An In Vitro Exploration of Interaction Mechanisms of Intracoronal Bleaching on the Compressive Strength of Conventional and Calcium Silicate-Based Self-Adhesive Resins and Their Bonding to Composite Resin Restorative Material.

The cervical resorption following intracoronal bleaching necessitates the application of impermeable cervical barriers. This study aimed to evaluate the effect of two bleaching agents on the compressive strength (CS) and shear bond strength (SBS) of two self-adhesive resins, TheraCem and Vertise Flow, to composite resin restorative material. Two hundred sixteen specimens from TheraCem and Vertise Flow were prepared in special molds and treated in three groups: nonbleached (control); sodium perborate-hydrogen peroxide (SP-HP) (sodium perborate +3% hydrogen peroxide); and HP gel (35% hydrogen peroxide gel).

Effect of crosslinking/antioxidant agents as final irrigant on the fracture resistance of endodontically treated root after radiotherapy.

Aim: To investigate the effects of Epigallocatechin gallate (EGCG) and curcumin, as a final irrigant on the fracture resistance of irradiated root that obturated with an epoxy resin sealer.

Methodology: Eighty mandibular premolars were randomly divided into non-irradiated (NIR) and irradiated (IR) groups. The teeth were irradiated at 2 Gy per fraction, 5 times a week for a total dose of 60 Gy over 6 weeks.

Shear bond strength of different tooth color restorative materials after using silver diamine fluoride in primary tooth dentin: An study.

Background: The main disadvantage of silver diamine fluoride (SDF) is its persistent dark coloring. The aim of this study was to cover this discoloration on affected primary tooth dentin with different materials and subsequently measure their shear bond strength (SBS).

Materials And Methods: In this study total of 60 primary teeth were demineralized and randomly divided into five groups ( = 12).

Pre-Sealing of Endodontic Access Cavities for the Preservation of Anterior Teeth Fracture Resistance.

Objective: Sodium hypochlorite solution (NaOCl) is an effective canal irrigant but interferes with the mechanical features of dentin and the bonding capability of adhesives when restoring endodontically treated teeth. This study evaluated whether access cavity resin sealing before using canal irrigant would augment the resistance of endodontically treated anterior teeth against fracture.

Methods: Sixty maxillary incisors underwent endodontic treatment in five groups (n = 12).

Performance of a novel self-adhesive bulk-fill composite hybrid in endodontically treated maxillary premolars: analysis of fracture resistance and failure mode.

This study evaluated the fracture resistance of endodontically treated maxillary premolars restored with a new self-adhesive composite hybrid material (Surefil one [SO]) using different protocols. A total of 72 maxillary premolars were divided into 6 groups (n = 12). The control group included intact teeth, and the other 5 groups included teeth in which disto-occlusal cavities were prepared and endodontic treatment was performed.

Synthesis and characterization of mesoporous zinc oxide nanoparticles and evaluation of their biocompatibility in L929 fibroblasts.

Objectives: This study aimed to synthesize and characterize mesoporous zinc oxide nanoparticles (ZnO NPs) and also to evaluate the cytotoxicity of mesoporous ZnO NPs on L929 mouse fibroblast cell lines using 3-(4,5- dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay.

Materials And Methods: The synthesized mesoporous ZnO NPs were extensively characterized using X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectra (EDAX), Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). The cytotoxicity of mesoporous ZnO NPs was assessed by MTT assay.

Effect of a cross-linking antioxidant agent on the bond strength of adhesive resin to irradiated dentin.

It has been shown that irradiation can cause structural changes in dentin that may reduce the bond strength of adhesives to dentin. Applying cross-linking or antioxidant agents may help reverse this detrimental effect and improve adhesion to dentin. This in vitro study aimed to evaluate the effects of epigallocatechin-3-gallate (EGCG) pretreatment and the time of adhesive bonding (24 hours vs 1 month) on the shear bond strength (SBS) of All-Bond Universal (ABU) to irradiated dentin using etch-and-rinse (ER) and self-etching (SE) modes.

Effect of natural antioxidants on bond strength recovery of resin-modified glass ionomers to the NaOCl-affected pulp chamber dentin.

Objective: This study evaluated the effect of two natural antioxidants on the compromised bond strength of a resin-modified glass ionomer (RMGI) to the sodium hypochlorite (NaOCl)-affected pulp chamber dentin.

Methods: Forty-two sound third molars were split into halves. The exposed pulp chamber dentin was ground to provide the flat dentin surfaces and divided into seven groups (n = 12), according to the solutions used for immersion: (1) Control, distilled water; (2) NaOCl, 5.

Evaluating the shear bond strength and remineralization effect of calcium silicate-based and conventional self-adhesive resin cements to caries-affected dentin.

