Trophic Transfer and Accumulation of Multiwalled Carbon Nanotubes in the Presence of Copper Ions in Daphnia magna and Fathead Minnow (Pimephales promelas).

The increase in use of nanomaterials such as multiwalled carbon nanotubes (MWCNTs) presents a need to study their interactions with the environment. Trophic transfer was measured between Daphnia magna and Pimephales promelas (fathead minnow, FHM) exposed to MWCNTs with different outer diameter (OD) sizes (MWCNT1 = 8-15 nm OD and MWCNT2 = 20-30 nm OD) in the presence and absence of copper. Pristine FHM were fed D.

Multiwalled Carbon Nanotubes Dramatically Affect the Fruit Metabolome of Exposed Tomato Plants.

Here, we reported that multiwalled carbon nanotubes (MWCNT) added to hydroponics system can enhance fruit production of exposed tomato plants. We quantified the exact amount of MWCNT accumulated inside of fruits collected by MWCNT-exposed plants using an advanced microwave induced heating technique (MIH). We found that absorption of MWCNT by tomato fruits significantly affected total fruit metabolome as was confirmed by LC-MS.

Graphene reflux: improving the yield of liquid-exfoliated nanosheets through repeated separation techniques.

Scalable production of graphene through liquid-phase exfoliation has been plagued by low yields. Although several recent studies have attempted to improve graphene exfoliation technology, the problem of separating colloidal nanosheets from unexfoliated parent material has received far less attention. Here we demonstrate a scalable method for improving nanosheet yield through a facile washing process.

Challenges in Liquid-Phase Exfoliation, Processing, and Assembly of Pristine Graphene.

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non-oxidized graphene) are described.

Vertical transport and plant uptake of nanoparticles in a soil mesocosm experiment.

Background: Agricultural soils represent a potential sink for increasing amounts of different nanomaterials that nowadays inevitably enter the environment. Knowledge on the relation between their actual exposure concentrations and biological effects on crops and symbiotic organisms is therefore of high importance. In this part of a joint companion study, we describe the vertical translocation as well as plant uptake of three different titanium dioxide (nano-)particles (TiO2 NPs) and multi-walled carbon nanotubes (MWCNTs) within a pot experiment with homogenously spiked natural agricultural soil and two plant species (red clover and wheat).

Determination of uptake, accumulation, and stress effects in corn (Zea mays L.) grown in single-wall carbon nanotube contaminated soil.

Single-wall carbon nanotubes (SWNTs) are projected to increase in usage across many industries. Two studies were conducted using Zea L. (corn) seeds exposed to SWNT spiked soil for 40 d.

Photodegradation of dispersants in colloidal suspensions of pristine graphene.

We demonstrate that UV degradation can remove polymeric dispersants from the surface of colloidal pristine graphene. In particular, we investigated the irradiation of polyvinylpyrrolidone (PVP)-dispersed graphene in water; this polymer has been established as a versatile nanosheet dispersant for a range of solvents, and it undergoes photo-oxidative degradation when exposed to UV light. We find that the molecular weight of PVP decreases with irradiation time and subsequently desorbs from the graphene surface.

Adsorption and removal of graphene dispersants.

We demonstrate three different techniques (dialysis, vacuum filtration, and spray drying) for removal of dispersants from liquid-exfoliated graphene. We evaluate these techniques for elimination of dispersants from both the bulk liquid phase and from the graphene surface. Thermogravimetric analysis (TGA) confirms dispersant removal by these treatments.

Tailored Crumpling and Unfolding of Spray-Dried Pristine Graphene and Graphene Oxide Sheets.

For the first time, pristine graphene can be controllably crumpled and unfolded. The mechanism for graphene is radically different than that observed for graphene oxide; a multifaced crumpled, dimpled particle morphology is seen for pristine graphene in contrast to the wrinkled, compressed surface of graphene oxide particles, showing that surface chemistry dictates nanosheet interactions during the crumpling process. The process demonstrated here utilizes a spray-drying technique to produce droplets of aqueous graphene dispersions and induce crumpling through rapid droplet evaporation.

Ultralow percolation threshold in aerogel and cryogel templated composites.

We demonstrate a novel concept for preparing percolating composites with ultralow filler content by utilizing nanofiller-loaded aerogel and cryogels as a conductive template. This concept is investigated for several porous systems, including resorcinol-formaldehyde (RF), silica, and polyacrylamide (PAM) gels, and both graphene and carbon nanotubes are utilized as nanofiller. In each case, a stable, aqueous nanofiller dispersion is mixed with a sol-gel precursor and polymerized to form a hydrogel, which can then be converted to an aerogel by critical point drying or cryogel by freeze-drying.

Rheology and morphology of pristine graphene/polyacrylamide gels.

Enhancement of toughness in nanomaterial-based hydrogels is a critical metric for many of their engineering applications. Pristine graphene-polyacrylamide (PAM) hydrogels are synthesized via in situ polymerization of acrylamide monomer in PAM-stabilized graphene dispersion. In-situ polymerization leads to the uniform dispersion of the graphene sheets in the hydrogel.

Determination of multi-walled carbon nanotube bioaccumulation in earthworms measured by a microwave-based detection technique.

Reliable quantification techniques for carbon nanotubes (CNTs) are limited. In this study, a new procedure was developed for quantifying multi-walled carbon nanotubes (MWNTs) in earthworms (Eisenia fetida) based on freeze drying and microwave-induced heating. Specifically, earthworms were first processed into a powder by freeze drying.

Dispersions of non-covalently functionalized graphene with minimal stabilizer.

We demonstrate that functionalized pyrene derivatives effectively stabilize single- and few-layer graphene flakes in aqueous dispersions. The graphene/stabilizer yield obtained by this method is exceptionally high relative to conventional nanomaterial stabilizers such as surfactants or polymers. The mechanism of stabilization by pyrene derivatives is investigated by studying the effects of various parameters on dispersed graphene concentration and stability; these parameters include stabilizer concentration, initial graphite concentration, solution pH, and type and number of functional groups and counterions.