Er:YAG Laser and Hemolasertherapy: Bone and Gingiva Gain-Case Report.

Modern dentistry has increasingly valued conservative and biologically less invasive clinical practices, seeking to preserve the patients' tissues and natural dental elements. Most extractions in the dental clinic are preceded by periodontal disease that presents bone and gingival tissue loss, compromising the aesthetics as well as the support of dental elements. The clinical approach in these cases often involves bone exertion followed by the successful installation of osseointegrated implants.

Twelve-Month Follow-Up of Different Dentinal Hypersensitivity Treatments by Photobiomodulation Therapy, Nd:YAG and Nd:YAP Lasers.

In this retrospective study, data for three different laser-assisted approaches for the management of dentinal hypersensitivity (DH) was collected ( = 920 teeth). In total, 387 teeth were treated with photobiomodulation (PBM) therapy with 660 nm red light laser (PBM group), 327 were treated with the Nd:YAG laser (1064 nm) and 206 were treated with the Nd:YAP laser (1340 nm). To assess the effectiveness of each treatment, a visual analogue scale (VAS) was used, where zero represented no pain at all and ten represented the greatest pain.

Blinded, parallel and randomized clinical evaluation of in-office dental bleaching with violet LED (405-410nm).

This clinical study evaluated the effect of bleaching performed with violet LED light (405-410 nm), either combined with hydrogen peroxide (HP) gel, or not, on color change, dental sensitivity, participants' satisfaction and impact on their quality of life. A hundred participants were divided into one of the groups (n = 25): G1 - 35% HP (4 sessions, 1x/week); G2 - violet LED (4 sessions, 1x/week); G3 - violet LED (4 sessions, 2x/week); G4 - hybrid technique (violet LED + 35% HP; 4 sessions, 1x/week). Color evaluation was performed with colorimetric tests (objective and subjective), before, 14 days and 3 months after completion.

Evaluation of the Effectiveness of Dental Bleaching with Carbamide Peroxide and Violet Light.

The aim of the current study was to use the CIELab system to evaluate the performance of the whitening treatment involving violet light-emitting diode (LED) combined with a home 10% and 22% carbamide peroxide dental bleaching technique on dental enamel. Fifty blocks of bovine dental enamel were divided into five groups: control group (control), receiving only LED irradiation; Whitening 10%, receiving 10% carbamide peroxide treatment; Whitening 10%+VL, receiving 10% carbamide peroxide treatment combined with LED irradiation; Whitening 22%, receiving 22% carbamide peroxide treatment; and Whitening 22%+VL, receiving 22% carbamide peroxide treatment combined with violet LED irradiation. Color tests were performed before the protocols, after 1 week and after 2 weeks of treatment by using a spectrophotometer and the CIELab parameters: L*, (a*) and (b*).

Clinical evaluation of in-office tooth whitening with violet LED (405 nm): A double-blind randomized controlled clinical trial.

Background: Although there is little evidence showing the effectiveness of violet LED on in-office tooth whitening, there are some studies which have reported satisfactory results. This double-blind randomized controlled clinical trial aimed to evaluate the effect of a violet light emission diode (LED) (405 nm) system, used in-office, on tooth whitening, sensitivity, use of medication after whitening and quality of life.

Methods: Eight patients were randomized into 4 groups (n = 20): G1 - violet LED, G2 - 35% carbamide peroxide (CP) and violet LED, G3 only CP 35% and G4 35% hydrogen peroxide (HP).

Effect of Er:YAG Laser and Association of Protocols on the Demineralized Enamel Microhardness.

The aim of this study was to analyze the microhardness of demineralized enamel following different treatments (fluoride varnish, Er:YAG laser, and Er:YAG laser associated with fluoride varnish). Forty-eight enamel blocks (4 × 4 × 7 mm) were divided into six groups ( = 8): (S) Sound; (DE) Demineralized; (DED) DE + Duraphat 5% (fluoride varnish); (DEL20) DE + Er:YAG laser (20 mJ pulse mode; 0.20 W; 10 Hz; 60 sec; 1.

Microleakage of "Bulk-Fill" Composite Resin for Class II Restorations Pretreated With CO Laser in Deciduous Molars: An Study.

Microleakage has been reported to cause dentin hypersensitivity because of the passage of bacteria and their products through the restoration-tooth interface and is one of the main reasons for replacement of restorations. CO laser can be used for treatment of dentin hypersensitivity. Thus, this study aimed to evaluate in vitro the microleakage in composite restorations following surface pretreatment with acid etching and CO laser.

