1.8 mJ pulses at 1560 nm based on a 55 µm core pure-erbium-doped VLMA fiber.

Despite the increasing demand for high-energy erbium lasers for LIDAR imaging applications, the scaling of the current Er-Yb co-doped technology is still hindered by a 1 µm parasitic emission. In this study, we present the first, to the best of our knowledge, utilization of the REPUSIL powder synthesis method to fabricate a 55 µm double-clad fiber with a remarkably large modal area. Doped solely with erbium and free of ytterbium, its estimated cladding absorption is 2 dB/m at 976 nm, enabling short amplification lengths.

Cascaded geometric parametric process in a tapered air-silica graded-like multimode microstructure fiber.

We experimentally study the spatial beam profile and the spectral broadening at the output of a multimode air-silica microstructure fiber taper, used along the direction of an increasing fiber diameter. By using a laser pump at 1064 nm emitting 60 ps Gaussian beam pulses, we observed a competition between Raman beam cleanup and Kerr beam self-cleaning: the multimode frequency conversion process permits to generate spectral sidebands with frequency detuning from the pump that are difficult to obtain in standard graded-index multimode fibers. The generated supercontinuum spans from 500 nm up to 2.

Effects of systemic lupus erythematosus on the brain: a systematic review of structural MRI findings and their relationships with cognitive dysfunction.

Background: Cognitive dysfunction (CD) is highly prevalent in systemic lupus erythematosus (SLE), yet the underlying mechanisms are poorly understood. Neuroimaging utilising advanced MRI metrics may yield mechanistic insights. We conducted a systematic review of neuroimaging studies to investigate the relationship between structural and diffusion MRI metrics and CD in SLE.

GaAs-chip-based mid-infrared supercontinuum generation.

The mid-infrared spectral region opens up new possibilities for applications such as molecular spectroscopy with high spatial and frequency resolution. For example, the mid-infrared light provided by synchrotron sources has helped for early diagnosis of several pathologies. However, alternative light sources at the table-top scale would enable better access to these state-of-the-art characterizations, eventually speeding up research in biology and medicine.

Three octave visible to mid-infrared supercontinuum generation seeded by multimode silica fiber pumped at 1064 nm.

Hyperspectral spectroscopy requires light sources with wide spectral ranges from the visible to the mid-infrared. Here, we demonstrate the first fiber-based mid-infrared supercontinuum covering three octaves of frequency by leveraging 1-µm laser technology. The process consists in spectral broadening of a 1064-nm pump toward 0.

Self-probed ptychography from semiconductor high-harmonic generation.

We demonstrate a method to image an object using a self-probing approach based on semiconductor high-harmonic generation. On the one hand, ptychography enables high-resolution imaging from the coherent light diffracted by an object. On the other hand, high-harmonic generation from crystals is emerging as a new source of extreme-ultraviolet ultrafast coherent light.

Optical parametric generation in OP-GaAs waveguides pumped by a femtosecond fluoride fiber laser.

We report on mid-infrared optical parametric generation in the 4-5 μm and 9-12 μm bands by pumping custom-designed orientation-patterned gallium arsenide (OP-GaAs) rib waveguides with an ultrafast femtosecond fiber laser system. This pump source is seeded by a mode-locked fluoride fiber laser with 59 MHz repetition rate and can be tuned between 2.8 and 3.

Fiber-based source of 500 kW mid-infrared solitons.

Fiber-based sources delivering high-energy few-cycle pulses at high repetition rates are currently being developed in the near-infrared spectral range, thanks to the wide availability of telecommunication-grade optical fibers and components. Similar sources in the middle-wave infrared (mid-IR) spectral domain, however, are scarce, although such sources are of high interest for applications such as high-precision frequency metrology and molecular spectroscopy or as a seed source to reach further into the mid-IR via coherent nonlinear processes. Here we report on the design of a fiber-based source of 50-nJ energy 90 fs duration pulses up to 2950 nm, corresponding to 500 kW peak power.

