Nanoscale, surface-confined phase separation by electron beam induced oxidation.

Electron-assisted oxidation of Co-Si-based focused electron beam induced deposition (FEBID) materials is shown to form a 2-4 nm metal oxide surface layer on top of an electrically insulating silicon oxide layer less than 10 nm thick. Differences between thermal and electron-induced oxidation on the resulting microstructure are illustrated.

Three-dimensional magnetic nanotextures with high-order vorticity in soft magnetic wireframes.

Additive nanotechnology enable curvilinear and three-dimensional (3D) magnetic architectures with tunable topology and functionalities surpassing their planar counterparts. Here, we experimentally reveal that 3D soft magnetic wireframe structures resemble compact manifolds and accommodate magnetic textures of high order vorticity determined by the Euler characteristic, χ. We demonstrate that self-standing magnetic tetrapods (homeomorphic to a sphere; χ = + 2) support six surface topological solitons, namely four vortices and two antivortices, with a total vorticity of + 2 equal to its Euler characteristic.

Gas-Phase Synthesis of Iron Silicide Nanostructures Using a Single-Source Precursor: Comparing Direct-Write Processing and Thermal Conversion.

The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (HSi)Fe(CO) precursor is converted into an inorganic material.

Pillar Growth by Focused Electron Beam-Induced Deposition Using a Bimetallic Precursor as Model System: High-Energy Fragmentation vs. Low-Energy Decomposition.

Electron-induced fragmentation of the HFeCo(CO) precursor allows direct-write fabrication of 3D nanostructures with metallic contents of up to >95 at %. While microstructure and composition determine the physical and functional properties of focused electron beam-induced deposits, they also provide fundamental insights into the decomposition process of precursors, as elaborated in this study based on EDX and TEM. The results provide solid information suggesting that different dominant fragmentation channels are active in single-spot growth processes for pillar formation.

Site-Selective Chemical Vapor Deposition on Direct-Write 3D Nanoarchitectures.

Recent advancements in additive manufacturing have enabled the preparation of free-shaped 3D objects with feature sizes down to and below the micrometer scale. Among the fabrication methods, focused electron beam- and focused ion beam-induced deposition (FEBID and FIBID, respectively) associate a high flexibility and unmatched accuracy in 3D writing with a wide material portfolio, thereby allowing for the growth of metallic to insulating materials. The combination of the free-shaped 3D nanowriting with established chemical vapor deposition (CVD) techniques provides attractive opportunities to synthesize complex 3D core-shell heterostructures.

Vanadium and Manganese Carbonyls as Precursors in Electron-Induced and Thermal Deposition Processes.

The material composition and electrical properties of nanostructures obtained from focused electron beam-induced deposition (FEBID) using manganese and vanadium carbonyl precursors have been investigated. The composition of the FEBID deposits has been compared with thin films derived by the thermal decomposition of the same precursors in chemical vapor deposition (CVD). FEBID of V(CO) gives access to a material with a V/C ratio of 0.

Direct Writing of Cobalt Silicide Nanostructures Using Single-Source Precursors.

Two new precursors for focused electron beam-induced deposition (FEBID) of cobalt silicides have been synthesized and evaluated. The HSiCo(CO) and HSi(Co(CO)) single-source precursors retain the initial metal ratios and show low sensitivity to changes in the FEBID parameters such as acceleration voltage, beam current, and precursor pressure. The precursors allow the direct writing of material containing ∼55 to 60 at % total metal/metalloid content combined with high growth rates.

Temperature-Dependent Growth Characteristics of Nb- and CoFe-Based Nanostructures by Direct-Write Using Focused Electron Beam-Induced Deposition.

Focused electron and ion beam-induced deposition (FEBID/FIBID) are direct-write techniques with particular advantages in three-dimensional (3D) fabrication of ferromagnetic or superconducting nanostructures. Recently, two novel precursors, HCo 3 Fe(CO) 12 and Nb(NMe 3 ) 2 (N--Bu), were introduced, resulting in fully metallic CoFe ferromagnetic alloys by FEBID and superconducting NbC by FIBID, respectively. In order to properly define the writing strategy for the fabrication of 3D structures using these precursors, their temperature-dependent average residence time on the substrate and growing deposit needs to be known.

