Development and Characterization of New Plant-Based Ice Cream Assortments Using Oleogels as Fat Source.

The objective of this study was to develop candelilla wax oleogels with hemp seed oil and olive oil and use them as a fat source in the development of new plant-based ice cream assortments. Oleogels were structured with 3 and 9% candelilla wax and characterized by oil-binding capacity, peroxide value and color parameters. The oil-binding capacities of 9% wax oleogels were significantly higher than those of 3% wax oleogels, while peroxide values of oleogels decrease with increasing wax dosage.

Green Extraction of Pectin from Sugar Beet Flakes and Its Application in Hydrogels and Cryogels.

Sugar beet flakes, a by-product of the sugar industry, were used as a source for pectin extraction that was performed using conventional citric acid extraction (CE) and two non-conventional extraction techniques-microwave-assisted extraction (MAE) and pulsed ultrasound-assisted extraction (PUAE). The influence of extraction conditions was studied for each technique based on pectin yield and galacturonic acid content, and spectroscopic, chromatographic and colorimetric methods were used for pectin characterization. Better results for pectin yield were achieved through CE (20.

Characterization of Beeswax and Rice Bran Wax Oleogels Based on Different Types of Vegetable Oils and Their Impact on Wheat Flour Dough Technological Behavior during Bun Making.

Five varieties of vegetable oil underwent oleogelation with two types of wax as follows: beeswax (BW) and rice bran wax (RW). The oleogels were analyzed for their physicochemical, thermal, and textural characteristics. The oleogels were used in the bun dough recipe at a percentage level of 5%, and the textural and rheological properties of the oleogel doughs were analyzed using dynamic and empirical rheology devices such as the Haake rheometer, the Rheofermentometer, and Mixolab.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties.

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.

A comparative study regarding the adulteration detection of honey: Physicochemical parameters vs. impedimetric data.

Honey adulteration is a major issue for European Union and its members because of an unfair practice of different producers and beekeepers, many adulterations involve the addition of sweet, concentrated syrups which may appear like honey. In our study we analysed the influence of adulteration of tilia honey with different syrups (such as corn, rice, inverted sugar, agave, maple syrups) in different percentages (5%, 10%, and 20% respectively) on physicochemical parameters (moisture content, L*, hc, pH, free acidity, electrical conductivity (EC), 5-hydroxymetilfurfural (HMF), fructose, glucose, sucrose, turanose, trehalose, melesitose and raffinose) and impedimetric properties using electrochemical impedance spectroscopy. The impedimetric sensing was made using an electrochemical cell composed of two gold electrodes, and the frequency ranged between 0.

Structuring of Cold Pressed Oils: Evaluation of the Physicochemical Characteristics and Microstructure of White Beeswax Oleogels.

The aim of the study was to characterize the gelling effect of beeswax (BW) using different types of cold pressed oil. The organogels were produced by hot mixing sunflower oil, olive oil, walnut oil, grape seed oil and hemp seed oil with 3%, 7% and 11% beeswax. Characterization of the oleogels was done using Fourier transform infrared spectroscopy (FTIR), the chemical and physical properties of the oleogels were determined, the oil binding capacity was estimated and the SEM morphology was studied.

Honey authentication and adulteration detection using emission - excitation spectra combined with chemometrics.

The aim of this study was to evaluate the usefulness of emission-excitation matrices for honey authentication and adulteration detection. For this purpose, 4 types of authentic honeys (tilia, sunflower, acacia and rape) and samples adulterated with different adulteration agents (agave, maple, inverted sugar, corn and rice in different percentages - 5%, 10% and 20%) were analysed. Each honey type and each adulteration agent exhibit unique emission-excitation spectra that can be used for the classification according to the botanical origin and for the detection of adulteration.

Characterization of Romanian Bee Pollen-An Important Nutritional Source.

Bee pollen represents an important bee product, which is produced by mixing flower pollens with nectar honey and bee's salivary substances. It represents an important source of phenolic compounds which can have great importance for importance for prophylaxis of diseases, particularly to prevent cardiovascular and neurodegenerative disorders, those having direct correlation with oxidative damage. The aim of this study was to characterize 24 bee pollen samples in terms of physicochemical parameters, organic acids, total phenolic content, total flavonoid content, individual phenolics compounds, fatty acids, and amino acids from the Nort East region of Romania, which have not been studied until now.

Bee Bread: Physicochemical Characterization and Phenolic Content Extraction Optimization.

Beebread or ambrosia is a unique product for humans and bees, which is the result of lactic fermentation on pollen in honeycombs. Bee bread is a rich source of nutrients (proteins, vitamins) and polyphenols (such as flavonoids, flavonols, phenolic acids). This study aimed to characterize bee bread in terms of physicochemical properties: pH, free acidity, glucose, fructose, sucrose, raffinose and melesitose content, total phenolic content (TPC), total flavones content (TFC), fatty acids and individual phenolics (gallic acid, protocatechiuc acid, -hydroxybenzoic acid, caffeic acid, vanillic acid, chlorogenic acid, -coumaric acid, rosmarinic acid, myricetin, luteolin, quercetin and kaempferol).

