Simultaneous enhanced antibiotic pollutants removal and sustained permeability of the membrane involving CoFeO/MoS catalyst initiated with simple HO backwashing.

Membranes for wastewater treatment should ideally exhibit sustainable high permeate production, enhanced pollutant removal, and intrinsic physical rejection. In this study, CoFeO/MoS serves as a non-homogeneous phase catalyst; it is combined with polyether sulfone membranes via liquid-induced phase separation to simultaneously sustain membrane permeability and enhance antibiotic pollutant degradation. The prepared catalytic membranes have higher pure water flux (329.

Hybrid peroxymonosulfate/activated carbon fiber-sequencing batch reactor system for efficient treatment of coking wastewater: Establishment and influential factors.

Coking wastewater contains high concentrations of toxic and low biodegradable organics, causing long hydraulic retention times for its biological treatment process. This study developed a pretreatment method for coking wastewater by using activated carbon fiber (ACF) activated peroxymonosulfate (PMS) to improve the treatment performance of subsequent biological post-treatment process, sequencing batch reactor (SBR). The results showed that, after optimization of treatment processes, the removal efficiency of chemical oxygen demand (COD), phenol, and chroma in coking wastewater reached to 76, 98, and 98%, respectively, with a significantly improved biodegradability.

Mechanism of peroxymonosulfate activation by nanoparticle Co@N-C: Experimental investigation and theoretical calculation.

The release of organic dyes, such as Rhodamine B (RhB), into industrial wastewater has led to significant issues with color pollution in aquatic environments. Herein, we prepared a cobalt nanoparticles (NPs)-based catalyst with the nitrogen-doped carbon-support (Co@N-C) for effective PMS activation. The Co@N-C/PMS system demonstrated the excellent catalytic activity of Co@N-C for activating PMS, achieving nearly 100% degradation of RhB.

Management of biofilm by an innovative layer-structured membrane for membrane biofilm reactor (MBfR) to efficient methane oxidation coupled to denitrification (AME-D).

Aerobic methane oxidation coupled with denitrification (AME-D) has garnered significant attention as a promising technology for nitrogen removal from water. Effective biofilm management on the membrane surface is essential to enhance the efficiency of nitrate removal in AME-D systems. In this study, we introduce a novel and scalable layer-structured membrane (LSM) developed using a meticulously designed polyurethane sponge.

Selective and Rapid Detection of 4-Nitrophenol in River and Treated Industrial Wastewater by a Luminescent Lanthanide Metal-Organic Framework Sensor.

Phenolic organic compounds are widely used industrial chemicals that exist extensively in the environment and have a significant impact on human health. 4-Nitrophenol (4-NP) is a typical phenolic organic compound found in aqueous environments. Efficient detection of 4-NP in wastewater is highly challenging due to the complexity of testing environmental samples.

Simultaneous methanogenesis and denitrification in an anaerobic moving bed biofilm reactor for landfill leachate treatment: Ameliorative effect of rhamnolipids.

In this study, an anaerobic moving bed biofilm reactor (AnMBBR) was developed for simultaneous methanogenesis and denitrification (SMD) to treat high-strength landfill leachate for the first time. A novel strategy using biosurfactant to ameliorate the inhibition of landfill leachate on the SMD performance was proposed and the underlying mechanisms were explored comprehensively. With the help of rhamnolipids, the chemical oxygen demand (COD) removal efficiency of landfill leachate was improved from 86.

Packed O-SnO-Sb bead-electrodes for enhanced electrocatalytic oxidation of micropollutants in water.

Electrocatalytic oxidation is an appealing treatment option for emerging micropollutants in wastewater, however, the limited reactive surface area and short service lifetime of planar electrodes hinder their industrial applications. This study introduces an innovative electrochemical wastewater treatment technology that employs packed bead-electrodes (PBE) as a dynamic electrocatalytic filter on a dimensionally stable anode (DSA) acting as a current collector. By using PBE, the electroactive volume is expanded beyond the vicinity of the common planar anode to the thick porous media of PBE with a vast electrocatalytic surface area.

Development of a novel three-dimensional biofilm-electrode system (3D-BES) loaded with Fe-modified biochars for enhanced pollutants removal in landfill leachate.

Different mass ratio iron (Fe)-loaded biochars (FeBCs) were prepared from food waste and used in the three-dimensional biofilm-electrode systems (3D-BES) as particular electrodes for landfill leachate treatment. Compared to the unmodified biochar (BC), specific surface area of Fe-loaded biochars (FeBC-3 with a Fe: biochar of 0.2:1) increased from 63.

Integrating electrochemical pre-treatment with carrier-based membrane bioreactor for efficient treatment of municipal waste transfer stations leachate.