Objective: Given the importance of preserving caries-affected dentin (CAD) in conservative dentistry, the shear bond strength (SBS) of different resin cements to CAD has been investigated. Here, we aimed to compare the SBS and remineralizing effect of a calcium silicate (TheraCem) and conventional self-adhesive cement (Panavia SA) on the SBS of CAD.

Materials And Methods: Forty-eight extracted third molars (24 sound and 24 CAD) were used.

Effect of Er:YAG Laser and Reduced Time of Acid Etching on Bond Strength of Self-adhesive Resin Cement to MTA and Biodentine.

Considering the recent trend to use mineral trioxide aggregate (MTA) and Biodentine and resin cements, more conservative approaches concurrent with adequate bond strength have always been requested. The present study aimed to evaluate the effect of pretreatment with Er:YAG laser etching versus acid-etching for 5 and 15 seconds on the micro shear bond strength of self-adhesive resin cement (SRC) to MTA and Biodentine. Forty-eight samples of each cement (MTA and Biodentine) were prepared and distributed into four groups based on surface pretreatment: 1) control, no treatment; 2) Er:YAG laser etching with energy of 60 mJ; 3) 5-second acid-etching; 4) 15-second acid-etching.

Fracture resistance of endodontically treated premolars restored with bulk-fill composite resins: The effect of fiber reinforcement.

Background: Coronal restoration of endodontically treated teeth (ETT) with mesio-occluso-distal (MOD) cavities is of a great importance in long-term success of the treatment. This study evaluated the effect of fiber reinforcement on the fracture resistance (FR) of ETT restored with flowable or paste bulk (PB)-fill composite resin compared to conventional composite (CC) resin.

Materials And Methods: In this experimental study, eighty maxillary premolars were divided into eight groups ( = 10).

Adhesion of three types of fissure sealant in saliva-contaminated and noncontaminated conditions: an in vitro study.

Purpose: To evaluate the proportion of microleakage (PM), shear bond strength (SBS), and the fissure sealant (FS) interface by scanning electron microscopy (SEM) in three kinds of FS when the enamel surfaces were contaminated with saliva.

Methods: 198 sound third molar teeth were randomly divided into three pretreatment condition groups (n = 66): dry, saliva contamination removed by cotton pellet, or saliva removed by air-drying. A resin-based FS (Clinpro™), amorphous calcium phosphate-containing FS (Aegis®), or glass ionomer-based FS (Fuji Triage®) was applied on the treated enamel, and PM and SBS were assessed.

The Effects of Various Restorative Techniques on the Fracture Resistance of Pulpotomized Permanent Premolars.

Aim: This study aimed to evaluate the effects of various restorative techniques on the fracture resistance of pulpotomized premolars with mesioocclusodistal (MOD) cavities treated with mineral trioxide aggregate (MTA) or calcium enriched mixture (CEM) cement.

Materials And Methods: One hundred and eight sound extracted maxillary premolars were randomly assigned to nine experimental groups ( = 12). The teeth in group 1 did not receive any preparation.

The influence of the operator's experience on the microleakage of two universal adhesives.

Objectives: This study aimed to investigate the influence of the operator's experience on the microleakage of two universal adhesives applied in self-etch (SE) and etch-and-rinse (E&R) modes.

Materials And Methods: Two class V cavities were prepared on the buccal and lingual surfaces of 112 caries-free extracted human molars and were divided into eight groups based on the combination of the factors "adhesive system" (Tetric N-Bond Universal Adhesive [TNU]; Scotchbond Universal Adhesive [SBU]), "adhesive strategy" (SE or E&R), and "the operators performing the procedures" (specialists in operative dentistry or intern students). After 24 h of water storage and thermocycling, the marginal microleakage was evaluated using the dye penetration technique and the data were analyzed.

Effect of restorative technique on the fracture strength and fracture mode of premolars after mineral trioxide aggregate pulpotomy.

This study aimed to compare the effects of different combinations of adhesive bases and restorative materials on the fracture strength and mode of maxillary premolars with mesio-occlusodistal (MOD) cavities after mineral trioxide aggregate (MTA) pulpotomy. Ninety-six extracted human maxillary premolars were divided into 8 groups (n = 12). Group 1 (negative control) consisted of intact teeth.

Effect of Simulated Pulpal Pressure on Knoop Hardness of Two Self-etch Adhesives with Different Aggressiveness.

Aim: Simulated pulpal pressure (PP) has been shown to affect the bond strength and nanoleakage of different adhesives at dentin interfaces but the effect of simulated PP on polymerization of adhesives has not been studied yet. Furthermore, it has been proposed that strong and mild self-etch adhesives have different polymerization behaviors. This study aimed to evaluate the effect of simulated PP on polymerization of two self-etch adhesives, Adper Prompt L-Pop (APLP) and Adper Easy Bond (AEB), by means of the Knoop hardness test.

