In vitro assessment of NaF/Chit supramolecular complex: Colloidal stability, antibacterial activity and enamel protection against S. mutans biofilm.

Objectives: This study assessed the effect of NaF/Chit suspensions on enamel and on S. mutans biofilm, simulating application of a mouthrinse.

Methods: The NaF/Chit particle suspensions were prepared at molar ratio [NaF]/Chit]≈0.

Preparation and characterization of NaF/Chitosan supramolecular complex and their effects on prevention of enamel demineralization.

Fluoridated mouthrinse is indicated for individuals with high risk of caries. Chitosan (Chit) exhibits antibacterial properties, but little is known about its effects on enamel when combined with sodium fluoride (NaF) to form NaF/Chit supramolecular complexes. In our study, NaF/Chit supramolecular complexes structured as microparticles were synthetized and characterized, and their effects on human enamel were evaluated after cariogenic challenge simulating the daily mouthrinse use.

Which self-etch acidic composition may result in higher dental bonds at the long-term? A network meta-analysis review of in vitro studies.

Objectives: This review evaluated the effects of the acidic composition of self-etch (SE) adhesives at the long-term bond strengths to dentin and enamel.

Data: The review followed the PRISMA Extension Statement for network meta-analysis. Studies were identified by a systematic search in PubMed, Web of Science, and Scopus databases.

Possible Relationship Between the Oral and Gut Microbiome, Caries Development, and Obesity in Children During the COVID-19 Pandemic.

The COVID-19 pandemic has brought health damage and socioeconomic disruptions, together with lifestyle disorders around the world. Children are one of the most commonly affected, mainly due to social isolation and changes in eating habits and physical activities. This way, the risk of weight gain and obesity is possibly enhanced, as well as poor oral hygiene conditions and early childhood caries (ECC) development during the lockdown.

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge.

Objective: Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling.

Methodology: ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.

Effectiveness of Secondary Alveolar Bone Graft on Canine Eruption: Systematic Review.

There are controversies related to the effects of bone grafts on tooth eruption and impaction in patients with cleft lip and palate. The aim of this systematic review was to evaluate the effectiveness of bone grafting on eruption of canines in patients with unilateral cleft lip and palate (UCLP). An electronic search was conducted in six electronic databases and gray literature, without limitations on year of publication or language.

Effect of Orthodontic Treatment on Tooth Autotransplantation: Systematic Review of Controlled Clinical Trials.

This systematic review was focused on evaluating tooth autotransplantation, considering its impacts on the teeth, bone, soft tissues, and aesthetics in orthodontic patients. A bibliographic search was conducted without limitations on year of publication or language in the databases of PubMed, Web of Science, Scopus, Medline Complete, Cochrane, Clinical Trials, and Trials Central. For triage of articles, indications, surgical planning, orthodontic movement, risk factors for treatment, and long-term follow-ups were considered.

In Vivo Biocompatibility, Mechanical, and Antibacterial Properties of Cements Modified with Propolis in Different Concentrations.

Objectives:  The focus of this triple-blind randomized study was to evaluate the mechanical properties, antibacterial effect, and biocompatibility of glass ionomer cements (GICs) modified with ethanolic extracts of propolis (EEP).

Materials And Methods:  For biocompatibility tests, 135 male Wistar rats were used and divided into nine groups: Group C (control, polyethylene), Groups M, M10, M25, M50 (Meron; conventional, and modified with 10%, 25%, 50% EEP, respectively), Groups KC, KC10, KC25, KC50 (Ketac Cem; conventional, and modified with 10%, 25%, 50% EEP, respectively). The tissues were analyzed under an optical microscope for different cellular events in different time intervals.

Antimicrobial, mechanical and biocompatibility analysis of chlorhexidine digluconate-modified cements.

Background: The focus of this study was to evaluate the antimicrobial, mechanical properties and biocompatibility of glass ionomer (GICs) modified by Chlorhexidine (CHX).

Material And Methods: For biocompatibility, 105 male Wistar rats were used, divided into 7 groups (n=15): Group C (Control,Polyethylene), Groups M, M10, M18, and Groups RL, RL10, RL18 (M-Meron and RL-Riva Luting: conventional, and modified with 10%, and 18% CHX, respectively). The tissues were analyzed under optical microscope for different cellular events and time intervals.

Synthesis and characterization of TPP/chitosan nanoparticles: Colloidal mechanism of reaction and antifungal effect on C. albicans biofilm formation.

In the present study chitosan (Chit) nanoparticles were synthetized by the ionic gelation process, using tripolyphosphate (TPP) as crosslinking agent. The TPP/Chit nanoparticle formation was evaluated by titrations, measuring electrical conductivity (k), zeta potential (ZP), hydrodynamic diameter (D), viscosity (η) and heat by isothermal calorimetry (ITC). The antifungal effects were evaluated by C.

New generation bulk-fill resin composites: Effects on mechanical strength and fracture reliability.

Purpose: To investigate the mechanical performance and fracture reliability of new generation, bulk-fill resin composites of different viscosities.

Methods: Forty sound maxillary premolars were prepared into Class I cavities comprised of 5 mm width × 5 mm length × 5 mm thickness. The teeth were randomly allocated into four groups (n = 10) according to the restorative material: Negative control - without restoration; Positive control - conventional resin composite (Opallis; FGM) was applied using increments of up to 2.

Effect of chitosan nanoparticles on the inhibition of Candida spp. biofilm on denture base surface.