An integrated process of electrochemical pre-treatment with carrier-based membrane bioreactor (MBR) was constructed for fresh leachate from waste transfer stations with high organic and NH-N content. Results showed that within a hydraulic retention time 40 h, the removal efficiencies of chemical oxygen demand (COD), NH-N, suspended solids (SS) and total phosphorus (TP) were over 98.5%, 91.

Intracellular electron competition in response to the oxygen pressure of the aerobic denitrification process in an O-based membrane biofilm reactor (MBfR) for nitrate removal.

This study quantitatively investigated the effect of dissolved oxygen (DO) concentration on aerobic denitrification, and showed the mechanism of aerobic denitrification from the perspective of electron competition by cultivating Pseudomonas stutzeri T13, a typical aerobic denitrifier, in an oxygen-based membrane biofilm reactor (O-based MBfR). The experiments showed that when the O pressure increased from 2 to 10 psig , the average effluent DO concentration during steady-state phases increased from 0.02 to 4.

Pilot-scale treatment of municipal garbage mechanical dewatering wastewater by an integrated system involving partial nitrification and denitrification.

The municipal solid waste (MSW) with high water content can be pre-treated by the mechanical dewatering technology to significantly decrease the leachate generation in sequential landfill treatment or to improve the efficiency for solid waste incineration, which has attracted great concerns recently. However, the generated mechanical dewatering wastewater (MDW) containing high organics and nitrogenous content has been one of the big challenges for the sustainable treatment of MSW. In this study, a pilot-scale integrated system composed of physiochemical pretreatment, anaerobic sequencing batch reactor (ASBR), partial nitrification SBR (PN-SBR), denitrification SBR (DN-SBR), and UV/O advanced oxidation process, with a capacity of 1.

Low-temperature-resistance granulation of activated sludge and the microbial responses to the granular structural stabilization.

Completely loss of granular structural stability and reliable start-up of aerobic granular sludge (AGS) system are considered as the biggest challenges for its engineering application under seasonal temperature variation, especially extremely low temperatures. In this study, two identical sequencing batch reactors (SBR) were successfully start-up at 10 °C (R1) and 25 °C (R2), respectively, and then operated under a strategy of stepwise change of temperatures to investigate the stability of the granular sludge by examining its microbial characteristics, bis (3'-5')-cyclic dimeric guanosine monophosphate (c-di-GMP), extracellular polymeric substance (EPS) and sludge physiochemical properties. The results showed that AGS formed under the low temperature preferentially secrete EPS and c-di-GMP for stable granulation and improvement of its resistance to temperature changes.

Micro-polluted water resources treatment by PVDF-TiO membrane combined with Fe/sodium dithionite (DTN)/O pre-oxidation process.

Modifying PVDF membrane by blending hydrophilic nano TiO has been highly concerning, but its practical application is not well investigated. In this study, PVDF-TiO membrane was employed in two modes to treat micro-polluted raw water for the first time, direct membrane filtration and pre-oxidation assists membrane filtration. At two filtration modes, the PVDF-TiO membrane had comparable rejection capability to the unmodified PVDF membrane, as the removal of permanganate index (COD) was 0.

Biofilm stratification in counter-diffused membrane biofilm bioreactors (MBfRs) for aerobic methane oxidation coupled to aerobic/anoxic denitrification: Effect of oxygen pressure.

Aerobic methane oxidation coupled with denitrification (AME-D) executed in membrane biofilm bioreactors (MBfRs) provides a high promise for simultaneously mitigating methane (CH) emissions and removing nitrate in wastewater. However, systematically experimental investigation on how oxygen partial pressure affects the development and characteristics of counter-diffusional biofilm, as well as its spatial stratification profiles, and the cooperative interaction of the biofilm microbes, is still absent. In this study, we combined Optical Coherence Tomography (OCT) with Confocal Laser Scanning Microscopy (CLSM) to in-situ characterize the development of counter-diffusion biofilm in the MBfR for the first time.

Effectiveness and degradation pathways of bisphenol A (BPA) initiated by hydroxyl radicals and sulfate radicals in water: Initial reaction sites based on DFT prediction.

Bisphenol A (BPA), one of the widely known endocrine-disrupting chemicals, can be effectively degraded by advanced oxidation processes in water because of the powerful reactive oxygen species. In this study, Fenton, UV/Fenton, and metal ion/peroxymonosulfate (PMS) processes were compared to investigate BPA degradation efficiency and pathways initiated by hydroxyl radicals and sulfate radicals. In contrast to the Fenton system, which only degraded 60% of BPA within 15 min, the UV/Fenton system could degrade greater than 80% of BPA, because more hydroxyl radicals (•OH) were generated under the reduction of Fe to Fe.