Frequency-resolved spatial beam mapping in multimode fibers: application to mid-infrared supercontinuum generation.

We present a new, to the best of our knowledge, spatial-spectral mapping technique permitting measurement of the beam intensity at the output of a graded-index multimode fiber (GIMF) with sub-nanometric spectral resolution. We apply this method to visualize the fine structure of the beam shape of a sideband generated at 1870 nm by geometric parametric instability (GPI) in a GIMF. After spatial-spectral characterization, we amplify the GPI sideband with a thulium-doped fiber amplifier to obtain a microjoule-scale picosecond pump whose spectrum is finally broadened in a segment of optical fiber to achieve a supercontinuum ranging from 1.

Scaling of average power in sub-MW peak power Yb-doped tapered fiber picosecond pulse amplifiers.

Prospects for average power scaling of sub-MW output peak power picosecond fiber lasers by utilization of a Yb-doped tapered fiber at the final amplification stage were studied. In this paper, it was shown experimentally that a tapered fiber allows the achievement of an average power level of 150 W (limited by the available pump power) with a peak power of 0.74 MW for 22 ps pulses with no signs of transverse mode instability.

3D time-domain beam mapping for studying nonlinear dynamics in multimode optical fibers.

Characterization of the complex spatiotemporal dynamics of optical beam propagation in nonlinear multimode fibers requires the development of advanced measurement methods, capable of capturing the real-time evolution of beam images. We present a new space-time mapping technique, permitting the direct detection, with picosecond temporal resolution, of the intensity from repetitive laser pulses over a grid of spatial samples from a magnified image of the output beam. By using this time-resolved mapping, we provide, to the best of our knowledge, the first unambiguous experimental observation of instantaneous intrapulse nonlinear coupling processes among the modes of a graded index fiber.

Coherent combining of self-cleaned multimode beams.

A low intensity light beam emerges from a graded-index, highly multimode optical fibre with a speckled shape, while at higher intensity the Kerr nonlinearity may induce a spontaneous spatial self-cleaning of the beam. Here, we reveal that we can generate two self-cleaned beams with a mutual coherence large enough to produce a clear stable fringe pattern at the output of a nonlinear interferometer. The two beams are pumped by the same input laser, yet are self-cleaned into independent multimode fibres.

Highly efficient few-mode spatial beam self-cleaning at 1.5µm.

We experimentally demonstrate that spatial beam self-cleaning can be highly efficient when obtained with a few-mode excitation in graded-index multimode optical fibers. By using 160 ps long, highly chirped (6 nm bandwidth at -3dB) optical pulses at 1562 nm, we demonstrate a one-decade reduction of the power threshold for spatial beam self-cleaning, with respect to previous experiments using pulses with laser wavelengths at 1030-1064 nm. Self-cleaned beams remain spatio-temporally stable for more than a decade of their peak power variation.

Author Correction: All semiconductor enhanced high-harmonic generation from a single nanostructured cone.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Generation of 35 kW peak power 80 fs pulses at 2.9 μm from a fully fusion-spliced fiber laser.

Tunable femtosecond light sources in the short wave and middle wave infrared regions are of utmost importance for various applications ranging from multiphoton microscopy, mid-infrared supercontinuum generation to high-harmonic generation. We report on an all-fusion-spliced fiber laser emitting 80 fs pulses up to 2.9 μm with 35 kW peak power.

All semiconductor enhanced high-harmonic generation from a single nanostructured cone.

The enhancement and control of non-linear phenomena at a nanometer scale has a wide range of applications in science and in industry. Among these phenomena, high-harmonic generation in solids is a recent focus of research to realize next generation petahertz optoelectronic devices or compact all solid state EUV sources. Here, we report on the realization of the first nanoscale high harmonic source.

Orbital angular momentum from semiconductor high-order harmonics.

