Decarboxylative Xanthylation under Photocatalytic Conditions.

Xanthates are widely used in organic synthesis for the construction of various molecules and have numerous applications as bioactive compounds. Here, we present their preparation via a straightforward photocatalytic decarboxylative xanthylation process involving readily available oxime esters and xanthate dimers. This approach provides access to a wide variety of xanthate compounds in moderate to good yields, including xanthates derived from relevant pharmaceutical and bioactive molecules.

Choosing between Ti(II) and Ti(III): selective reduction of titanocene dichloride by elemental lanthanides.

The reduction of titanocene dichloride CpTiCl with lanthanide metals has led to the discovery of a surprising lanthanide effect: while with most lanthanides, a divalent [CpTi] equivalent was obtained, the use of samarium or ytterbium only led to the reduction to trivalent [CpTiCl]-type complexes, including the structurally characterized heterobimetallic complex [CpTi(μ-Cl)SmCl(THF)]. These results were corroborated by reactivity studies (alkyne coupling and radical reactions), EPR spectroscopy and electrospray mass spectrometry, providing new insights into the reduction chemistry of lanthanide metals.

Visible-Light Organic Photosensitizers Based on 2-(2-Aminophenyl)benzothiazoles for Photocycloaddition Reactions.

We have studied 2-(2-aminophenyl)benzothiazole and related derivatives for their photophysical properties in view of employing them as new and readily tunable organic photocatalysts. Their triplet energies were estimated by DFT calculations to be in the range of 52-57 kcal mol, suggesting their suitability for the [2+2] photocycloaddition of unsaturated acyl imidazoles with styrene derivatives. Experimental studies have shown that 2-(2-aminophenyl)benzothiazoles comprising alkylamino groups (NHMe, NHPr) or the native amino group provide the best photocatalytic results in these visible-light mediated [2+2] reactions without the need of any additives, yielding a range of cyclobutane derivatives.

Metal-Free Decarboxylative Allylation of Oxime Esters under Light Irradiation.

Allylation reactions, often used as a key step for constructing complex molecules and drug candidates, typically rely on transition-metal (TM) catalysts. Even though TM-free radical allylations have been developed using allyl-stannanes, -sulfides, -silanes or -sulfones, much less procedures have been reported using simple and commercially available allyl halides, that are used for the preparation of the before-mentioned allyl derivatives. Here, we present a straightforward photocatalytic protocol for the decarboxylative allylation of oxime esters using allyl bromide derivatives under metal-free and mild conditions.

Activation of glycosyl methylpropiolates by TfOH.

Activation of glycosyl methylpropiolates by TfOH was investigated. Armed and superarmed glycosyl donors can be activated by use of 0.2 equivalent TfOH whereas 1.

Rare Earths-The Answer to Everything.

Rare earths, scandium, yttrium, and the fifteen lanthanoids from lanthanum to lutetium, are classified as critical metals because of their ubiquity in daily life. They are present in magnets in cars, especially electric cars; green electricity generating systems and computers; in steel manufacturing; in glass and light emission materials especially for safety lighting and lasers; in exhaust emission catalysts and supports; catalysts in artificial rubber production; in agriculture and animal husbandry; in health and especially cancer diagnosis and treatment; and in a variety of materials and electronic products essential to modern living. They have the potential to replace toxic chromates for corrosion inhibition, in magnetic refrigeration, a variety of new materials, and their role in agriculture may expand.

Photocatalyzed Amination of Alkyl Halides to Access Primary Amines.

We demonstrate that oxime ester derivatives can be used as both a halogen atom transfer (XAT) agent and an imine source under photocatalytic conditions, allowing the radical amination of alkyl halides, resulting in the formation of a broad scope of imines. Hydrolysis of the latter gives direct access to the corresponding primary amines. Mechanistically, the reaction is believed to proceed through the formation of aryl radical intermediates, which are responsible for the activation of alkyl halides via XAT.

Divalent -Octaphenyllanthanocenes: Synthesis, Structures, and Eu Luminescence.

Reductive dimerization of fulvenes using low-valent metal precursors is a straightforward one-step approach to access ethylene-bridged metallocenes. This process has so far mainly been employed with fulvenes carrying one or two substituents in the exocyclic position. In this work, a new synthesis of the unsubstituted exocyclic 1,2,3,4-tetraphenylfulvene (), its full structural characterization by NMR spectroscopy and single-crystal X-ray diffraction, as well as some photophysical properties and its first use in reductive dimerization are described.