Clinical Evaluation of In-Office Dental Bleaching Using a Violet Light-Emitted Diode.

To clinically evaluate the effect of the violet light-emitted diode (LED) light (405-410 nm) associated to in-office dental bleaching with 35% carbamide peroxide, on tooth color change and sensitivity. Participant's satisfaction after treatment was also evaluated. A total of 50 participants were selected and randomized into a treatment group ( = 25): G1-two bleaching sessions of 30 min each, with 7-day interval (D0 and D7); G2-two bleaching sessions (same protocol as G1) associated with violet LED light, 30 min each session.

Evaluation of in-office tooth whitening treatment with violet LED: protocol for a randomised controlled clinical trial.

Introduction: In-office tooth whitening treatment using violet light emited diode (LED) (405 nm) is a novel bleaching method that causes less sensitivity while offering the same effectiveness as the gold standard (35% hydrogen peroxide, HO). This study describes a protocol for the first randomised controlled clinical trial to compare the effects of the two methods.

Methods And Analysis: Eighty patients will be divided into four groups: G1 violet LED; G2 violet LED +35% carbamide peroxide; G3 35% HO and G4 violet LED +gingivoplasty.

Hemolasertherapy: A Novel Procedure for Gingival Papilla Regeneration-Case Report.

Background: Interdental papilla is of major importance to patients' orofacial aesthetics, especially regarding anterior teeth as part of the smile's harmony. Loss of gingival tissue, which constitutes interdental papilla, forms what in odontology is called black spaces. This loss, besides affecting the smile's aesthetics, also provokes phonetic and functional damage.

Analysis of Human Tooth Pulp Chamber Temperature After 670 nm Laser Irradiation: In Vitro Study.

Objective: One of the limiting factors of employing laser radiation on dental therapies is the potential of causing thermal injuries to pulp tissues. The purpose of this study was to evaluate intra-chamber temperature increase on extracted human teeth exposed to 670 nm wavelength InGaAlP laser diode radiation.

Materials And Methods: In vitro intra-chamber temperature measurements of 12 standardized human teeth (incisors, canines, premolars, and molars; n = 3) were taken both before and after laser radiation.

Use of laser fluorescence in dental caries diagnosis: a fluorescence x biomolecular vibrational spectroscopic comparative study.

The aim of this work was to verify the existence of correlation between Raman spectroscopy readings of phosphate apatite (~960 cm-1), fluoridated apatite (~575 cm-1) and organic matrix (~1450 cm-1) levels and Diagnodent® readings at different stages of dental caries in extracted human teeth. The mean peak value of fluorescence in the carious area was recorded and teeth were divided in enamel caries, dentin caries and sound dental structure. After fluorescence readings, Raman spectroscopy was carried out on the same sites.

Shear bond strength of two adhesive systems bonded to Er:YAG laser-prepared dentin.

Dentinal surfaces prepared with an Er:YAG laser have distinctly different characteristics compared to those prepared with conventional instruments. The objective of this study was to evaluate the shear bond strength of a total-etch adhesive system and a self-etch adhesive system to dentin, prepared conventionally or with an Er:YAG laser. Specimens that were prepared with a diamond bur and treated with the total-etch adhesive showed the highest mean bond strength, followed by specimens prepared with the laser and treated with the total-etch adhesive, specimens prepared with a diamond bur and treated with the self-etch adhesive, and specimens prepared with the laser and treated with the self-etch adhesive, but there were no differences among the groups (P > 0.

Raman spectroscopy validation of DIAGNOdent-assisted fluorescence readings on tibial fractures treated with laser phototherapy, BMPs, guided bone regeneration, and miniplates.

Objectives: We aimed to assess through Raman spectroscopy and fluorescence the levels of calcium hydroxyapatite (CHA) and lipids and proteins in complete fractures treated with internal rigid fixation (IRF) treated or not with laser phototherapy (LPT) and associated or not with bone morphogenetic proteins (BMPs) and guided bone regeneration (GBR).

Background: Fractures have different etiologies and treatments and may be associated with bone losses. LPT has been shown to improve bone healing.

Effects of heating by steam autoclaving and Er:YAG laser etching on dentin components.

