Publications by authors named "Fimia A"

As traditionally cold areas become warmer due to climate change, temperature could no longer be a barrier to the establishment of non-native insects. This is particularly relevant for pest insects from warm and tropical areas, mainly those with some tolerance to moderately low temperatures, which could expand their range into these new locations. From this perspective, in this work we studied the morphological and biochemical responses of the Neotropical pest Paysandisia archon to low temperatures, as part of a possible strategy to colonize new areas.

View Article and Find Full Text PDF

Current cortical visual prosthesis approaches are primarily unidirectional and do not consider the feed-back circuits that exist in just about every part of the nervous system. Herein, we provide a brief overview of some recent developments for better controlling brain stimulation and present preliminary human data indicating that closed-loop strategies could considerably enhance the effectiveness, safety, and long-term stability of visual cortex stimulation. We propose that the development of improved closed-loop strategies may help to enhance our capacity to communicate with the brain.

View Article and Find Full Text PDF
Article Synopsis
  • Researchers have developed a method to retrieve the refractive index profile of photonic structures using standard diffraction experiments and rigorous coupled-wave analysis, eliminating the need for additional data collection.
  • The technique involves selecting a probe wavelength for the diffraction that is significantly smaller than the structure's lattice constant, allowing full recovery of the phases of the Fourier components.
  • The study successfully measured the slight asymmetry of nanocomposite phase grating structures through both light and neutron diffraction methods.
View Article and Find Full Text PDF
Article Synopsis
  • The red palm weevil (RPW) is a significant global pest of palm trees, and this study investigates its response to sudden drops in environmental temperature during its pre-pupal stage.
  • The researchers exposed the pre-pupae to low (5°C) and ambient (23°C) temperatures for 7 days, measuring changes in internal structure, integument morphology, and glucose levels to assess developmental impacts.
  • The findings showed that while both groups exhibited a decrease in fat body content and continued development, the cold-exposed weevils experienced a slight delay in development and higher glucose levels, suggesting that glucose may help them tolerate low temperatures.
View Article and Find Full Text PDF

Time-delay of transmitted pulses with respect to the incident pulse in bacteriorhodopsin films has been studied without the use of a pump beam. Based on a modified saturable absorber model, analytical expressions of the transmitted pulse have been obtained. As a result, time delay, distortion and fractional delay have been analyzed for sinusoidal pulses with a low background.

View Article and Find Full Text PDF

The propagation of sinusoidal pulses in bacteriorhodopsin films has been theoretically analyzed using a complete study of the photoinduced processes that take into account all the physical parameters, the coupling of rate equations with the energy transfer equation and the temperature change during the experiment. The theoretical approach was compared to experimental data and a good concordance was observed. This theoretical treatment, can be widely applied, i.

View Article and Find Full Text PDF

Combined chemo and photothermal therapy in in vitro testing has been achieved by means of multifunctional nanoparticles formed by plasmonic gold nanoclusters with a protecting shell of porous silica that contains an antitumor drug. We propose a therapeutic nanoplatform that associates the optical activity of small gold nanoparticles aggregates with the cytotoxic activity of 20(S)-camptothecin simultaneously released for the efficient destruction of cancer cells. For this purpose, a method was used for the controlled assembly of gold nanoparticles into stable clusters with a tailored absorption cross-section in the vis/NIR spectrum, which involves aggregation in alkaline medium of 15 nm diameter gold colloids protected with a thin silica layer.

View Article and Find Full Text PDF

We present a holographic system that can be used to manipulate the group velocity of light pulses. The proposed structure is based on the multiplexing of two sequential holographic volume gratings, one in transmission and the other in reflection geometry, where one of the recording beams must be the same for both structures. As in other systems such as grating induced transparency (GIT) or coupled-resonator-induced transparency (CRIT), by using the coupled wave theory it is shown that this holographic structure represents a classical analogue of the electromagnetically induced transparency (EIT).

View Article and Find Full Text PDF

Purpose: To evaluate the postoperative ocular optical quality using a double-pass method and assess visual outcomes in eyes with an apodized multifocal intraocular lens (IOL) and to correlate the findings with IOL power.

Setting: Vissum Corporation, Alicante, Spain.

Design: Case series.

View Article and Find Full Text PDF

The recent results reported in reference 1 have produced an increased interest in explaining deviations from the ideal behavior of the energetic variation of the diffraction efficiency of holographic gratings. This ideal behavior occurs when uniform gratings are recorded, and the index modulation is proportional to the energetic exposure. As a result, a typical sin(2) curve is obtained reaching a maximum diffraction efficiency and saturation at or below this value.

View Article and Find Full Text PDF

We theoretically analyze Airy beams by solving the exact vectorial Helmholtz equation using boundary conditions at a diffraction aperture. As result, the diffracted beams are obtained in the whole space; thus, we demonstrate that the parabolic trajectories are larger than those previously reported, showing that the Airy beams start to form before the Fourier plane. We also demonstrate the possibility of using a new type of Airy beams (SAiry beams) with finite energy that can be generated at the focal plane of the lens due to diffraction by a circular aperture of a spherical wave modified by a cubic phase.

View Article and Find Full Text PDF

We studied the influence of the beam ratio and intensity on the optical quality of the transmission hologram images of diffuse objects stored in a photopolymer and reconstructed in real time. The signal-to-noise ratio and the diffraction efficiency were used as measures of the optical quality. We obtained a signal-to-noise ratio of 0.