Efficient degradation and deiodination of iopamidol by UV/sulfite process: Assessment of typical process parameters and transformation paths.

Iopamidol (IPM) is widely used in medical clinical examination and treatment and has immeasurable harm to the ecological environment. The combination of UV and sulfite (UV/sulfite) process was developed to degrade IPM in this study. In contrast to that almost no removal of IPM was observed under sulfite reduction alone, the UV/sulfite process could efficiently reductively degrade IPM with the observed rate constant (k) of 2.

A chemosensing approach for the colorimetric and spectroscopic detection of Cr, Cu, Fe, and Gd metal ions.

Metal cations are present in domestic and industrial wastewater and have adverse effects on human and aqueous life. The present study describes the development of the molecular probe 9-anthracen-9-ylmethylene)hydrazineylidene)methyl)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-8-ol (AMHMPQ) to detect Cr, Cu, Fe, and Gd ions by using UV-visible, fluorescence, colorimetric and excitation-emission matrix (EEM) spectroscopy techniques. The interaction of Cr, Cu, Fe, and Gd can be observed by the absorption maxima shift, turn-off, colour changes, and EEM shifts.

A novel nanofibrous PAN ultrafiltration membrane embedded with ZIF-8 nanoparticles for effective removal of Congo red, Pb(II), and Cu(II) in industrial wastewater treatment.

A novel Polyacrylonitrile (PAN) composite membrane involving ZIF-8 nanoparticles, named as ZIF-8/PAN membrane, was obtained via electrospinning to remove the Congo red (CR), Pb(II) and Cu(II) ions in industrial wastewaters, during which the adsorption mechanisms were examined in this study. The adsorption efficiency of the electrospun ZIF-8/PAN membrane was as high as 89%, 92% and 76% for CR, Pb(II) and Cu(II), respectively. Comparative analysis showed that ZIF-8 nanoparticles embedded in the ZIF-8/PAN membrane accounted for these enhanced adsorption capabilities.

Effects of temperature and relative humidity on soil-air partition coefficients of organophosphate flame retardants and polybrominated diphenyl ethers.

The soil-air partition coefficients (K) of polybrominated diphenyl ethers (PBDEs) and organophosphate flame retardants (OPFRs) is important for determining their fate in soil and air media. However, K values of OPFRs and PBDEs are not available from the current literature, and the effects of environmental factors such as temperature and relative humidity (RH) on K values are not clear. In this study, a solid-phase fugacity meter was used to measure the K values of PBDEs and OPFRs at different temperatures (25, 30, 35, 40, and 45 °C) and relative humidity (RH) conditions (<3 and 100% RH), the relationships between K and octanol-air partition coefficients (K) for OPFRs and PBDEs were analyzed.

Exposure to perfluoroalkyl substances in waste recycling workers: Distributions in paired human serum and urine.

Occupational exposure to per- and polyfluoroalkyl substances (PFASs) is an emerging public health concern, because of their potential adverse health effects. In this study, concentrations of 21 legacy and alternative PFASs in paired serum and urine samples collected from 163 workers (from five waste recycling plants) were analyzed. The results showed that the average concentration of 21 PFASs in urine samples (66.

Facial fabricated biocompatible homogeneous biocarriers involving biochar to enhance denitrification performance in an anoxic moving bed biofilm reactor.

Biochar prepared from pineapple peel was facially combined with polyurethane sponges for the first time to form homogeneous biocompatible biocarriers, which can enhance denitrification performance in an anoxic MBBR. The experiments showed that a higher NO-N removal efficiency (96.24 ± 1.

Conductive polyethersulfone membrane facilely prepared by simultaneous phase inversion method for enhanced anti-fouling and separation under low driven-pressure.

Electrically conductive membranes have been regarded as a new alternative to overcome the crucial drawbacks of membranes, including permeability-selectivity trade-off and fouling. It is still challenging to prepare conductive membranes with good mechanical strength, high conductivity and stable separation performance by reliable materials and methods. This work developed a facile method of simultaneous phase inversion to prepare electrically conductive polyethersulfone (PES) membranes with carboxylic multiwalled carbon nanotubes (MWCNT) and graphene (Gr).

Perfluoroalkyl substances (PFASs) in leachate, fly ash, and bottom ash from waste incineration plants: Implications for the environmental release of PFAS.

Perfluoroalkyl substances (PFASs) are a family of chemicals widely distributed in daily use consumer products. Most of these products become municipal solid wastes (MSWs) after they have been used. In the present study, we examined different types of PFASs in leachate, fly ash and bottom ash produced from three MSW incineration plants in southern China.