The simultaneous need for infection-control protocols in sample preparations and for safe laser irradiation parameters prompted this study about the effects of heat produced by both sample sterilization and laser etching on dentin components. The dentin was exposed on 30 bovine incisors, and then divided into two main groups: autoclaved (group A) or thymol treatment (group B). The surface of the dentin was schematically divided into four areas, with each one corresponding to a treatment subgroup.

Influence of the parameters of the Er:YAG laser on the apical sealing of apicectomized teeth.

Failures in the sealing of the tooth apex have been considered to be responsible for most of the failures of apical surgeries. The Er:YAG laser has been proposed as an alternative for the use of rotator instruments in surgical endodontics due to its precision, lack of vibration, less post-operative discomfort, bacterial reduction, and less stress for patients and professionals. Following approval by the ethics committee, 12 extracted human canines without previous endodontic treatment with anatomically normal roots and free from apical lesions were washed in running tap water and disinfected.

Use of 660-nm diode laser in the prevention and treatment of human oral mucositis induced by radiotherapy and chemotherapy.

Objective: The aim of this multidisciplinary study was to evaluate quantitatively and qualitatively the effect of a 660-nm diode laser in the prevention and treatment of human oral mucositis (OM) in patients suffering from head and neck cancer who had undergone radiotherapy and chemotherapy.

Background Data: OM is a severe oral lesion resulting from the toxic effects of treatment for cancer in the head and neck region. Low-level laser therapy is indicated to prevent and treat this oral complication and may be used alone or in association with conventional drug treatment, producing pain relief and wound repair.

Effects of Er:YAG laser irradiation and manipulation treatments on dentin components, part 2: energy-dispersive X-ray fluorescence spectrometry study.

The effects of laser etching, decontamination, and storage treatments on dentin components were studied by energy-dispersive X-ray fluorescence spectrometry (EDXRF). Thirty bovine incisors were prepared to expose the dentin surface and then divided into two main groups based upon the decontamination process and storage procedure: autoclaved (group A, n=15) or stored in aqueous thymol solution (group B, n=15). The surfaces of the dentin slices were schematically divided into four areas, with each one corresponding to a treatment subgroup.

Effects of Er:YAG laser irradiation and manipulation treatments on dentin components, part 1: Fourier transform-Raman study.

The effects of laser etching, decontamination, and storage treatments on dentin components were studied using Fourier transform (FT)-Raman spectroscopy. Thirty bovine incisors were prepared to expose the dentin surface and then divided in two main groups based upon the decontamination process and storage procedure: autoclaved (group A, n=15) or stored in thymol aqueous solution (group B, n=15). The surfaces of the dentin slices were schematically divided into four areas, with each one corresponding to a treatment subgroup.

Comparison of temperature increase in in vitro human tooth pulp by different light sources in the dental whitening process.

This work evaluated the increase in dental pulp temperature caused by different light sources, used in the dental whitening process, following the irradiation protocol from the light manufacturer. Human incisor, canine and premolar teeth were used. A whitening gel made of hydrogen peroxide 35% v/v and a condenser agent were applied to each tooth, on the vestibular surface, and was activated by five different light sources: photo-polymerizer with blue bandpass filtered halogen lamp (HL) (600 mW, lambda = 430-480 nm), blue light emitting diode (LED) (BL) (1 W, lambda = 470 nm), blue LED associated with infrared diode laser (BL+IL) (120 mW, lambda = 795 nm), green LED (GL) (600 mW, lambda = 530 nm) and green LED associated with infrared diode laser (GL+IL) (120 mW, lambda = 795 nm), with the equipment turned on, an exposure time of 1 min, and resting time of 30 s, repeated three times.

Combined FT-Raman and SEM studies of the effects of Er:YAG laser irradiation on dentin.

Objective: This study evaluated the molecular and morphological changes on dentin elements after Er:YAG laser irradiation.

Background Data: Spectroscopy studies reporting the effects of Er:YAG laser irradiation as an alternative to acid etching are needed to better understand the laser's effects.

Methods: The occlusal one-third of the crown of six human third molars was removed.

Effects of treatment for manipulation of teeth and Er:YAG laser irradiation on dentin: a Raman spectroscopy analysis.

Objective: The main purpose of this study was to evaluate the utility of Raman spectroscopy analysis as a research tool to study the effects of Er:YAG laser etching on dentin mineral and organic components. A secondary aim was to study the effects of the decontamination process and the storage procedure on dentin components.

Background Data: There are no spectroscopy reports relating the effects of Er:YAG laser irradiation as an alternative to acid etching and the manipulation process on the dentin structure.