Molecular Simulation of Cyclohexane in Nanoporous Materials: Adsorption of Conformers and Coadsorption with Water and Carbon Dioxide.

Molecular simulation is used to investigate the adsorption of an organic molecule and its different conformers into various nanoporous adsorbents. In more detail, we perform grand canonical Monte Carlo simulations to determine the adsorption isotherms for cyclohexane with its three conformers (chair, boat, and twisted boat) at three different temperatures into a molecular model of active carbons and two metal-organic frameworks (MOFs) (Cu-BTC and Al-Fum). By considering the adsorption of each conformer separately, we show that the adsorption isotherms are weakly dependent on the molecular conformation.

Development of a cell for in-situ/operando Mössbauer spectroscopy studies of Catalysts: Application to the characterization of iron nanoparticles used in Fischer-Tropsch reaction.

In this paper, we report the design of a stainless-steel cell with polyimide film windows for carrying out in situ Mossbauer spectroscopy studies with a horizontal x-ray beam. It allows recording spectra at pressures up to 0.2-0.

Evaluation of HKUST-1 as Volatile Organic Compound Adsorbents for Respiratory Filters.

Cyclohexane is a representative of volatile organic compounds (VOCs). VOCs can cause serious health problems in case of continuous exposure; therefore, it is essential to develop efficient personal protective equipment. Historically, activated carbons are used as VOC adsorbents.

Rhodium-Based Metal-Organic Polyhedra Assemblies for Selective CO Photoreduction.

Heterogenization of molecular catalysts via their immobilization within extended structures often results in a lowering of their catalytic properties due to a change in their coordination sphere. Metal-organic polyhedra (MOP) are an emerging class of well-defined hybrid compounds with a high number of accessible metal sites organized around an inner cavity, making them appealing candidates for catalytic applications. Here, we demonstrate a design strategy that enhances the catalytic properties of dirhodium paddlewheels heterogenized within MOP (Rh-MOP) and their three-dimensional assembled supramolecular structures, which proved to be very efficient catalysts for the selective photochemical reduction of carbon dioxide to formic acid.

Adsorber heat exchanger using Al-fumarate beads for heat-pump applications - a transport study.

Metal-Organic Frameworks (MOFs), thanks to their type V water adsorption isotherms ("S-Shape") and large water capacities, are considered as potential breakthrough adsorbents for heat-pump applications. In particular, Al(OH)-fumarate could enable efficient regeneration at a lower temperature than silica-gel which would allow us to address the conversion of waste heat at low temperature such as found in data centers. Despite its greater adsorption capacity features, heat and mass transport limitations could jeopardize the potential performance of Al(OH)-fumarate.

Molecular Porous Photosystems Tailored for Long-Term Photocatalytic CO Reduction.

The molecular-level structuration of two full photosystems into conjugated porous organic polymers is reported. The strategy of heterogenization gives rise to photosystems which are still fully active after 4 days of continuous illumination. Those materials catalyze the carbon dioxide photoreduction driven by visible light to produce up to three grams of formate per gram of catalyst.

Controlled grafting of dialkylphosphonate-based ionic liquids on γ-alumina: design of hybrid materials with high potential for CO separation applications.

In this work we provide a detailed study on grafting reactions of various dialkylphosphonate-based ILs. Special attention has been devoted to a comprehensive investigation on how the nature of the anion and the organic spacer composition (hydrophilic or hydrophobic groups) could impact the grafting densities and bonding modes of phosphonate-based ILs anchored to γ-alumina (γ-AlO) powders. For the first time, the bonding of phosphonate-based ILs with only surface hexacoordinated aluminum nuclei was established using both solid-state P-Al D-HMQC and P NMR experiments.

Hydrogenation Size-Selective Pt/Hollow Beta Catalysts.

The aim of the present work is to synthesize a zeolite-based catalyst with a hollow morphology and highly dispersed metal nanoparticles (NPs) encapsulated inside the zeolite micropores. For this purpose, we have studied a treatment using tetraalkylammonium (TAA) bromides for the selective removal of a large Pt particle from the outer surface of a hollow Beta zeolite. TEM analysis reveals that we succeeded in the synthesis of a hollow beta zeolite single crystal with encapsulated particles, with a high dispersion of 50-60 %.

Quantitative structure-property relationship approach to predicting xylene separation with diverse exchanged faujasites.

Streamlining the xylene separation process on faujasites is a promising way to design innovative adsorbents for this application. For this purpose, we present herein an original quantitative structure-property relationship (QSPR) approach. It deals with the development of a multi-linear predictive model correlating the separation properties with a set of structural descriptors for the adsorbents.

Sensitive Photoacoustic IR Spectroscopy for the Characterization of Amino/Azido Mixed-Linker Metal-Organic Frameworks.

Photoacoustic Fourier-transform infrared spectroscopy makes it possible to determine the organic composition of mixed-linker metal-organic frameworks. The sound produced upon IR irradiation enables the discrimination of azido and amino linkers in three different MOF platforms with a sensitivity that is two orders of magnitude higher than that achieved using classic IR analysis.