Light beams carrying orbital angular momentum (OAM) have led to stunning applications in various fields from quantum information to microscopy. We examine OAM from the recently observed high-harmonic generation (HHG) in semiconductor crystals. HHG from solids could be a valuable approach for integrated high-flux short-wavelength coherent light sources.

Two-photon microscopy with a frequency-doubled fully fusion-spliced fiber laser at 1840 nm.

We introduce a fiber-based laser system providing 130 fs pulses with 3.5 nJ energy at 920 nm at a 43 MHz repetition rate and illustrate the potential of the source for two-photon excited fluorescence microscopy of living mouse brain. The laser source is based on frequency-doubling high-energy solitons generated and frequency-shifted to 1840 nm in large mode area fibers.

Adiabatically tapered microstructured mode converter for selective excitation of the fundamental mode in a few mode fiber.

We propose a new technique to selectively excite the fundamental mode in a few mode fiber (FMF). This method of excitation is made from a single mode fiber (SMF) which is inserted facing the FMF into an air-silica microstructured cane before the assembly is adiabatically tapered. We study theoretically and numerically this method by calculating the effective indices of the propagated modes, their amplitudes along the taper and the adiabaticity criteria, showing the ability to achieve an excellent selective excitation of the fundamental mode in the FMF with negligible loss.

Millijoule pulse energy 100-nanosecond Er-doped fiber laser.

We report, for the first time to our knowledge, on a single-mode millijoule-level 100-nanosecond Er-doped fiber laser operating near 1550 nm. The system features a newly developed 35-μm-core Yb-free double-clad Er-doped fiber based on P(2)O(5)-Al(2)O(3)-SiO(2) glass matrix and produces pulses with energy as high as 1 mJ at repetition rates of 1-10 kHz.

75 W 40% efficiency single-mode all-fiber erbium-doped laser cladding pumped at 976 nm.

Optimization of Yb-free Er-doped fiber for lasers and amplifiers cladding pumped at 976 nm was performed in this Letter. The single-mode fiber design includes an increased core diameter of 34 μm and properly chosen erbium and co-dopant concentrations. We demonstrate an all-fiber high power laser and power amplifier based on this fiber with the record slope efficiency of 40%.

High power all-fibered femtosecond master oscillator power amplifier at 1.56 μm.

Direct amplification of output from chirped pulse oscillator (CPO) to 3.3 W of average power (pulse energy of 118 nJ in 20 ps pulse duration before compression) was achieved in a properly designed cladding pumped large mode area Er-doped fiber. Various configurations of CPO cavity with different FWHM of output spectrum and pulse duration were investigated.

Very-large-mode-area photonic bandgap Bragg fiber polarizing in a wide spectral range.

A design of a polarizing all-glass Bragg fiber with a microstructure core has been proposed for the first time. This design provides suppression of high-order modes and of one of the polarization states of the fundamental mode. The polarizing fiber was fabricated by a new, simple method based on a combination of the modified chemical vapor deposition (MCVD) process and the rod-in-tube technique.

Highly birefringent photonic bandgap Bragg fiber loop mirror for simultaneous measurement of strain and temperature.

A highly birefringent photonic bandgap Bragg fiber loop mirror configuration for simultaneous measurement of strain and temperature is proposed. The group birefringence and the sharp loss peaks are observable in the spectral response. Because the sensing head presents different sensitivities for strain and temperature measurands, these physical parameters can be discriminated by using the matrix method.

Management of the high-order mode content in large (40 microm) core photonic bandgap Bragg fiber laser.

Very large-mode-area Yb(3+)-doped single-mode photonic bandgap (PBG) Bragg fiber oscillators are considered. The transverse hole-burning effect is numerically modeled, which helps properly design the PBG cladding and the Yb(3+)-doped region for the high-order mode content to be carefully controlled. A ratio of the Yb(3+)-doped region diameter to the overall core diameter of 40% allows for single-mode emission, even for small spool diameters of 15 cm.