Advanced treatment of toluene emissions with a cutting-edge algal bacterial photo-bioreactor: Performance assessment in a circular economy perspective.

A novel approach for the treatment of VOCs (by using toluene used as a model compound) and the simultaneous conversion of carbon dioxide into valuable biomass has been investigated by using a combination of an activated sludge moving bed bioreactor (MBBR) and an algal photo-bioreactor (PBR). The first unit (MBBR, R1) promoted toluene removal up to 99.9 % for inlet load (IL) of 119.

Advances in technological control of greenhouse gas emissions from wastewater in the context of circular economy.

This review paper aims to identify the main sources of carbon dioxide (CO) emissions from wastewater treatment plants (WWTPs) and highlights the technologies developed for CO capture in this milieu. CO is emitted in all the operational units of conventional WWTPs and even after the disposal of treated effluents and sludges. CO emissions from wastewater can be captured or mitigated by several technologies such as the production of biochar from sludge, the application of constructed wetlands (CWs), the treatment of wastewater in microbial electrochemical processes (microbial electrosynthesis, MES; microbial electrolytic carbon capture, MECC; in microbial carbon capture, MCC), and via microalgal cultivation.

Instrumental Odour Monitoring System Classification Performance Optimization by Analysis of Different Pattern-Recognition and Feature Extraction Techniques.

Instrumental odour monitoring systems (IOMS) are intelligent electronic sensing tools for which the primary application is the generation of odour metrics that are indicators of odour as perceived by human observers. The quality of the odour sensor signal, the mathematical treatment of the acquired data, and the validation of the correlation of the odour metric are key topics to control in order to ensure a robust and reliable measurement. The research presents and discusses the use of different pattern recognition and feature extraction techniques in the elaboration and effectiveness of the odour classification monitoring model (OCMM).

Are pharmaceuticals removal and membrane fouling in electromembrane bioreactor affected by current density?

Pharmaceutical active compounds (PhACs) have been detected at significant concentrations in various natural and artificial aquatic environments. In this study, electro membrane bioreactor (eMBR) technology was used to treat simulated municipal wastewater containing widely-used pharmaceuticals namely amoxicillin (AMX), diclofenac (DCF) and carbamazepine (CBZ). The effects of varying current density on the removal of PhACs (AMX, DCF and CBZ) and conventional pollutants (chemical oxygen demand (COD), dissolved organic carbon (DOC), humic substances, ammonia nitrogen (NH-N), nitrate nitrogen (NO-N) and orthophosphate (PO-P) species) were examined.

Characterizing the microbial community involved in anaerobic digestion of lipid-rich wastewater to produce methane gas.

This study attempted to characterize the microbial community and its role in anaerobic digestion of lipid. Reactors were fed semi-continuously with three related substrates, oil and its degradation intermediates (glycerol and long chain fatty acids (LCFAs)), with a stepwise increase in organic loading rate for 90 days. Microbial community analysis using next-generation sequencing (NGS) with the MiSeq Illumina platform revealed that Anaerolineaceae was the most dominant group of bacteria in all experiments, whereas Clostridium, Desulfovibrio, Rikenellaceae, and Treponema were observed characteristically in glycerol degradation and Leptospirales, Synergistaceae, Thermobaculaceae and Syntrophaceae were seen with high abundance in LCFA and oil mineralization.

Fouling Mitigation and Wastewater Treatment Enhancement through the Application of an Electro Moving Bed Membrane Bioreactor (eMB-MBR).

High operational cost due to membrane fouling propensity remains a major drawback for the widespread application of membrane bioreactor (MBR) technology. As a result, studies on membrane fouling mitigation through the application of integrated processes have been widely explored. In this work, the combined application of electrochemical processes and moving bed biofilm reactor (MBBR) technology within an MBR at laboratory scale was performed by applying an intermittent voltage of 3 V/cm to a reactor filled with 30% carriers.

Applicability of the electrocoagulation process in treating real municipal wastewater containing pharmaceutical active compounds.

In this study, the viability of using electrocoagulation process as a method for pharmaceuticals removal from real municipal wastewater was demonstrated. Batch experimental runs were performed using a simple laboratory scale electrochemical reactor with aluminium and stainless steel as anode and cathode, respectively. Diclofenac (DCF), carbamazepine (CBZ) and amoxicillin (AMX) were selected as representative of pharmaceuticals frequently detected in the aquatic environment.

Effect of lead speciation on its oral bioaccessibility in surface dust and soil of electronic-wastes recycling sites.

We measured bioaccessible lead (Pb) in simulated gastrointestinal fluids containing Pb-contaminated soil or dust from electronic waste (e-waste) recycling sites to assess the risk of Pb ingestion. The physiologically based extraction test (PBET) was used as in vitro bioaccessibility assay. Pb speciation was determined using X-ray absorption spectroscopy.

Removal of nickel by homogeneous granulation in a fluidized-bed reactor.

Heavy metal removal is a significant task that protects our water resources. Fluidized-bed homogeneous granulation process (FBHGP) was used to treat nickel containing wastewaters by recovering nickel in the form of nickel carbonate hydroxide granules with low moisture content rather than soft sludge. This study investigated nickel removal and recovery through HFBGP by determining the effects of varying influent nickel concentrations, [CO: Ni] molar ratios, and pH of the precipitant.

Impact of metals in surface matrices from formal and informal electronic-waste recycling around Metro Manila, the Philippines, and intra-Asian comparison.

We report concentrations, enrichment factors, and hazard indicators of 11 metals (Ag, As, Cd, Co, Cu, Fe, In, Mn, Ni, Pb, and Zn) in soil and dust surface matrices from formal and informal electronic waste (e-waste) recycling sites around Metro Manila, the Philippines, referring to soil guidelines and previous data from various e-waste recycling sites in Asia. Surface dust from e-waste recycling sites had higher levels of metal contamination than surface soil. Comparison of formal and informal e-waste recycling sites (hereafter, "formal" and "informal") revealed differences in specific contaminants.