Copper-Catalyzed Regio- and Stereoselective Hydrothiolation of Allenamides, Enamides, and Ynamides.

We report a simple protocol for the copper-catalyzed hydrothiolation of N-unsaturated precursors, i.e., allenamides, enamides, and ynamides, under mild conditions.

Photo-Induced Halogen-Atom Transfer: Generation of Halide Radicals for Selective Hydrohalogenation Reactions.

The first photo-mediated process enabling the generation of halide radicals by Halogen-Atom Transfer (XAT) is described. Contrary to radical transformations involving XAT reactivity, which exploit stable carbon radicals, this unique approach uses 1,2-dihaloethanes for the generation of unstable carbon radicals by XAT. These transient radicals then undergo β-scission with release of ethylene and formation of more stable halide radicals which have been used in selective hydrohalogenations of a large number of unsaturated hydrocarbons, including Michael acceptors, unactivated alkenes and alkynes.

Selective carbon-phosphorus bond cleavage: expanding the toolbox for accessing bulky divalent lanthanoid sandwich complexes.

The synthesis of two new tetra- and penta-phenycyclopentadienyldiphenylphosphine pro-ligands which readily undergo selective C-P bond cleavage has allowed for the facile synthesis of bulky divalent octa- and deca-phenylmetallocenes of europium, ytterbium and samarium.

Diastereoselective Synthesis of Axially Chiral Xylose-Derived 1,3-Disubstituted Alkoxyallenes: Scope, Structure, and Mechanism.

The deprotonation of differently substituted propargyl xylosides with -BuLi/TMEDA followed by protonation with -butanol at -115 °C provided a range of new axially chiral 1,3-disubstituted alkoxyallenes in a diastereoselective way. Numerous reaction parameters such as solvent, temperature, or protonating agent were examined as well as protecting groups on the xyloside moiety and the influence of the substituents on the alkyne part. The configuration of the main diastereoisomer of 3-methyl-1-xyloside-allene was determined for the first time by single-crystal X-ray diffraction analysis and nOe NMR experiments.

Aerobic and Ligand-Free Manganese-Catalyzed Homocoupling of Arenes or Aryl Halides via in Situ Formation of Aryllithiums.

Ligand-free manganese-catalyzed homocoupling of arenes or aryl halides can be carried out under aerobic conditions via the in situ formation of the corresponding aryllithiums. A wide range of biaryls and derivatives has been obtained, and a mechanism involving monomeric manganese-oxo complexes has been proposed on the basis of DFT calculations.

Application of Elemental Lanthanides in the Selective C-F Activation of Trifluoromethylated Benzofulvenes Providing Access to Various Difluoroalkenes.

The selective activation of one carbon-fluorine bond in polyfluorinated aromatic molecules or in trifluoromethyl-containing substrates offers the possibility of accessing unique fluorine-containing molecules, which are difficult to obtain by other synthetic pathways. Among various metals, which can undergo C-F activation, lanthanides (Ln) are good candidates as they form strong Ln-F bonds. Lanthanide metals are strong reducing agents with a redox potential Ln/Ln of approximately -2.

Picking One out of Three: Selective Single C-F Activation in Trifluoromethyl Groups.

The introduction of a trifluoromethyl (CF ) group into an organic molecule can modify its chemical behavior and lead to changes in its physicochemical and pharmacological properties. The CF group is often chosen for its chemical inertness and stability, which are related to the strong C-F bonds. In recent years, the potential of gaining straightforward access to difluorinated compounds through selective single C-F activation in CF groups has been unveiled.

Single or Synergistic Kinetic Resolutions of Chiral Allylalanes: Two Complementary Routes for the Asymmetric Synthesis of Syn Homoallylamines.

Two strategies based on kinetic resolution(s) of chiral alanes and providing enantioenriched syn homoallylamines are reported. The first implies a single kinetic resolution of the alane using camphor; the second requires two sequential kinetic resolutions using the synergistic combination of (-)-camphor/(R)-tert-butylsulfinamide-derived imines. This syn selectivity, specific to the use of allyaluminum, opens the way to the preparation of valuable building blocks as illustrated by the synthesis of (+)-epilupinamine.

Generation of ϵ,ϵ-Difluorinated Metal-Pentadienyl Species through Lanthanide-Mediated C-F Activation.

Heavy metal on Lewis acid: The combination of lanthanide metals and AlCl has been employed for selective single C-F activation in benzofulvenes comprising an exocyclic CF substituent. Intermediate ϵ,ϵ-difluorinated metal-dienyl species react with a large variety of aldehydes in a highly regio- and diastereoselective fashion to afford 1,1-disubstituted indenes bearing a difluorovinyl group. These new building blocks have been further transformed through a hydrogenation-cyclization process into fluorinated heterocyclic spiro compounds.

Recent Advances in the Chemistry of Pentafulvenes.

Pentafulvenes are a unique class of compounds that originally attracted attention due to their propensity to display nonbenzenoid aromaticity. Subsequently, they were recognized as valuable synthons for the construction of a wide range of compounds by virtue of their ability to display multiple cycloaddition profiles. Naturally, this area of organic chemistry has experienced rapid growth over the last five decades, fueled by elegant work showcasing the unique reactivity of pentafulvenes in a plethora of cycloaddition reactions.

(+)-Camphor-mediated kinetic resolution of allylalanes: a strategy towards enantio-enriched cyclohex-2-en-1-ylalane.

An efficient (+)-camphor-mediated kinetic resolution of racemic cyclohex-2-en-1-ylalane is described. This approach provides an enantiomerically enriched form of the alane, in situ available for synthetic uses. Applied to the allylation of aldehydes, this protocol leads to the corresponding homoallylalcohols in a highly enantioselective manner.

Lewis Acid Catalyzed Regioselective Hydroheteroarylation of Pentafulvenes.

A diverse approach toward the catalytic regioselective nucleophilic addition of nitrogen heterocycles to Lewis acid activated pentafulvenes has been established. The developed protocol introduces pentafulvenes as nonsymmetrical alkenes for the hydroheteroarylation reaction, providing alkylidenecyclopentenylation at the C-3 position of indoles and the C-2 position of pyrrole.

Titanium and Zirconium Hydride-Catalyzed Regioselective Isomerization of 1,4-Dihydrofulvenes: Access to 1-Substituted 1,2-Dihydrofulvenes.

Zirconium hydride-catalyzed C═C double bond migration from nonconjugated to conjugated dienes is described. Applied to 1-substituted 1,4-dihydrofulvenes, the migration leads selectively to 1-substituted 1,2-dihydrofulvenes. The C═C double bond migration can also be catalyzed by titanium hydride, allowing a one-pot procedure to provide 1-substituted 1,2-dihydrofulvenes from pentafulvenes via two titanium-catalyzed steps.

Cyclopent-2-enylaluminium as allylzinc precursor for the diastereoselective allylmetallation of non-racemic imines: applications to the synthesis of enantiomerically enriched heterocycles.

The generation of cyclopent-2-enylzinc from cyclopentadiene based on a titanium-catalyzed hydroalumination/transmetallation sequence is described. Applied to the allylmetallation of phenylglycinol-derived imines, this sequence leads to homoallylic amines with moderate to good stereoselectivities. The synthesis of disubstituted azetidines and piperidines illustrates the potential of the method.

Titanium-catalyzed hydroalumination of conjugated dienes: access to fulvene-derived allylaluminium reagents and their diastereoselective reactions with carbonyl compounds.

The described titanium-catalyzed hydroalumination of conjugated dienes opens up a new way to allylaluminium reagents. The reaction is carried out by using diisobutylaluminium hydride (DIBAL-H) and a catalytic amount of [Cp2TiCl2] (Cp = cyclopentadienyl). When applied to mono- and disubstitued pentafulvenes, this reaction proceeds in a highly endocyclic manner.

Reactivity differences between 2,4- and 2,5-disubstituted zirconacyclopentadienes: a highly selective and general approach to 2,4-disubstituted phospholes.

Mixtures of 2,4- and 2,5-disubstituted zirconacyclopentadienes were obtained by the reductive dimerisation of terminal alkynes using the Cp2ZrCl2/lanthanum system. Reactions of dihalophosphines with these mixtures afforded selectively the corresponding 2,4-disubstituted phospholes and 1,4-disubstituted butadienes. A new series of phospholes was characterized by multi-nuclear NMR spectroscopy and X-ray analysis.