Objectives: Chitosan nanoparticles (ChNPs) have antifungal effects, however there is a lack of information about the effects of ChNPs against Candida biofilm on denture base surface. This study investigated the ChNPs effect against C. albicans biofilm adhesion and formation, and against Candida spp.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge.

The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Brackets were bonded to bovine incisors.

Influence of Different Dentin Substrate (Caries-Affected, Caries-Infected, Sound) on Long-Term μTBS.

The aim of this study was to evaluate the μTBS in different dentin substrates and water-storage periods. Twenty-four dentin blocks obtained from sound third molars were randomly divided into 3 groups: Sound dentin (Sd), Caries-affected dentin (Ca) and Caries-infected dentin (Ci). Dentin blocks from Ca and Ci groups were subjected to artificial caries development (S.

Antifungal activity, mode of action and anti-biofilm effects of Laurus nobilis Linnaeus essential oil against Candida spp.

Objective: The present study demonstrated the antifungal potential of the chemically characterized essential oil (EO) of Laurus nobilis L. (bay laurel) against Candida spp. biofilm adhesion and formation, and further established its mode of action on C.

Effect of Different Concentrations of Chlorhexidine in Glass-ionomer Cements on In Vivo Biocompatibility.

Purpose: To examine whether a difference exists between the in vivo biocompatibility of glass-ionomer cements (GICs) containing chlorhexidine (CHX) in different concentrations.

Materials And Methods: Eighty-four male Wistar rats were distributed into 7 groups (n = 12) and received subcutaneous implants of small tubes containing different materials, as follows: Ketac control (K), Ketac-CHX 10% (K10), Ketac-CHX 18% (K18), Resilience control (R), Resilience-CHX 10% (R10), Resilience-CHX 18% (R18), Control (polyethylene). The animals were then sacrificed on post-insertion days 7, 15 and 30, and tissues were examined under an optical microscope for inflammatory infiltrate, edema, necrosis, granulation tissue, multinucleated giant cells, and collagen fibers.

Thickness and nanomechanical properties of protective layer formed by TiF4 varnish on enamel after erosion.

The layer formed by fluoride compounds on tooth surface is important to protect the underlying enamel from erosion. However, there is no investigation into the properties of protective layer formed by NaF and TiF4 varnishes on eroded enamel. This study aimed to evaluate the thickness, topography, nanohardness, and elastic modulus of the protective layer formed by NaF and TiF4 varnishes on enamel after erosion using nanoindentation and atomic force microscopy (AFM).

In vitro effect of S. mutans biofilm on fluoride/MDPB-containing adhesive system bonded to caries-affected primary dentin.

Purpose: To evaluate the effect of storage in S. mutans culture or water on the durability of fluoride and MDPB-containing adhesive system on artificial caries-affected primary dentin.

Methods: Dentin flat surfaces of primary molars were submitted to artificial caries development using S.

Histological analysis of biocompatibility of ionomer cements with an acid-base reaction.

The purpose of this study was to evaluate the inflammatory and cure events of acid-based reactions using glass ionomer cement used for cementation of crowns, bridges, onlays and orthodontic bands implanted in subcutaneous tissue, at different time intervals. A total of 48 male Wistar rats were used, distributed into 4 groups (n = 12), as follows: Group C (control, polyethylene), Group ME (Meron), Group KC (Ketac Cem) and Group PR (Precedent). The animals were sacrificed after time intervals of 7, 15 and 30 days, and their tissues were analyzed under an optical microscope for such events as inflammatory infiltrate, edema, necrosis, granulation tissue, multinucleated giant cells, young fibroblasts and collagen.

In vitro effects of nano-hydroxyapatite paste on initial enamel carious lesions.

Purpose: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM).

Methods: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed.

In Vitro Effects of Nano-hydroxyapatite Paste on Initial Enamel Carious Lesions.

Purpose: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM).

Methods: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed.

In vivo biocompatibility versus degree of conversion of resin-reinforced cements in different time periods.

This study focused on test the null hypothesis that there is no difference between the degree of conversion and biocompatibility of different resin reinforced glass ionomer cements (RRGICs). Forty-eight male Wistar rats were used, distributed into four groups (n = 12), as follows: Group C (Control, polyethylene), Group FOB (Fuji Ortho Band), Group UBL (Ultra band Lok), and Group MCG (Multicure Glass), in subcutaneous tissue. The events of edema, necrosis, granulation tissue, multinuclear giant cells, young fibroblasts, and collagen formation were analyzed at 7, 15, and 30 days.

Protective effect of calcium nanophosphate and CPP-ACP agents on enamel erosion.

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h.

In vitro effect of calcium nanophosphate and high-concentrated fluoride agents on enamel erosion: an AFM study.

Background: Calcium nanophosphate paste can provide ions to remineralize enamel. There are, however, no data available about the remineralizing effect of this paste on the prevention of enamel erosion, when compared with highly concentrated fluoride agents.

Aim: To analyze the effect of calcium nanophosphate paste, fluoride gel, and varnish to protect against enamel erosion using surface Knoop hardness (KNH) and atomic force microscopy (AFM).

Influence of degree of conversion on the biocompatibility of different composites in vivo.

Purpose: To evaluate the relationship between biocompatibility and degree of monomer conversion of composites used to bond brackets to enamel, porcelain, resin, or metal surfaces at different time intervals.

Materials And Methods: Twenty-four male Wistar rats were used, divided into 4 groups (n = 6) as follows: group C (control, polyethylene), group TCC (Transbond Color Change), group QC (Quick-Cure), and group EB (Eagle Bond). These substances were inserted into subcutaneous tissue.