Probing Depth-Dependent Transition-Metal Redox of Lithium Nickel, Manganese, and Cobalt Oxides in Li-Ion Batteries.

Layered lithium nickel, manganese, and cobalt oxides (NMC) are among the most promising commercial positive electrodes in the past decades. Understanding the detailed surface and bulk redox processes of Ni-rich NMC can provide useful insights into material design options to boost reversible capacity and cycle life. Both hard X-ray absorption (XAS) of metal K-edges and soft XAS of metal L-edges collected from charged LiNiMnCoO (NMC622) and LiNiMnCoO (NMC811) showed that the charge capacity up to removing ∼0.

Lithium-enriched graphite anode surfaces investigated using nuclear reaction analysis.

Non-destructive Li nuclear reaction analysis techniques were used to profile the Li distribution at the surface of graphitic Li-ion battery anodes. These techniques show that Li concentrations are elevated within 300 nm of the anode surface, even in fully delithiated states. The surface region, which includes the solid electrolyte interphase, contains at least 60% of the total Li irreversibly lost during formation and cycling.

Correlating structure and transport behavior in Li and O containing pyrrolidinium ionic liquids.

Ionic liquids are a unique class of materials with several potential applications in electrochemical energy storage. When used in electrolytes, these highly coordinating solvents can influence device performance through their high viscosities and strong solvation behaviors. In this work, we explore the effects of pyrrolidinium cation structure and Li concentration on transport processes in ionic liquid electrolytes.

Non-Faradaic Li Migration and Chemical Coordination across Solid-State Battery Interfaces.

Efficient and reversible charge transfer is essential to realizing high-performance solid-state batteries. Efforts to enhance charge transfer at critical electrode-electrolyte interfaces have proven successful, yet interfacial chemistry and its impact on cell function remains poorly understood. Using X-ray photoelectron spectroscopy combined with electrochemical techniques, we elucidate chemical coordination near the LiCoO-LIPON interface, providing experimental validation of space-charge separation.

Exploring a wider range of Mg-Ca-Zn metallic glass as biocompatible alloys using combinatorial sputtering.

In order to bypass the limitation of bulk metallic glasses fabrication, we synthesized thin film metallic glasses to study the corrosion characteristics of a wide atomic% composition range, Mg(35.9-63%)Ca(4.1-21%)Zn(17.

Heme biomolecule as redox mediator and oxygen shuttle for efficient charging of lithium-oxygen batteries.

One of the greatest challenges with lithium-oxygen batteries involves identifying catalysts that facilitate the growth and evolution of cathode species on an oxygen electrode. Heterogeneous solid catalysts cannot adequately address the problematic overpotentials when the surfaces become passivated. However, there exists a class of biomolecules which have been designed by nature to guide complex solution-based oxygen chemistries.

A New Design Strategy for Observing Lithium Oxide Growth-Evolution Interactions Using Geometric Catalyst Positioning.

Understanding the catalyzed formation and evolution of lithium-oxide products in Li-O2 batteries is central to the development of next-generation energy storage technology. Catalytic sites, while effective in lowering reaction barriers, often become deactivated when placed on the surface of an oxygen electrode due to passivation by solid products. Here we investigate a mechanism for alleviating catalyst deactivation by dispersing Pd catalytic sites away from the oxygen electrode surface in a well-structured anodic aluminum oxide (AAO) porous membrane interlayer.

Pt and Pd catalyzed oxidation of Li2O2 and DMSO during Li-O2 battery charging.

Rechargeable Li-O2 and Li-air batteries require electrode and electrolyte materials that synergistically promote long-term cell operation. In this study, we investigate the role of noble metals Pt and Pd as catalysts in the Li-O2 oxidation process and their compatibility with dimethyl sulfoxide (DMSO) based electrolytes. We identify a basis for low potential Li2O2 evolution followed by oxidative decomposition of the electrolyte to form carbonate side products.

Guided Evolution of Bulk Metallic Glass Nanostructures: A Platform for Designing 3D Electrocatalytic Surfaces.

Electrochemical devices such as fuel cells, electrolyzers, lithium-air batteries, and pseudocapacitors are expected to play a major role in energy conversion/storage in the near future. Here, it is demonstrated how desirable bulk metallic glass compositions can be obtained using a combinatorial approach and it is shown that these alloys can serve as a platform technology for a wide variety of electrochemical applications through several surface modification techniques.

Ultrathin Nanotube/Nanowire Electrodes by Spin-Spray Layer-by-Layer Assembly: A Concept for Transparent Energy Storage.

Fully integrated transparent devices require versatile architectures for energy storage, yet typical battery electrodes are thick (20-100 μm) and composed of optically absorbent materials. Reducing the length scale of active materials, assembling them with a controllable method and minimizing electrode thickness should bring transparent batteries closer to reality. In this work, the rapid and controllable spin-spray layer-by-layer (SSLbL) method is used to generate high quality networks of 1D nanomaterials: single-walled carbon nanotubes (SWNT) and vanadium pentoxide (V2O5) nanowires for anode and cathode electrodes, respectively.

A mesoporous catalytic membrane architecture for lithium-oxygen battery systems.

Controlling the mesoscale geometric configuration of catalysts on the oxygen electrode is an effective strategy to achieve high reversibility and efficiency in Li-O2 batteries. Here we introduce a new Li-O2 cell architecture that employs a catalytic polymer-based membrane between the oxygen electrode and the separator. The catalytic membrane was prepared by immobilization of Pd nanoparticles on a polyacrylonitrile (PAN) nanofiber membrane and is adjacent to a carbon nanotube electrode loaded with Ru nanoparticles.

Operando observation of the gold-electrolyte interface in Li-O2 batteries.

Observing the cathode interface in Li-O2 batteries during cycling is necessary to improve our understanding of discharge product formation and evolution in practical cells. In this work a gold electrode surface is monitored by operando surface-enhanced Raman spectroscopy during typical discharge and charge cycling. During discharge, we observe the precipitation of stable and reversible lithium superoxide (LiO2), in contrast to reports that suggest it is a mere intermediate in the formation of lithium peroxide (Li(2)O2).

Catalyst and electrolyte synergy in Li-O2 batteries.

Understanding the interactions between catalyst and electrolyte in Li-O2 systems is crucial to improving capacities, efficiencies, and cycle life. In this study, supported noble metal catalysts Pt/C, Pd/C, and Au/C were paired with popular Li-O2 electrolyte solvents dimethoxyethane (DME), tetraglyme (TEGDME), and dimethyl sulfoxide (DMSO). The effects of these combinations on stability, kinetics, and activity were assessed.

Improving the assembly speed, quality, and tunability of thin conductive multilayers.

While inhomogeneous thin conductive films have been sought after for their flexibility, transparency, and strength, poor control in the processing of these materials has restricted their application. The versatile layer-by-layer assembly technique allows greater control over film deposition, but even this has been hampered by the traditional dip-coating method. Here, we employ a fully automated spin-spray layer-by-layer system (SSLbL) to rapidly produce high-quality, tunable multilayer films.

Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion.

Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes.