Use of chemical coagulants to control fouling potential for wastewater membrane bioreactor processes.

Chemical coagulation with ferric chloride, alum, and an organic polymer were used to control the fouling potential of mixed liquors for submerged membrane bioreactor (MBR) processes in treating municipal wastewater. Their filterability was evaluated using a submerged hollow fiber ultrafiltration apparatus operated in constant permeate flux mode. The collected transmembrane pressures over filtration time were used to calculate the membrane fouling rates.

Interrelated effects of aeration and mixed liquor fractions on membrane fouling for submerged membrane bioreactor processes in wastewater treatment.

The interactions of mixed liquor fractions and their impacts on membrane fouling were examined at different sparging aeration intensities for submerged hollow-fiber membrane bioreactors (MBR) in wastewater treatment. The mixed liquor samples were fractioned by size into MLSS, colloids quantified by colloidal TOC, and dissolved solutes. The experimental results showed that their significance in membrane fouling was strongly related to aeration intensity.

Identification of wastewater sludge characteristics to predict critical flux for membrane bioreactor processes.

The effects of sludge characteristics on critical flux were examined using a submerged membrane bioreactor pilot plant operated under different process conditions to treat municipal wastewater. The sludge in the membrane tank was characterized by measuring colloidal particle concentration, extracellular polymeric substances (EPS), mixed liquor suspended solids (MLSS), temperature, time to filter (TTF) and diluted sludge volume index (DSVI). The colloidal particle concentration was represented by the colloidal total organic carbon (TOC), which is the TOC difference between the filtrate passing through a 1.