View Article and Find Full Text PDF

A method is reported that makes use of holography to study the kinetics of the radical photopolymerization of acrylamide in a polyvinyl alcohol when the Kogelnik theory is applied. A mechanism of unimolecular termination by the radicals that initiate the polymerization reaction is postulated to calculate the quantum yield, the molar-extinction coefficient, the index of refraction, and the thickness of the film. The conversion percentage of monomers is obtained along with the ratio of rate constants of the mechanism of polymerization from the nonlinear fit of the transmittance curves, their angular response, and the temporal evolution of diffraction efficiency.

View Article and Find Full Text PDF

A study of the optimization and the characteristics of a dry film photopolymerizable recording material is presented. The effects of intensity, the thickness, and the variation of the concentration of each component have been studied. Diffraction efficiencies of 80%, with energetic sensitivities of 40 mJ/cm(2), have been obtained in photosensitive films of a 35-mum thickness with a spatial frequency of 1000 lines/mm.

View Article and Find Full Text PDF

The quantum efficiency and the molar-absorption coefficients of different phenothiazine dyes are obtained by means of fitting the experimental data of transmittance as a function of time. An analytical expression for the intensity transmitted in a photopolymerizable holographic material is obtained, and good agreement between theory and experience is also achieved. The analysis of these parameters is of fundamental quantities in the photochemical characterization of holographic recording materials.

View Article and Find Full Text PDF

We present theoretical results for angular responses of transmitted and diffracted beams in mixed amplitude-phase holographic gratings. Experimental results for gratings recorded in photographic emulsions and developed without a bleaching bath, with diffraction efficiencies of >20% , are also presented. The model shows an angular shift between minimum transmittance and maximum diffraction efficiency when both index modulation and absorption coefficient modulation are present.

View Article and Find Full Text PDF

The aim of this work was to perform a complete study of the dynamic and steady-state photoinduced processes of thick bacteriorhodopsin (bR) films, taking into account all the physical parameters and the coupling of rate equations with the energy transfer equation. The theoretical approach was compared with experimental data, and good concordance was found between both sets of data. The theoretical approach shows that the values of the rate constants for solid bR films are about two or three orders of magnitude lower than those observed in solution.

View Article and Find Full Text PDF

A matrix method which relates the field and its derivative is presented for the study of wave propagation in any type of one-dimensional media. The transfer matrix is obtained from the canonical solutions of Helmholtz equations at normal incidence. The method is applied to different optical systems like a Fabry-Perot cavity formed by uniform fiber Bragg gratings, periodic dielectric structures and different quasi-periodic structures based on Fibonacci and Thue-Morse sequences of layers with constant and variable refractive index.

View Article and Find Full Text PDF

The recording of holographic reflection gratings with a spatial frequency higher than 5400 lines/mm in photopolymerizable solgel materials is experimentally demonstrated. Diffraction efficiencies near 60% and a FWHM of 2.5 nm centered at 531.

View Article and Find Full Text PDF

A method based in the application of Fixed Point Theorem (FPT) techniques to the solution of the 1D wave equation at normal incidence for materials that present a continuous (real or complex) dielectric constant is presented. As an example, the method is applied for the calculation of the electric field, reflection and transmission spectra in volume holographic gratings. It is shown that the solution obtained using this method agrees with the exact Mathieu solutions also obtained in this paper for volume holographic reflection gratings.

View Article and Find Full Text PDF

A theoretical study of light-induced modulation of the dielectric permittivity in bacteriorhodopsin films has been done (including B--> M and B --> Q transitions). Analysis of dielectric permittivity modulation enables us to determine the fundamental limits of BR to be used in a holographic data storage system, together with the optimum experimental and material conditions. In order to carry out this analysis, the macroscopic dielectric permittivity was related to the microscopic polarizability of the three states of BR considered (B, M and Q).

View Article and Find Full Text PDF

A complete characterization of unslanted holographic reflection gratings with high diffraction efficiency recorded on ultrafine grain emulsion BB640 has been achieved. By use of a wavelength-dependent absorption coefficient, the diffraction efficiency, the replay wavelength, and the spectral bandwidth of each recording has been obtained. Corresponding index modulation, absorption, and effective thickness have been obtained with high accuracy by fitting the experimental data with Kogelnik's theory.

View Article and Find Full Text PDF

Three multiplexed holographic gratings were used to fabricate 3D photonic crystals without complete band gap using ultra-fine grain holographic emulsion as the storage material. Theoretical and experimental studies were carried out in order to characterize the crystals. Good agreement between theory and experimental results was obtained, showing that it is possible to obtain a band-pass filter for a fixed direction of illumination.

View Article and Find Full Text PDF

Photonic band structures of one-dimensional photonic crystals with an amplitude-modulated dielectric constant in the unit cell were studied. With this structure two bandgaps in the visible and one in the IR region were predicted. Experimental measurements of the two photonic bandgaps in the visible spectrum were made in a photonic crystal recorded in a holographic emulsion.

View Article and Find Full Text PDF

In this paper, we describe a photopolymerizable silica glass based on acrylamide (AA) and N,N'-methylenebisacrylamide (BMA) as monomers, triethanolamine (TEA) as coinitiator and yellowish eosin (YE) as photoinitiator. We studied different compositions, analyzing the diffraction efficiency, energetic exposure and effective thickness obtained in the holographic gratings. A diffraction efficiency of 60 % with an energetic exposure of 139 mJ/cm(2) and an effective thickness of 1.

View Article and Find Full Text PDF