the outlet temperature of the exhausted air (T). Data indicate that, in the considered range, only the product yield and the powder median diameter were influenced by the process.

Biorelevant release testing of biodegradable microspheres intended for intra-articular administration.

Characterization of controlled release formulations used for intra-articular (IA) drug administration is challenging. Bio-relevant synovial fluids (BSF), containing physiologically relevant amounts of hyaluronic acid, phospholipids and proteins, were recently proposed to simulate healthy and osteoarthritic conditions. This work aims to evaluate the performance of different controlled release formulations of methylprednisolone (MP) for IA administration, under healthy and disease states simulated conditions.

Nano-hybrid electrospun non-woven mats made of wool keratin and hydrotalcites as potential bio-active wound dressings.

In this work, nano-hybrid electrospun non-woven mats made of wool keratin combined with diclofenac loaded hydrotalcites (HTD) were prepared and characterized as potential drug delivery systems and scaffolds for fibroblast cell growth. Nano-hybrid electrospun non-woven mats showed a good adaptability to wet skin, effortlessly conforming to the three-dimensional topography of the tissue. Nanosized HTD exercised an overall reinforcing action on the electrospun non-woven mats since the nanohybrid samples displayed a reduced swelling ratio and a slower degradation profile compared to keratin-based nanofiber non-woven mats containing free diclofenac, without negative effects on drug release.

An Outlook on the European and Italian Rules to Guarantee Magistral Formulas.

Pharmaceutical compounded medicinal preparations are aimed to fulfill the special needs of a subpopulation of patients for whom a medicinal product is not commercially available. Nowadays, this activity remains an important component of pharmacy practice and an integral part of the modern healthcare system. In 2011, the Committee of Ministers of the Council of Europe adopted a resolution to harmonize quality assurance and safety standards for medicinal products prepared in pharmacies for the special needs of patients in European countries.

Medicated Foams and Film Forming Dosage Forms as Tools to Improve the Thermodynamic Activity of Drugs to be Administered Through the Skin.

Medicated foams and film forming systems are dosage forms formulated to undergo a controlled metamorphosis when applied on the skin. Indeed, due to the presence of propellant or a particular air-spray foam pump, a liquid can generate foam when applied on the stratum corneum, or a liquid or conventional dosage form can form on the skin a continuous film as a consequence of the solvent evaporation. Thanks to these controlled modifications, the drug thermodynamic activity increases favoring the skin penetration and, therefore, the bioavailability with respect to conventional semi-solid and liquid dosage forms.

Personalized orodispersible films by hot melt ram extrusion 3D printing.

This work demonstrates the feasibility of the extemporaneous preparation of maltodextrins orodispersible films (ODF) by hot-melt ram-extrusion 3D printing. This method consists of three simple technological operations which can be also implemented in a pharmacy setting. First, maltodextrins, drug, and other excipients are mixed in a mortar and wetted with the plasticizer (i.

Lyophilization of Liposomal Formulations: Still Necessary, Still Challenging.

Nowadays, the freeze-drying of liposome dispersions is still necessary to provide a solid dosage form intended for different routes of administration (i.e., parenteral, oral, nasal and/or pulmonary).

Vitamin E-stabilized UHMWPE: Biological response on human osteoblasts to wear debris.

UHMWPE doped with vitamin E was introduced to provide oxidation resistance upon sterilization, without affecting UHMWPE's mechanical properties. Particle-induced macrophage activation leads to periprosthetic bone resorption, requiring total joint replacements. During osteolysis, osteoblasts produce osteoimmunological factors such as RANKL and OPG, and the inhibitors of the Wnt pathway DKK-1 and Sclerostin.

Italian guidelines on the assessment and management of pediatric head injury in the emergency department.

Objective: We aim to formulate evidence-based recommendations to assist physicians decision-making in the assessment and management of children younger than 16 years presenting to the emergency department (ED) following a blunt head trauma with no suspicion of non-accidental injury.

Methods: These guidelines were commissioned by the Italian Society of Pediatric Emergency Medicine and include a systematic review and analysis of the literature published since 2005. Physicians with expertise and experience in the fields of pediatrics, pediatric emergency medicine, pediatric intensive care, neurosurgery and neuroradiology, as well as an experienced pediatric nurse and a parent representative were the components of the guidelines working group.