Resonantly enhanced lumped-element O-band Mach-Zehnder modulator with an ultra-wide operating wavelength range.

We demonstrate an O-band resonantly enhanced Mach-Zehnder modulator utilizing highly overcoupled resonators with staggered resonance wavelengths that achieves an operating range of 6.6 nm (7.1 nm) with a 1 dB (3 dB) optical modulation amplitude penalty.

Multi-color flow cytometer with PIC-based structured illumination.

We demonstrate a flow cytometer in which structured light illumination is used to attribute fluorescent and scattering signals to their excitation wavelength. A suitable multi-color light source emitting structured illumination patterns at 405, 488, 561 and 640 nm is developed based on a silicon nitride photonic integrated circuit and cytometry experiments are conducted with calibration beads. Performance metrics of the novel cytometer are compared with those of a mature, commercial device.

Sub-wavelength tunneling barrier in rib waveguide microring modulators with vanishing bending losses.

Silicon photonics ring resonators in rib waveguide configuration are among the most important components for wavelength-division-multiplexed communication networks. While the rib waveguide enables simple electrical connectivity in microring modulators and add-drop multiplexers, it also results in unacceptable bending losses once the circumference is shrunk below a few micrometers, limiting achievable free spectral ranges and resonant enhancements. We introduce a sub-wavelength tunneling barrier at the critical radius at which the conformally mapped effective index of the slab exceeds that of the waveguide in order to suppress these bending losses, while increasing the resonator's resistance only slightly.

Silicon nitride PIC-based multi-color laser engines for life science applications.

We implement a multi-color laser engine with silicon nitride photonic integrated circuit technology, that combines four fluorophore excitation wavelengths (405 nm, 488 nm, 561 nm, 640 nm) and splits them with variable attenuation among two output fibers used for different microscope imaging modalities. With the help of photonic integrated circuit technology, the volume of the multi-color laser engine's optics is reduced by two orders of magnitude compared to its commercially available discrete optics counterpart. Light multiplexing is implemented by means of a directional coupler based device and variable optical attenuation as well as fiber switching with thermally actuated Mach-Zehnder interferometers.

Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography.

Three-dimensional (3D) nano-printing of freeform optical waveguides, also referred to as photonic wire bonding, allows for efficient coupling between photonic chips and can greatly simplify optical system assembly. As a key advantage, the shape and the trajectory of photonic wire bonds can be adapted to the mode-field profiles and the positions of the chips, thereby offering an attractive alternative to conventional optical assembly techniques that rely on technically complex and costly high-precision alignment. However, while the fundamental advantages of the photonic wire bonding concept have been shown in proof-of-concept experiments, it has so far been unclear whether the technique can also be leveraged for practically relevant use cases with stringent reproducibility and reliability requirements.

Broadband couplers for hybrid silicon-chalcogenide glass photonic integrated circuits.

We report on the design, fabrication and testing of three types of coupling structures for hybrid chalcogenide glass GeSbS-Silicon (GeSbS-Si) photonic integrated circuit platforms. The first type is a fully etched GeSbS grating coupler defined directly in the GeSbS film. Coupling losses of 5.

High-Q inverted silica microtoroid resonators monolithically integrated into a silicon photonics platform.

We report on the monolithic integration of a new class of reflown silica microtoroid resonators with silicon nanowaveguides fabricated on top of the silica film. Connectivity with other silicon photonics devices is enabled by inversion of the toroid geometry, defined by etching a circular opening rather than a disk in an undercut silica membrane. Intrinsic quality factors of up to 2 million are achieved and several avenues of process improvement are identified that can help attain the higher quality factors (> 10) that are possible in reflown microtoroids.

8-channel WDM silicon photonics transceiver with SOA and semiconductor mode-locked laser.

We demonstrate an integrated 8 by 14 Gbps dense wavelength division multiplexed silicon photonics transceiver that makes use of an external mode-locked laser as a light source and a single semiconductor optical amplifier for post-modulation signal amplification. Remaining components necessary for modulation, filtering and (de‑)multiplexing are monolithically integrated in a single chip. In all system experiments, all eight channels are jointly operated with independent data streams in order to include impairments arising out of nonlinear effects inside the SOA while benchmarking the system performance.

Wideband multi-stage CROW filters with relaxed fabrication tolerances.

We present wideband and large free spectral range optical filters with steep passband edges for the selection of adjacent WDM communication channels that can be reliably fabricated with mainstream silicon photonics technology. The devices are based on three cascaded stages of coupled resonator optical waveguides loaded on a common bus waveguide. These stages differ in the number of resonators but are implemented with exactly identical unit cells, comprised of a matched racetrack resonator layout and a uniform spacing between cells.

Silicon Photonics Transmitter with SOA and Semiconductor Mode-Locked Laser.