Raspberry, Rape, Thyme, Sunflower and Mint Honeys Authentication Using Voltammetric Tongue.

The aim of this study was to authenticate five types of Romanian honey (raspberry, rape, thyme, sunflower and mint) using a voltammetric tongue (VE tongue) technique. For the electronic tongue system, six electrodes (silver, gold, platinum, glass, zinc oxide and titanium dioxide) were used. The results of the melissopalynological analysis were supplemented by the data obtained with the electronic voltammetric tongue system.

Ultrasound-Assisted Extraction of Polyphenols From Crude Pollen.

The aim of this study was to evaluate the extraction efficiency of polyphenols from crude pollen by an ultrasonic process. Prior to the polyphenols extraction, the crude pollen was defatted. The extraction from defatted pollen was carried out by varying four extraction parameters: ultrasonic amplitude (20%, 60% and 100%), solid/liquid ratio (10 g/L, 20 g/L and 30 g/L), temperature (35, 50 and 65 °C) and time (10, 20 and 30 min).

Antioxidant Activity, Total Phenolic Content, Individual Phenolics and Physicochemical Parameters Suitability for Romanian Honey Authentication.

The present study aimed to evaluate the physicochemical characteristics of honey (raspberry, mint, rape, sunflower, thyme and polyfloral) produced in Romania. The honey samples were from the 2017 to 2018 harvest and were subjected to melissopalynological analysis, alongside the determination of the following physicochemical parameters: moisture content, pH, free acidity, electrical conductivity (EC), hydroxymethylfurfural (HMF) content, color, total polyphenols content (TPC), flavonoids content (FC), DPPH radical scavenging activity, phenolic acids, flavonols, sugars and organic acids in order to evaluate the usefulness of this parameters for the classification of honey according to botanical origin. The results of the melissopalynological analysis revealed that five types of honey samples had a percentage of pollen grains above the minimum of 45%, which was required in order to classify the samples as monofloral honey.

Influence of ultrasonic amplitude, temperature, time and solvent concentration on bioactive compounds extraction from propolis.

An ultrasound assisted method was investigated to extract bioactive compounds from propolis. This method was based on a simple ultrasound treatment using ethanol as an extraction medium to facilitate the disruption of the propolis cells. Four different variables were chosen for determining the influence on the extraction efficiency: ultrasonic amplitude, ethanol concentration, temperature and time; the variables were selected by Box-Behnken design experiments.

Comparative evaluation of maceration, microwave and ultrasonic-assisted extraction of phenolic compounds from propolis.

The aim of this study was to compare different techniques in order to achieve a high extraction of phenolic compounds from propolis. For this purpose, it was investigated the use of double maceration (24 h at room temperature with continuous agitation at 250 rpm), double microwave treatments (1 min at 140 W) and double ultrasound-assisted extraction (15 min at 20 kHz) using 70% ethanol. The extraction efficiency was measured based on extraction yield, total phenolic content, flavones and flavonol content, and flavanone and dihydroflavonol content.

Kinetic Improvement of Bioactive Compounds Extraction from Red Grape ( Moldova) Pomace by Ultrasonic Treatment.

Grape pomace from a red grape variety ( Moldova) cultivated in the northeastern region of Romania has been studied as a source for the extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) using ultrasonic treatment. The method of extraction described here uses two different solvents, namely 2-propanol and methanol. For each of the extraction solvents, we evaluated the singular influence and the impact of interactions between process parameters (solvent concentration, ultrasonic frequency, temperature, and extraction time) on the extraction yields of anthocyanins and phenolic compounds.

Optimization of Pectin Enzymatic Extraction from 'Fălticeni' Apple Pomace with Celluclast 1.5L.

Pectin was extracted from apple ( 'Fălticeni') pomace with Celluclast 1.5L, at doses of 20, 40, and 60 µL/g of material. The temperature and time of extraction were varied on three levels-temperature-40, 50, and 60 °C; time-12, 18, and 24 h.

Extraction, purification and characterization of pectin from alternative sources with potential technological applications.

Pectins are defined as a group of widely distributed plant cell wall polysaccharides that contain galacturonic acid linked at both the 1 and 4 positions. The wide use of pectin as an ingredient which imparts rheological and textural properties to various food products and the development of applications beyond the food industry have brought about its increase in production and influenced research towards alternative sources and improving the overall isolation process of pectic polysaccharides. In this context, this paper aims to give a complete perspective on the current state of pectin research by mainly focusing on recent research on the extraction of pectin from other feasible sources, on the post-extraction stages of pectin recovery from plant materials (purification and fractionation), and, finally, on the advancements in the study of the physical, chemical, rheological, and functional properties of pectin.

Optimization of ultrasound-assisted extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant (Solanum melongena L.) peel.

The present study describes the extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant peel using ultrasonic treatments and methanol and 2-propanol as extraction solvents. The extraction yields were optimized by varying the solvent concentration, ultrasonic frequency, temperature and time of ultrasonic treatment. Box-Behnken design was used to investigate the effect of process variables on the ultrasound-assisted extraction.