Monovalent and bivalent cations exchange isotherms for faujasites X and Y.

This study addresses the modeling of exchange isotherms for faujasite-type zeolites X and Y with K, Cs, Ca and Ba cations based on a large experimental dataset obtained under operating conditions of 0.5 N total normality and an exchange temperature of 80 °C. The isotherm models are based on the mass action law.

Fast 'Operando' electron nanotomography.

Electron tomography in transmission electron microscopy provides valuable three-dimensional structural, morphological and chemical information of condensed matter at nanoscale. Current image acquisitions require at least tens of minutes, which prohibits the analysis of nano-objects evolving rapidly such as under dynamic environmental conditions. Reducing the acquisition duration to tens of seconds or less permits to follow in 3D the same object during its evolution under varying temperatures and pressures.

Molecular Level Characterization of the Structure and Interactions in Peptide-Functionalized Metal-Organic Frameworks.

We use density functional theory, newly parameterized molecular dynamics simulations, and last generation N dynamic nuclear polarization surface enhanced solid-state NMR spectroscopy (DNP SENS) to understand graft-host interactions and effects imposed by the metal-organic framework (MOF) host on peptide conformations in a peptide-functionalized MOF. Focusing on two grafts typified by MIL-68-proline (-Pro) and MIL-68-glycine-proline (-Gly-Pro), we identified the most likely peptide conformations adopted in the functionalized hybrid frameworks. We found that hydrogen bond interactions between the graft and the surface hydroxyl groups of the MOF are essential in determining the peptides conformation(s).

Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles.

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc.

A Pt/Al2O3-supported metal-organic framework film as the size-selective core-shell hydrogenation catalyst.

The substituted imidazolate-based MOF (SIM-1) easily forms a homogeneous layer at the surface of millimetric platinum-loaded alumina beads. This new core-shell SIM-1@Pt/Al2O3 catalyst shows the fine molecular sieving effect for the Pt-catalyzed hydrogenation of carbon-carbon double bonds.

Origin of highly active metal-organic framework catalysts: defects? Defects!

This article provides a comprehensive review of the nature of catalytic sites in MOFs. In the last decade, a number of striking studies have reported outstanding catalytic activities of MOFs. In all cases, the authors were intrigued as it was unexpected from the ideal structure.

Enantiopure Peptide-Functionalized Metal-Organic Frameworks.

We present herein the first example of metal-organic frameworks postfunctionalized with peptides. Our microwave-assisted postsynthetic modification method yields enantiopure peptides anchored inside MOF cavities. Al-MIL-101-NH2, In-MIL-68-NH2, and Zr-UiO-66-NH2 were chosen as starting platforms.

Superstructure of a substituted zeolitic imidazolate metal-organic framework determined by combining proton solid-state NMR spectroscopy and DFT calculations.

We report the supercell crystal structure of a ZIF-8 analog substituted imidazolate metal-organic framework (SIM-1) obtained by combining solid-state nuclear magnetic resonance and powder X-ray diffraction experiments with density functional theory calculations.

Photocatalytic carbon dioxide reduction with rhodium-based catalysts in solution and heterogenized within metal-organic frameworks.

The first photosensitization of a rhodium-based catalytic system for CO2 reduction is reported, with formate as the sole carbon-containing product. Formate has wide industrial applications and is seen as valuable within fuel cell technologies as well as an interesting H2 -storage compound. Heterogenization of molecular rhodium catalysts is accomplished via the synthesis, post-synthetic linker exchange, and characterization of a new metal-organic framework (MOF) Cp*Rh@UiO-67.

Determination of oxygen adsorption-desorption rates and diffusion rate coefficients in perovskites at different oxygen partial pressures by a microkinetic approach.

A novel, powerful method based on a microkinetic approach is described for the estimation of the oxygen transport parameters of mixed electronic conducting materials (MIECs). This method is validated on the perovskite La0.6Sr0.

Water adsorption in MOFs: fundamentals and applications.

This review article presents the fundamental and practical aspects of water adsorption in Metal-Organic Frameworks (MOFs). The state of the art of MOF stability in water, a crucial issue to many applications in which MOFs are promising candidates, is discussed here. Stability in both gaseous (such as humid gases) and aqueous media is considered.

Assessing chemical heterogeneity at the nanoscale in mixed-ligand metal-organic frameworks with the PTIR technique.

Recently, the use of mixtures of organic-building-block linkers has given chemists an additional degree of freedom for engineering metal-organic frameworks (MOFs) with specific properties; however, the poor characterization of the chemical complexity of such MixMOF structures by conventional techniques hinders the verification of rational design. Herein, we describe the application of a technique known as photothermal induced resonance to individual MixMOF microcrystals to elucidate their chemical composition with nanoscale resolution. Results show that MixMOFs isoreticular to In-MIL-68, obtained either directly from solution or by postsynthetic linker exchange, are homogeneous down to approximately 100 nm.