Effect of Silver Antibacterial Agents on Bond Strength of Fiber Posts to Root Dentin.

This study was conducted to evaluate whether antibacterial pretreatment irrigation with silver nanoparticles (SNPs) and silver diamine fluoride (SDF) has any effect on bond strength of fiber posts cemented with three types of resin cements in root canal space. Fifty-four endodontically treated maxillary central incisor roots were prepared for fiber post (FRC Postec Plus NO.3, Ivoclar Vivadent) cementation and divided into nine groups in terms of three cement types and two pretreatments with silver antibacterial agents.

The Effects of Silver, Zinc Oxide, and Titanium Dioxide Nanoparticles Used as Dentin Pretreatments on the Microshear Bond Strength of a Conventional Glass Ionomer Cement to Dentin.

Aim: This study was conducted to evaluate the effects of three nanoparticle solutions used as dentin pretreatments on the microshear bond strength (µSBS) of a conventional glass ionomer cement (GIC) to dentin.

Materials And Methods: Ninety intact human molars were used after sectioning their occlusal surfaces to expose flat dentin surfaces. The specimens were randomly assigned to nine groups (n = 10).

Differential expression of drug resistance genes in CD146 positive dental pulp derived stem cells and CD146 negative fibroblasts.

Introduction: The stem cell portion of the dental pulp derived cultures (DPSCs) showed a higher resistance to cytotoxic effect of restorative dental materials compared to pulpal fibroblasts (DPFs). Here, we aimed to compare the expression of some drug resistant genes between these cells.

Methods And Materials: To separate DPSCs from DPFs, we used magnetic cell sorting technique based on CD146 expression.

The Effect of Silver, Zinc Oxide, and Titanium Dioxide Nanoparticles Used as Final Irrigation Solutions on the Fracture Resistance of Root-Filled Teeth.

Aim: This study was conducted to evaluate the effect of three nanoparticle solutions used as final root canal irrigants on the fracture resistance of endodontically treated roots.

Materials And Methods: Sixty intact single-rooted premolar teeth were used after removing the crowns below the cementum-enamel junction to standardize the length of the remaining roots to 13 mm. After instrumenting the roots using ProTaper Universal rotary instruments up to size F4, the roots were randomly divided into six groups (n=10) according to the final irrigating solutions: Group 1: normal saline; Group 2: 2% chlorhexidine (CHX); Group 3: 17% EDTA+2.

The effect of silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles on the push-out bond strength of fiber posts.

Background: This study was undertaken to investigate the effect of intraradicular dentin pretreatment with silver nanoparticles (SNPs), zinc oxide nanoparticles (ZNPs), and titanium oxide nanoparticles (TNPs) on the push-out bond strength (PBS) of fiber posts to root dentin using two types of resin cements.

Material And Methods: Eighty single-rooted human premolar roots were randomly divided into eight groups after endodontic treatment and post space preparation, according to the type of intraradicular dentin pretreatment with different nanoparticle solutions (n=20). The groups included no pretreatment (control) and pretreatments with SNPs, ZNPs, and TNPs.

Effect of proanthocyanidin mediated immediate and delayed dentin sealing on the strength of premolars restored with composite resin inlay.

Background: Immediate dentin sealing (IDS) with proanthocyanidin (PA) could be used before cementation with a self-adhesive (SA) cement. The aim of this study was to assess the effect of PA treatment on acid-etched dentin before adhesive application, in IDS and delayed dentin sealing (DDS), on the strengthening property of SA-cemented composite resin inlay in premolars.

Material And Methods: Eighty-four maxillary premolars were divided into 7 groups (n=12): 1) (Intact) Sound teeth served as controls; groups 2-7) After cavity preparation and fabrication of composite resin inlay, temporary inlays were made and cemented.

Bond strength and adhesive interfacial micromorphology of self-adhesive resin cements: Effect of reduced times of pre-etching.

Background: Although acid-etching could increase enamel bond strength of self-adhesive (SA) cements, it may lead to negative effect on dentin. The aim of this study was to assess the effect of shortening of phosphoric acid pre-etching duration on enamel/ dentin shear bond strength (SBS) and interfacial microstructure of Panavia SA Luting Plus (PASA) and Bifix SE (BXSE).

Material And Methods: For both enamel and dentin, effect of pre-etching time was significant (<0.

Correction to: Effect of Er:YAG laser etching on topography, microstructure, compressive strength, and bond strength of a universal adhesive to calcium silicate cements.

Figure 2 was incorrect in the original published version of this article. Correct figure in presented here. The original article has been corrected.