We experimentally investigate an optical link relying on silicon photonics transmitter and receiver components as well as a single section semiconductor mode-locked laser as a light source and a semiconductor optical amplifier for signal amplification. A transmitter based on a silicon photonics resonant ring modulator, an external single section mode-locked laser and an external semiconductor optical amplifier operated together with a standard receiver reliably supports 14 Gbps on-off keying signaling with a signal quality factor better than 7 for 8 consecutive comb lines, as well as 25 Gbps signaling with a signal quality factor better than 7 for one isolated comb line, both without forward error correction. Resonant ring modulators and Germanium waveguide photodetectors are further hybridly integrated with chip scale driver and receiver electronics, and their co-operability tested.

Calibrated Link Budget of a Silicon Photonics WDM Transceiver with SOA and Semiconductor Mode-Locked Laser.

Based on the single channel characterization of a Silicon Photonics (SiP) transceiver with Semiconductor Optical Amplifier (SOA) and semiconductor Mode-Locked Laser (MLL), we evaluate the optical power budget of a corresponding Wavelength Division Multiplexed (WDM) link in which penalties associated to multi-channel operation and the management of polarization diversity are introduced. In particular, channel cross-talk as well as Cross Gain Modulation (XGM) and Four Wave Mixing (FWM) inside the SOA are taken into account. Based on these link budget models, the technology is expected to support up to 12 multiplexed channels without channel pre-emphasis or equalization.

High-speed resonantly enhanced silicon photonics modulator with a large operating temperature range.

We present a novel resonant Mach-Zehnder modulator whose arms are each loaded with five identical resonators. Size and power consumption are aggressively reduced compared to conventional modulators based on linear phase shifters. At the same time, a large optical bandwidth of 3.

Low V(π) Silicon photonics modulators with highly linear epitaxially grown phase shifters.

We report on the design of Silicon Mach-Zehnder carrier depletion modulators relying on epitaxially grown vertical junction diodes. Unprecedented spatial control over doping profiles resulting from combining local ion implantation with epitaxial overgrowth enables highly linear phase shifters with high modulation efficiency and comparatively low insertion losses. A high average phase shifter efficiency of VπL = 0.

Silicon photonics plasma-modulators with advanced transmission line design.

We have investigated two novel concepts for the design of transmission lines in travelling wave Mach-Zehnder interferometer based Silicon Photonics depletion modulators overcoming the analog bandwidth limitations arising from cross-talk between signal lines in push-pull modulators and reducing the linear losses of the transmission lines. We experimentally validate the concepts and demonstrate an E/O -3 dBe bandwidth of 16 GHz with a 4V drive voltage (in dual drive configuration) and 8.8 dB on-chip insertion losses.

Visible wavelength silicon nitride focusing grating coupler with AlCu/TiN reflector.

High-performance silicon nitride focusing grating couplers with AlCu/TiN reflectors for a visible wavelength (660 nm) have been designed and fabricated in a standard complementary metal-oxide-semiconductor pilot line. The influence of the bottom oxide cladding thickness on the grating decay length and efficiency is theoretically and experimentally investigated. It is shown how the metal reflector not only increases the efficiency but also allows reduction of the radiated beam size.

Silicon nitride CMOS-compatible platform for integrated photonics applications at visible wavelengths.

Silicon nitride is demonstrated as a high performance and cost-effective solution for dense integrated photonic circuits in the visible spectrum. Experimental results for nanophotonic waveguides fabricated in a standard CMOS pilot line with losses below 0.71dB/cm in an aqueous environment and 0.

Pockels effect based fully integrated, strained silicon electro-optic modulator.

We demonstrate for the first time a fully integrated electro-optic modulator based on locally strained silicon rib-waveguides. By depositing a Si3N4 strain layer directly on top of the silicon waveguide the silicon crystal is asymmetrically distorted. Thus its inversion symmetry is broken and a linear electro-optic effect is induced.

Influence of Si and N additions on structure and phase stability of Ge(2)Sb(2)Te(5) thin films.

The influence of Si and N in Ge(2)Sb(2)Te(5) (space group [Formula: see text]) on structure and phase stability thereof was studied experimentally by thin film growth and characterization as well as theoretically by ab initio calculations. It was found that Si and N most probably accumulate in the amorphous matrix embedding Ge(2)Sb(2)Te(5) grains. The incorporation of Si and N in these samples causes an increase of the crystallization temperature and the formation of finer grains.

Simulation-based comparison of cell design concepts for phase change random access memory.

The RESET operation of different design concepts for phase change random access memory (PCRAM) cell is studied and compared using a three dimensional simulation model. This numerical algorithm comprises four interacting sub-models, which describe the electrical, thermal, phase change, and percolation dynamics in the PCRAM devices during the switching operation. The so-called vertical, confined, and lateral cell geometries are evaluated in terms of their current requirements for RESET operations, which is one of the most critical issues for an achievement of high integration densities.