Simultaneous determination of diosmin and hesperidin in combined pharmaceutical preparation by synchronous fluorescence spectrofluorimetric method.

A sensitive, rapid and green synchronous spectrofluorimetric method was developed to simultaneously analyze a binary mixture of diosmin (DSM) and hesperidin (HSP). The RSFI of both medications was measured in methanol at Δ of 100 nm. The results indicated that specific experimental factors had an impact on these intensities.

Factorial design-assisted reverse phase HPLC-UV approach for the concurrent estimation of cetirizine and azelastine in aqueous humor.

A new analytical quality by design-assisted HPLC-UV approach is presented, for the first time, for the concurrent determination of cetirizine (CTZ) and azelastine (AZE) in raw materials, commercial eye drops and aqueous humor. The two drugs are co-administered as eye drops in severe ocular allergies. A 2 full factorial design was adopted for the chromatographic optimization to ensure the best analytical performance and reliability, as well as to save time, effort and solvent consumption.

Green, Validated HPLC Method Coupled With Fluorescence Detection for the Analysis of Tafluprost in its Pure Form and Ophthalmic Formulation: Application to Aqueous Humor and Content Uniformity Testing.

A green, simple and sensitive HPLC method coupled with fluorescence detection was implemented for the quantitative determination of the anti-glaucoma drug tafluprost (TFL). Liquid chromatography was performed on HyperClone™ ODS (C18) column of dimensions; 150 × 4.6 mm i.

Two spectroscopic methods for estimation of anti-migraine medications: Sumatriptan and Zolmitriptan based on nucleophilic substitution reaction.

Sensitive and selective spectrophotometric and spectrofluorimetric methods have been developed for the estimation of two anti-migraine drugs, namely sumatriptan succinate (SUM) and zolmitriptan (ZOL). These methods depend on producing a yellow-coloured product after the reaction of the two drugs with 7-chloro-4-nitrobenz-2-oxa-1,3-diazole (NBD-Cl). The reaction products exhibited maximum absorbance at 481 nm in borate buffer of pH 9 and fluorescence emission peak at 540 nm after excitation at 470 nm for the two drugs.

Green HPLC method with time programming for the determination of the co-formulated eye drops of tafluprost and timolol in their challengeable ratio.

A new, simple and selective HPLC method was implemented for the simultaneous estimation of tafluprost (TFL) and timolol (TIM) in their new anti-glaucoma combination in the challengeable ratio of 3 and 1000 for TFL and TIM, respectively. Separation was achieved using a BDS Hypersil phenyl column and a mobile phase made up of acetonitrile: 0.015 M phosphate buffer (50:50 v/v, pH 3.

Spectrofluorimetric investigation for determination of sumatriptan succinate: application to tablets and spiked human plasma.

A simple and highly sensitive spectrofluorimetric method for the estimation of sumatriptan succinate has been investigated. The suggested method depends on the determination of the intrinsic fluorescence properties of the drug in aqueous systems at λ 350 nm following λ at 225 nm. The linearity range was 10-100 ng/ml, with a detection limit and quantitation limit of 1.

Green highly sensitive spectrofluorimetric method for rapid determination of tafluprost in its pure form and ophthalmic formulation.

A green, simple and easy spectrofluorimetric method was studied for rapid estimation of tafluprost (TFL). The native fluorescence of TFL was measured at 292 nm after excitation at 220 nm. The results were linear in water over the concentration range 50-600 ng ml with a correlation coefficient r = 0.

Application of silver nanoparticles to the chemiluminescence determination of cefditoren pivoxil using the luminol-ferricyanide system.

A new simple, accurate and sensitive sequential injection analysis chemiluminescence (CL) detection method for the determination of cefditoren pivoxil (CTP) has been developed. The developed method was based on the enhancement effect of silver nanoparticles on the CL signal arising from a luminol-potassium ferricyanide reaction in the presence of CTP. The optimum conditions relevant to the effect of luminol, potassium ferricyanide and silver nanoparticle concentrations were investigated.

Spectrofluorimetric analysis of gemifloxacin mesylate in pharmaceutical formulations.

A simple, rapid and highly sensitive spectrofluorimetric method was developed for determination of gemifloxacin mesylate (GFX) in tablets. The method is based on measuring the native fluorescence of GFX in isopropanol at 400 nm after excitation at 272 nm. The fluorescence-concentration plot was rectilinear over the range of 0.

Community-acquired methicillin-resistant Staphylococcus aureus from skin and soft tissue infections (in a sample of Egyptian population): analysis of mec gene and staphylococcal cassette chromosome.

Background: Staphylococcus aureus has been recognized as an important pathogen associated with inpatients and community infections. Community-acquired methicillin-resistant S. aureus (CA-MRSA) infections commonly present as skin and soft-tissue infections (SSTIs).

Flow-injection chemiluminescence and electrogenerated chemiluminescence determination of escitalopram oxalate in tablet form.

Rapid, simple and highly sensitive flow-injection (FI) chemiluminescence (CL) and flow-injection electrogenerated chemiluminescence (ECL) methods were developed for the determination of escitalopram oxalate (ESC), a selective serotonin reuptake inhibitor used as an antidepressant drug. The CL method was based on the CL reaction of ESC with acidic cerium(IV) and tris(2,2'-bipyridyl)ruthenium(II) (Ru(bipy)(3)(2)+). Various experimental parameters affecting CL intensity were carefully studied and optimised.

Micelle-enhanced spectrofluorimetric method for determination of cholesterol-reducing drug ezetimibe in dosage forms.

A simple and sensitive spectrofluorimetric method was developed for the determination of ezetimibe in its pharmaceutical formulations. The proposed method is based on investigation of the fluorescence spectral behavior of ezetimibe in sodium dodecyl sulfate (SDS) micellar system. In aqueous solution of acetate buffer pH 5.

Determination of enalapril maleate and atenolol in their pharmaceutical products and in biological fluids by flow-injection chemiluminescence.

A chemiluminescent method using flow injection (FI) was investigated for rapid and sensitive determination of enalapril maleate and atenolol, which are used in the treatment of hypertension. The method is based on the sensitizing effect of these drugs on the Ce(IV)-sulfite reaction. The different experimental parameters affecting the chemiluminescence (CL) intensity were carefully studied and incorporated into the procedure.

Flow-injection chemiluminometric determination of pioglitazone HCl by its sensitizing effect on the cerium-sulfite reaction.

A flow injection chemiluminescent (FI-CL) method was developed for the determination of pioglitazone HCl. It is based on the sensitizing effect of the drug on the oxidation reaction of sulfite with cerium(IV). The different experimental parameters affecting the chemiluminescence intensity, such as concentration of reagents and some physical parameters of the manifold, were carefully studied and incorporated into the procedure.

A Validated Adsorptive Stripping Voltammetric Determination of Antidiabetic Agent Pioglitazone HCl in Tablets and Biological Fluids.

Square-wave adsorptive cathodic stripping voltammetry was used to determine pioglitazone HCl in Britton Robinson buffer of pH5. The adsorptive cathodic peak was observed at -1.5 V vs.

Spectrofluorometric determination of ketorolac tromethamine via its oxidation with cerium(IV) in pharmaceutical preparations and biological fluids.

A simple and sensitive fluorometric method for determination of ketorolac tromethamine was studied. The method depends on oxidation of the drug with cerium(IV) and subsequent monitoring of the fluorescence of the induced cerium(III) at lambda(em) 365 nm after excitation at 255 nm. Different variables affecting the reaction conditions, such as the concentrations of cerium(IV), sulfuric acid concentration, reaction time, and temperature, were carefully studied and optimized.