Crystalline Niobium Carbide Superconducting Nanowires Prepared by Focused Ion Beam Direct Writing.

Superconducting planar nanostructures are widely used in applications, e.g., for highly sensitive magnetometers and in basic research, e.

Direct Synthesis of Hyperdoped Germanium Nanowires.

A low-temperature chemical vapor growth of Ge nanowires using Ga as seed material is demonstrated. The structural and chemical analysis reveals the homogeneous incorporation of ∼3.5 at.

First order reversal curves (FORC) analysis of individual magnetic nanostructures using micro-Hall magnetometry.

Alongside the development of artificially created magnetic nanostructures, micro-Hall magnetometry has proven to be a versatile tool to obtain high-resolution hysteresis loop data and access dynamical properties. Here we explore the application of First Order Reversal Curves (FORC)-a technique well-established in the field of paleomagnetism for studying grain-size and interaction effects in magnetic rocks-to individual and dipolar-coupled arrays of magnetic nanostructures using micro-Hall sensors. A proof-of-principle experiment performed on a macroscopic piece of a floppy disk as a reference sample well known in the literature demonstrates that the FORC diagrams obtained by magnetic stray field measurements using home-built magnetometers are in good agreement with magnetization data obtained by a commercial vibrating sample magnetometer.

Tunable magnetism on the lateral mesoscale by post-processing of Co/Pt heterostructures.

Controlling magnetic properties on the nanometer-scale is essential for basic research in micro-magnetism and spin-dependent transport, as well as for various applications such as magnetic recording, imaging and sensing. This has been accomplished to a very high degree by means of layered heterostructures in the vertical dimension. Here we present a complementary approach that allows for a controlled tuning of the magnetic properties of Co/Pt heterostructures on the lateral mesoscale.

Focused electron beam induced deposition: A perspective.

Background: Focused electron beam induced deposition (FEBID) is a direct-writing technique with nanometer resolution, which has received strongly increasing attention within the last decade. In FEBID a precursor previously adsorbed on a substrate surface is dissociated in the focus of an electron beam. After 20 years of continuous development FEBID has reached a stage at which this technique is now particularly attractive for several areas in both, basic and applied research.

Spontaneous dissociation of Co(2)(CO)(8) and autocatalytic growth of Co on SiO(2): A combined experimental and theoretical investigation.

We present experimental results and theoretical simulations of the adsorption behavior of the metal-organic precursor Co(2)(CO)(8) on SiO(2) surfaces after application of two different pretreatment steps, namely by air plasma cleaning or a focused electron beam pre-irradiation. We observe a spontaneous dissociation of the precursor molecules as well as autodeposition of cobalt on the pretreated SiO(2) surfaces. We also find that the differences in metal content and relative stability of these deposits depend on the pretreatment conditions of the substrate.

Universal conductance correction in a tunable strongly coupled nanogranular metal.

We present temperature-dependent conductivity data obtained on a sample set of nanogranular Pt-C with finely tuned intergrain tunnel coupling strength g. For samples in the strong-coupling regime g > g(C), characterized by a finite conductivity for T→0, we find a logarithmic behavior at elevated temperatures and a crossover to a √T behavior at low temperatures over a wide range of coupling strengths g(C) ≈ 0.25 < g ≤ 3.

Binary Pt-Si nanostructures prepared by focused electron-beam-induced deposition.

Binary systems of Pt-Si are prepared by electron-beam-induced deposition using the two precursors, trimethyl(methylcyclopentadienyl)platinum(IV) (MeCpPt(Me)(3)) and neopentasilane (Si(SiH(3))(4)), simultaneously. By varying the relative flux of the two precursors during deposition, we are able to study composites containing platinum and silicon in different ratios by means of energy-dispersive X-ray spectroscopy, atomic force microscopy, electrical transport measurements, and transmission electron microscopy. The results show strong evidence for the formation of a binary, metastable Pt(2)Si(3) phase, leading to a maximum in the conductivity for a Si/Pt ratio of 3:2.

A tunable strain sensor using nanogranular metals.

This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)(3)]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element.